[IN] parting out alot of camaros and a 92 ws6 look inside

Thread Tools
 
Search this Thread
 
Old 06-08-2010, 07:45 PM
  #1  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
parting out alot of camaros and a 92 ws6 look inside

Many many camaro and firebird parts, 82-92 model years and all parts pulled are not damaged and are useable
305 small block engine from with front accessories and exhaust manifolds $100
Gta trans am vented hood $75 needs a little work
92 trans am front nose $100
92 trans am door ground effects $40 each
92 trans am rocker ground effects $40 each
92 trans am quarter extensions $25 each
92 trans am rear bumper cover $75
91-92 trans am taillights in fair shape, small delamination but in overall good shape (two piece taillights) $200
91-92 trans am/gta two piece taillight wiring harness $100
tan trans am seats in good shape $150
tan door panels need cleaned $40
tan headliner in good shape $50 hard top
tan seatbelts $ 40
passenger and drivers side fenders $40 each
92 trans am passenger door $75
92 trans am headlight assemblies $50 each
90 firebird headlight assemblies $50 each
Camaro/firebird steering column with key $75
90-92 camaro/firebird steering column $75 2 available, one with firebird wheel
firebird steering column $50
85-92 complete front bumper with headlight bucket and bar $80
85-92 bumper skin with no headlight buckets or bar $50
front lower valance 85-90 style with no tears $75
front lower valance 85-90 with a couple small tears $40
82-92 firebird drivers front fender $40
2 82-92 camaro drivers side fenders $50 ea
many taillights $15 each
88-89 camaro low rise pedestal decklid spoiler $50
camaro/trans am decklid w/o glass $40
85-90 3pc rear deck spoilers $40
hatch pulldown motors $40 each
many many ground effect pieces email for pricing but have all pieces
rear bumper covers for 85-90 and 91-92 $50 each
Iroc front swaybar $40
iroc/ws6 steering brace (wonderbar) $40
V8 radiator in like new shape $75
dual fan setup with fans and brackets $75
1 15x7 5 spoke aluminum z28 wheels have tires on them but they are beyond shot, great for spares or to replace a single $20
16x8 silver iroc-z wheel. one wheel, has tire but not in great shape $25
Good fuel tank sending unit for carb (NO IN TANK PUMP) $30
starter $30
alternator (82-87) $40
power steering cooler line setup $20
torque arm mount $20
stock driveshafts $25
spindles $20 each
stock front lower a-arms $20 each
stock front and rear z28/iroc/ws6 springs $50
3.42 gear pbr brake 10 bolt posi rear end out of a 92 trans am with 100k miles. complete with brakes, and proportioning valve $350
5 speed clutch pedals
16x8 crosslace gta wheels with goodyear tires... have good tread but are dryrotted. probably still useable, lugs, caps, and wheels/tires included $400 black wheels.

sbc parts
accel 9000 plug wires $50 in the box
weiand 7546 aluminum intake manifold x celerator single plane $60
lt1 used water pump $25
94 iron head lt1 5.7ltr engine and harness. ran when pulled 100k miles $350

many many interior pieces
interior trim plastic in grey, black, tan
grey rear seat set $40
tan rear seat set $40
black arm rests $25
grey tan and red lower center consoles $30
speedometer clusters EMAIL FOR PRICING AND AVAILABLILITY
pioneer 2 way 4x6 dash speakers in great shape $30/pr
firebird dash pad with no damage whatsoever $100 each 2 available
92 trans am 140 mph speedometer cluster $100
black sunvisors $20 each
hatch shocks $15 each

many items available!!!! if you dont see it, please ask... i need the shop space so i need to let some stuff go

reasonable offers accepted. all items plus shipping

Im sure ive forgotten alot of things but this will do for now, doesnt hurt to ask me if i have it

thanks
Old 06-08-2010, 08:03 PM
  #2  
Senior Member
iTrader: (4)
 
campin1983's Avatar
 
Join Date: Apr 2008
Location: Crawfordsville, IN
Posts: 676
Likes: 0
Received 1 Like on 1 Post
Car: 1984 Camaro 'Vert
Engine: 350
Transmission: 700R4
Re: parting out alot of camaros and a 92 ws6 look inside

I'm looking for black carpets in good shape, full set of black or tan seatbelts with little/no fading, Z28 style 82-84 front bumper and Z28 hood with louvers. Please let me know if you happen to have any of that, and a price on it. I'm in Indiana too, so would likely be able to pick up larger items. Thanks.
Old 06-09-2010, 12:06 PM
  #3  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

i might be able to get the carpet... The 92 ws6 has tan seatbelts in it. The only z28 hood i have has blisters on it. I dont have any louvers currently.
Old 06-09-2010, 01:01 PM
  #4  
Senior Member
iTrader: (4)
 
campin1983's Avatar
 
Join Date: Apr 2008
Location: Crawfordsville, IN
Posts: 676
Likes: 0
Received 1 Like on 1 Post
Car: 1984 Camaro 'Vert
Engine: 350
Transmission: 700R4
Re: parting out alot of camaros and a 92 ws6 look inside

Could I get pics and a price for the carpet (if you can get it), seatbelts and the hood?

