Autometer mech. speedo problem
#1
Junior Member
Thread Starter
Join Date: Feb 2009
Location: milford nj
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Iroc-z
Engine: worked 350tpi
Transmission: built 700r4
Axle/Gears: auburn pos 4-10
Autometer mech. speedo problem
I have an 86 iroc, i made my own dash cluster with autometer phantom gauges im using a mechanical speedometer with cable i didnt know that the original cluster had a vss attached, now i have vss trouble codes and esc.Does any one know if there is a way to correct this problem?Maybe an after market vss that will work i cant seem to find anything that will fix the issue.I also dont have the old cluster anymore so cant salvage the vss if it would have worked or not i dont know. I would appreciate any suggestions thanks
#2
Member
iTrader: (3)
Join Date: Jun 2003
Location: Newmarket, NH
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91Z28
Engine: 305
Transmission: WC T-5
Axle/Gears: 10 Bolt Posi, 3.08
Re: Autometer mech. speedo problem
Go here: http://jagsthatrun.com/Pages/SpeedSe...eedometer.html Check out those. I am using the same thing as #1 on my 91 with the same speedo. basically you unscrew the cable, screw on the adapter, screw on the cable and hook those two wires in to your VSS wiring.
#3
Junior Member
Thread Starter
Join Date: Feb 2009
Location: milford nj
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Iroc-z
Engine: worked 350tpi
Transmission: built 700r4
Axle/Gears: auburn pos 4-10
Re: Autometer mech. speedo problem
Thanks for your help i went on the site and ordered one,great simple solution
Thread
Thread Starter
Forum
Replies
Last Post
IROCZDAVE (88-L98)
Engine/Drivetrain/Suspension Parts for Sale
1
11-19-2015 07:03 AM