jersyboyy

iTrader: (8)

Prices reflect a 10-20% discount if you purchase something in the next 3 days otherwise they will be adjusted back. BUY NOW AND SAVE

I have a ton of interior plastics from thirdgen camaros mostly black too coolant resevoir z28 dash heater box stuff cigerette/rear defrost switch panel radio face plates center consoles shift plates .

Many hard to find little parts in good condition just ask (no 91-92 stuff tho).

I got a comp cam XE274H cam and lifters that is still in my motor I am willing to let go for 75 bucks. New with lifters its about 200 shipped!!!!

69 4 bolt main 010 camaro short block with 2 bad pistons. $300 bucks(a full rebuild kit with pistons from summit is 200 or pistons alone are 75)

Edelbrock performer rpm intake for pre 86 heads 100 obo

pair of 14" outlaw style wheels with tires(tires are crap one needs air in it but they both hold air) 25 bucks

85 10 bolt drum non posi 3.08 rear end. 75 bucks!

98 10 bolt rear end housing and axles no diff gears or brakes 50 bucks

pair of doors from a 85 camaro sportcoupe black mechanical windows no rust some dents on pass side have been bondoed 70 for the pair!

Two center consoles-Includes automatic shift plate top and bottom of console and lid

One is in pretty great condition lids perfect 70 bucks

The other is broken in two spots once installed looks great lid has a small tear in it, included is a lid cover(makes it not even noticable) 50 bucks

Ash trays 5 bucks

chrome valve covers with baffles on inside 10 bucks

hooker aero chamber exhaust system 200 miles of use on it new their 320 shipped ill do 200 bucks even

I got visors for ttop cars in black

I got the hartop headliner trim piece thats so hard to find

I got a ton of sub boxes

boxes for

2 10's this box has a glass dome on it and 4 port holes 20 bucks u come get it today

2 12's this box is one amazing custom sub box that makes massice bass its not a regular box in design by any means this specific box was custom made to produce BASS for a jeep or similar vehicle 200 new ill let it go for 70 obo bucks come check it out

1 12'& 1 15" hey you want it gimme 20 bucks and throw it in your jeep or ur truck w.e itll POUND with some subs in it

I got a custom sub box for a thirdgen camaro made for 2 10's carpeting job sucks but other than that its a massive box that makes alot of bass. 70 bucks obo



I also have a PERFECT condition black center console perfect in EVERY WAY not one broken clip tab or corner lids perfect too. If your willing to pay 120 for it then ill take it out of my car let me know


I also have a good condition pair of fenders from a 85 sportcoupe 40 for the pair or 25 each

Good condition front and rear bumper from a 85 sport coupe(front has brand new aftermarket fog lights in it too) 50 for the pair or 30 each


My email is brokenrider226@hotmail.com or text me Only text 732 801 4387
Located in central/north Jersey can meet up

I also have a beautiful 3 seater reclining tan microbfiber couch is any one is interested new it was 1000 i want 200 bucks!
I also have 80-90's sunbird headlights clear corner lights trunk and tail lights!

jersyboyy

iTrader: (8)

Any takers? Iv got door arm rests the plastic covers fo the seat tracks firebird ttop passenger a piller Im open to offers guys hit me with w.e you think is fare on an item!

iv also got a edelbrock performer rpm pre 86 non egr intake 90 shipped

irocvert90

iTrader: (1)

hey can i see some pics of the center console and the sub boxes

jersyboyy

iTrader: (8)

Sure do you have an email I can send them too?

irocvert90

iTrader: (1)

rsconv92@yahoo.com is email

MikeSmith0890

man i wished you lived closer to me..

jersyboyy

iTrader: (8)

Mike what do you need I can work with you man.

jersyboyy

iTrader: (8)

ANY INTEREST GUYS?

JTNKTZ

iTrader: (10)

Can you send pictures of valve covers to JTNKTZ@hotmail.com and will it fit a Reman 350?

89RS_82Z

iTrader: (2)

shifter plate and ashtrey in good to perfect shape (boot/shifter can be broke or ugly) i mainly need one with no cracks and a GOOD ashtrey lid that works properly, its just a base for a b&m shifter

jersyboyy

iTrader: (8)

Iv got an auto one with a decent ashtray but the area where the shifter markings (prndd21) the tab on hte back side broke.and their are two corners that are broken.

The good one Is gone .

But I still have the one out of my car on the perfect center console, if your willing t pay a decent amount for it ill pull that and ship it to ya.
Pm me

Ca[maro]88

iTrader: (2)

whats the difference between a performer RPM intake compared to an edelbrock performer manifold?

camarozz383

iTrader: (2)

hi do you have seat runner plastics that cover the nuts on the floor? also im looking for a couple of plastic pieces that go on the older camaro door handles where they bolt to the door.thanks

Stangski09

iTrader: (10)

Hey, is it a complete cam kit, as in I wouldn't need anything else. . Sorry I'm new to all this and don't know which cam to install in my car. 1988 GTA 5.7 litre bone stock. Plan on porting plenum and runners. If you could help and see if this would be a good cam that would be great.

tpicamarokid85

hey have you got the door sill pieces on the floor. the ones that cover the carpet right in front of the door when you open it? what kind of condition are they in and could you send pics? corvette_jc31@yahoo.com how much?

87SnowFlake

can i see pictures of the custom third gen sub box? How does it sit in the well? does it raise up and sit flush where the t-tops would sit? please send pics to fourx4eric33@yahoo.com. thank you!

87SnowFlake

wow. i just realized how old this thread is! oh well