I think I read that your in Indy... if that's right, don't bother with shipping costs, I'm 40 min. away and can pick up.
Old 06-09-2010, 05:19 PM
  #5  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

i dont want to price the carpet until its in my hands.... The hood and seatbelts are in my posession... Got a guy wanting a complete tan interior also.

The hood with blisters id take 150 just to get it out of my hair... I had it painted but then changed my mind and went with a acsd ss hood... If you dont want the blisters thats fine too.

I am in indianapolis so yeah if you are from crawfordsville it would be silly to ship stuff unless it was small stuff that costed 4 or 5 bucks... even then id rather have it same day

pm me and ill give you my phone number... nice to meet some locals
Old 06-09-2010, 05:37 PM
  #6  
Senior Member
iTrader: (4)
 
campin1983's Avatar
 
Join Date: Apr 2008
Location: Crawfordsville, IN
Posts: 676
Likes: 0
Received 1 Like on 1 Post
Car: 1984 Camaro 'Vert
Engine: 350
Transmission: 700R4
Re: parting out alot of camaros and a 92 ws6 look inside

PM sent
Old 06-09-2010, 06:44 PM
  #7  
Supreme Member

iTrader: (8)
 
Maverick H1L's Avatar
 
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes on 4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Re: parting out alot of camaros and a 92 ws6 look inside

Any pass side Bird front fenders?
Old 06-09-2010, 11:09 PM
  #8  
Want a title? Post!
 
toddBreland's Avatar
 
Join Date: Nov 2008
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Re: parting out alot of camaros and a 92 ws6 look inside

how about a shifter plate for a 91 camaro? automatic overdrive.
Old 06-09-2010, 11:58 PM
  #9  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

Originally Posted by Maverick H1L
Any pass side Bird front fenders?
got a t/a front fender... non vented
Old 06-09-2010, 11:58 PM
  #10  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

Originally Posted by toddBreland
how about a shifter plate for a 91 camaro? automatic overdrive.
pretty sure i have one... ill have to look
Old 06-09-2010, 11:59 PM
  #11  
Want a title? Post!
 
toddBreland's Avatar
 
Join Date: Nov 2008
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Re: parting out alot of camaros and a 92 ws6 look inside

thx buddy
Old 06-10-2010, 05:39 PM
  #12  
Supreme Member

iTrader: (8)
 
Maverick H1L's Avatar
 
Join Date: Aug 2003
Location: LeRoy, NY
Posts: 7,240
Likes: 0
Received 5 Likes on 4 Posts
Car: 2003 Hyundai Tiburon GT
Engine: 2.7L V6
Transmission: 6-speed
Axle/Gears: 4.41
Re: parting out alot of camaros and a 92 ws6 look inside

If it has/had GFX, I'll pass.
Old 06-10-2010, 06:02 PM
  #13  
Junior Member
 
91_fbird's Avatar
 
Join Date: May 2010
Location: St. Louis, MO
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 Pontiac Firebird
Engine: SMall Block 350 TBI
Transmission: 5-Speed
Axle/Gears: Stock(for now)
Re: parting out alot of camaros and a 92 ws6 look inside

did you say rocker extensions...as in the gfx that extend from the front fenders down
Old 06-10-2010, 09:11 PM
  #14  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

Originally Posted by toddBreland
thx buddy
diddnt forget about you... ill know tomorrow
Old 06-10-2010, 09:12 PM
  #15  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

Originally Posted by Maverick H1L
If it has/had GFX, I'll pass.
yup... off a trans am
Old 06-10-2010, 09:12 PM
  #16  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

Originally Posted by 91_fbird
did you say rocker extensions...as in the gfx that extend from the front fenders down
i have 91-92 trans am ground effects yes
Old 06-11-2010, 10:44 AM
  #17  
Junior Member
 
91_fbird's Avatar
 
Join Date: May 2010
Location: St. Louis, MO
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 Pontiac Firebird
Engine: SMall Block 350 TBI
Transmission: 5-Speed
Axle/Gears: Stock(for now)
Re: parting out alot of camaros and a 92 ws6 look inside

if u could send me some pics i would b very interested in purchasing those front two fender ground effects.....very interested. PM me
Old 06-11-2010, 12:32 PM
  #18  
Junior Member
 
MrBeefy334's Avatar
 
Join Date: Sep 2007
Location: Dothan, Alabama
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 IROC-Z
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: 3.73
Re: parting out alot of camaros and a 92 ws6 look inside

How much for the dual fan setup and 5 speed clutch pedals shipped to 36303 please?
Old 06-11-2010, 07:14 PM
  #19  
Junior Member
 
91_fbird's Avatar
 
Join Date: May 2010
Location: St. Louis, MO
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 Pontiac Firebird
Engine: SMall Block 350 TBI
Transmission: 5-Speed
Axle/Gears: Stock(for now)
Re: parting out alot of camaros and a 92 ws6 look inside

if u have the pieces im talkin about im interested
Old 06-12-2010, 08:10 PM
  #20  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

Originally Posted by 91_fbird
if u have the pieces im talkin about im interested
the drivers side is missing... passenger is there
Old 06-13-2010, 12:41 AM
  #21  
Junior Member
 
91_fbird's Avatar
 
Join Date: May 2010
Location: St. Louis, MO
Posts: 47
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 Pontiac Firebird
Engine: SMall Block 350 TBI
Transmission: 5-Speed
Axle/Gears: Stock(for now)
Re: parting out alot of camaros and a 92 ws6 look inside

aw man.....hows the passenger look?
Old 06-15-2010, 05:08 PM
  #22  
Junior Member
iTrader: (1)
 
89Firebin's Avatar
 
Join Date: Aug 2009
Location: ND
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
Car: 89 Firebird Formula 350
Engine: 1974 350
Transmission: '84 Trans Am T5
Axle/Gears: Borg warner 3.27
Re: parting out alot of camaros and a 92 ws6 look inside

Would you happen to have a 5 speed shifter plate for an 89 Firebird? Thanks.
Old 06-15-2010, 06:45 PM
  #23  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

Originally Posted by 91_fbird
aw man.....hows the passenger look?
i havent totally removed it yet but it appears to be in good shape
Old 06-15-2010, 06:45 PM
  #24  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

Originally Posted by 89Firebin
Would you happen to have a 5 speed shifter plate for an 89 Firebird? Thanks.
nope i just replaced the broken one in the 88 gta we have at the shop

sorry
Old 06-15-2010, 07:02 PM
  #25  
Junior Member
iTrader: (1)
 
89Firebin's Avatar
 
Join Date: Aug 2009
Location: ND
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
Car: 89 Firebird Formula 350
Engine: 1974 350
Transmission: '84 Trans Am T5
Axle/Gears: Borg warner 3.27
Re: parting out alot of camaros and a 92 ws6 look inside

Whats broken about it I may be interested lol.
Old 06-15-2010, 07:12 PM
  #26  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

it was broken and glued back together around the window switches and had an area broken around the ashtray i believe... id have to dig it back out
Old 06-16-2010, 12:54 PM
  #27  
Junior Member

 
k_irocz's Avatar
 
Join Date: Jan 2005
Location: Ypsilanti, MI
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
Car: 1987 IROC-Z
Engine: 5.7L 350 TPI
Transmission: 700R4 w/ Transgo
Axle/Gears: 3.27 BW Posi
Re: parting out alot of camaros and a 92 ws6 look inside

Any stock grey GM floor mats?
Old 06-16-2010, 04:13 PM
  #28  
Member

 
rdsxfn524's Avatar
 
Join Date: Sep 2009
Posts: 139
Likes: 0
Received 0 Likes on 0 Posts
Re: parting out alot of camaros and a 92 ws6 look inside

I need fender ground fx for my 85 T/A
Old 06-27-2010, 12:19 PM
  #29  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

Originally Posted by rdsxfn524
I need fender ground fx for my 85 T/A
which side?
Old 06-27-2010, 12:20 PM
  #30  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

Originally Posted by ls1>*
i havent totally removed it yet but it appears to be in good shape
the passenger side is in good shape
Old 06-28-2010, 10:53 PM
  #31  
Want a title? Post!
 
billjohnson_76@'s Avatar
 
Join Date: Aug 2006
Location: iowa
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Car: 83 T\A crossfire
Engine: lu5
Transmission: T-5 :) added
Axle/Gears: 3:23 posi stock
Re: parting out alot of camaros and a 92 ws6 look inside

I swapped a t-5 into my '83 cfi t/a and need a manual insert with upper shift boot for the center console just the plate would be ok too as the boots are easy to find new
Old 06-30-2010, 11:38 PM
  #32  
Supreme Member

 
92RS(real slow)'s Avatar
 
Join Date: Sep 2005
Location: Osceola Indiana
Posts: 2,151
Likes: 0
Received 0 Likes on 0 Posts
Car: 92 RS(sold) 1989 IROC-Z
Engine: 350 TPI
Transmission: 700R4
Axle/Gears: ones that turn
Re: parting out alot of camaros and a 92 ws6 look inside

do you still have the 3.42 rear? are you wiling to meet like half way I live in south bend all the way at the top of indiana
Old 07-02-2010, 01:27 PM
  #33  
Senior Member

 
Kevs87TA's Avatar
 
Join Date: Feb 2002
Location: Cambridge, Ontario, Canada
Posts: 956
Likes: 0
Received 0 Likes on 0 Posts
Car: 1990 GTA
Engine: L98 5.7 L
Transmission: 700R
Axle/Gears: 3.45 9 Bolt
Re: parting out alot of camaros and a 92 ws6 look inside

The tan front seats? are they leather or cloth? also need the two cup/map holders for the door panels.
Let me know what you have,
Thanks

Last edited by Kevs87TA; 07-02-2010 at 01:35 PM.
Old 07-03-2010, 01:17 AM
  #34  
Junior Member
 
josh1393's Avatar
 
Join Date: Jan 2008
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Re: parting out alot of camaros and a 92 ws6 look inside

I'm looking for a complete set of interior plastics in black. thanks
Old 07-03-2010, 01:35 PM
  #35  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

Originally Posted by Kevs87TA
The tan front seats? are they leather or cloth? also need the two cup/map holders for the door panels.
Let me know what you have,
Thanks
Cloth
Old 07-04-2010, 08:55 AM
  #36  
Want a title? Post!
 
kdiddy1514's Avatar
 
Join Date: Jul 2008
Location: Montgomery,Ill
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Car: 89 Screemin Chicken GTA
Engine: L98 (Almost stock)
Transmission: 700r4 w/servo
Axle/Gears: B/W 9bolt 327 gears
Re: parting out alot of camaros and a 92 ws6 look inside

Im looking for a headlight motor for my 89. Zip is 60538
Old 07-04-2010, 04:35 PM
  #37  
Want a title? Post!
 
FNRIVERA's Avatar
 
Join Date: Jul 2007
Location: Piscataway, NJ 08854
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Car: 92 Z28
Engine: 5.7
Transmission: auto
Re: parting out alot of camaros and a 92 ws6 look inside

Hello, I am in need for a hatch lid that does not have a spoiler. Its for a 92 z28 with a wing. Wing not needed just lid. If you have them please send pics and price with shipping to FNRIVERA@OPTONLINE.NET. I am in Piscataway, NJ 08854
Old 07-05-2010, 12:35 PM
  #38  
Supreme Member

iTrader: (5)
 
Tom91Bird's Avatar
 
Join Date: May 2001
Location: Naples, FL
Posts: 1,055
Likes: 0
Received 0 Likes on 0 Posts
Car: 1991 Firebird
Engine: 383 stroker
Transmission: T-56
Re: parting out alot of camaros and a 92 ws6 look inside

PM sent
Old 07-05-2010, 08:31 PM
  #39  
Senior Member

iTrader: (3)
 
zimmstoy's Avatar
 
Join Date: Jul 2001
Location: Richardson, TX
Posts: 529
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 Iroc
Engine: 305 LB9
Transmission: 700r4
Axle/Gears: 3.27
Re: parting out alot of camaros and a 92 ws6 look inside

If you still have the following I would be interested in some pictures and pricing.

Would you be willing to separate the PBR Rear Disc Setup from the rear end?
If so - how much?

5 speed clutch pedals - how much?


16x8 crosslace gta wheels with goodyear tires... have good tread but are dryrotted. probably still useable, lugs, caps, and wheels/tires included $400 black wheels. - what kind of shape are the wheels in?
Old 07-09-2010, 02:33 AM
  #40  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

Originally Posted by zimmstoy
If you still have the following I would be interested in some pictures and pricing.

Would you be willing to separate the PBR Rear Disc Setup from the rear end?
If so - how much?

5 speed clutch pedals - how much?


16x8 crosslace gta wheels with goodyear tires... have good tread but are dryrotted. probably still useable, lugs, caps, and wheels/tires included $400 black wheels. - what kind of shape are the wheels in?

the rear is gone...

5 speed pedals i think i said 60

the wheels are in good structural shape but will need to be done over to be show quality
Old 07-12-2010, 06:09 PM
  #41  
Supreme Member

iTrader: (1)
 
Stevolwevol's Avatar
 
Join Date: Nov 2008
Location: Michigan
Posts: 1,697
Received 1 Like on 1 Post
Car: 86 IROC Z, 92 RS
Engine: 305 4bbl, 305 TBI
Re: parting out alot of camaros and a 92 ws6 look inside

I am looking for tan plastic bolts for the panels in the back, a role cover, and tan caps that cover the rear hatch shocks...
Old 07-12-2010, 06:42 PM
  #42  
Member
iTrader: (1)
 
XxXChrisGXxX's Avatar
 
Join Date: Feb 2008
Location: Connecticut
Posts: 463
Likes: 0
Received 0 Likes on 0 Posts
Car: 1987 Chevrolet Camaro
Engine: 2.8L V6 MPFI
Transmission: 700R4
Axle/Gears: 10 Bolt
Re: parting out alot of camaros and a 92 ws6 look inside

any v6 85-89 gauge cluster with the actual gauges for temp, oil, etc.
Old 07-12-2010, 09:10 PM
  #43  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

i have the 110 mph firebird clusters $50

i do not have any cargo covers but i have the tan nuts and pieces
Old 07-12-2010, 09:38 PM
  #44  
Supreme Member

iTrader: (1)
 
Stevolwevol's Avatar
 
Join Date: Nov 2008
Location: Michigan
Posts: 1,697
Received 1 Like on 1 Post
Car: 86 IROC Z, 92 RS
Engine: 305 4bbl, 305 TBI
Re: parting out alot of camaros and a 92 ws6 look inside

I could use the tan screws. What do ya want for them?
Old 07-13-2010, 10:33 AM
  #45  
Supreme Member

iTrader: (4)
 
Codename 47's Avatar
 
Join Date: Apr 2003
Location: Madison, WI
Posts: 1,230
Likes: 0
Received 2 Likes on 2 Posts
Car: 1986 Camaro Z28
Engine: 400
Transmission: T5
Axle/Gears: 10 bolt Posi 3.73
Re: parting out alot of camaros and a 92 ws6 look inside

Do you have a drivers side door handle (the inside one). I think they were always black, which is what I need. If you had a picture that would be great, just for me to double check what I'm buying is what I need

Thanks

Greg
Old 07-13-2010, 12:28 PM
  #46  
Supreme Member

iTrader: (1)
 
Stevolwevol's Avatar
 
Join Date: Nov 2008
Location: Michigan
Posts: 1,697
Received 1 Like on 1 Post
Car: 86 IROC Z, 92 RS
Engine: 305 4bbl, 305 TBI
Re: parting out alot of camaros and a 92 ws6 look inside

I mean the large plastic screws that hold the spare tire cover and other covers in the back of the car
Old 07-13-2010, 12:31 PM
  #47  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

Originally Posted by Codename 47
Do you have a drivers side door handle (the inside one). I think they were always black, which is what I need. If you had a picture that would be great, just for me to double check what I'm buying is what I need

Thanks

Greg

im sure i do
Old 07-14-2010, 01:42 AM
  #48  
Junior Member

 
80s Poncho's Avatar
 
Join Date: Sep 2009
Location: Iowa
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Car: 1989 Pontiac Formula /1985 Trans Am
Engine: TPI 350 / TPI 305
Transmission: 5 Speed / 4 Speed Auto
Axle/Gears: 323
Re: parting out alot of camaros and a 92 ws6 look inside

Do you still have the tan head liner? If so will it fit a 89 Formula? If so how much to ship it to 52403. Also do you have a hatch cover that has the cut outs for the roll out privacy shade to lock in to.

Thanks
Old 07-14-2010, 02:08 AM
  #49  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

Originally Posted by Stevolwevol
I mean the large plastic screws that hold the spare tire cover and other covers in the back of the car
i know what you are talking about
Old 07-14-2010, 02:08 AM
  #50  
Member

Thread Starter
iTrader: (32)
 
ls1>*'s Avatar
 
Join Date: Oct 2003
Location: Indiana
Posts: 448
Likes: 0
Received 2 Likes on 1 Post
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
Re: parting out alot of camaros and a 92 ws6 look inside

Originally Posted by 80s Poncho
Do you still have the tan head liner? If so will it fit a 89 Formula? If so how much to ship it to 52403. Also do you have a hatch cover that has the cut outs for the roll out privacy shade to lock in to.

Thanks

I pitched the headliner due to lack of interest/space, and the car diddnt have a cargo cover... sorry


Quick Reply: [IN] parting out alot of camaros and a 92 ws6 look inside



All times are GMT -5. The time now is 03:41 PM.