88 iroc door panels diagonal divide or straight
#1
Member
Thread Starter
Join Date: Jul 2009
Location: south of sa tx
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 iroc vert undergoing resto
Engine: 5.0 tpi
Transmission: beefy 700r4 rdeglcltch vetserv t/go
Axle/Gears: g92 b/w
88 iroc door panels diagonal divide or straight
hey guys have an 88 iroc vert that i just orderd door panels for from 1a auto they sent me a message saying that they thought it wouldn't fit my car right now i have the set with the diagonal divide on them which i like better all of the diagonal sets i've see say for 89 -92 i'm sure they will fit am i missing something here is my car supposed to have the straight line panels in it? the diagonal panels will work right? my old ones did... if the straight panels fit 86-92 y wouldn't one from 89-92 fit an 88 just not be correct due to the style
diag line 89-92
http://www.1aauto.com/1A/Interior/Ch...P00051/1169195
straight line 86-92
http://www.1aauto.com/1A/Interior/Ch...P00024/1169188
diag line 89-92
http://www.1aauto.com/1A/Interior/Ch...P00051/1169195
straight line 86-92
http://www.1aauto.com/1A/Interior/Ch...P00024/1169188
#2
Member
Thread Starter
Join Date: Jul 2009
Location: south of sa tx
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 iroc vert undergoing resto
Engine: 5.0 tpi
Transmission: beefy 700r4 rdeglcltch vetserv t/go
Axle/Gears: g92 b/w
Re: 88 iroc door panels diagonal divide or straight
no comments on this guys
#3
Supreme Member
Join Date: Sep 2002
Location: Cary, North Carolina
Posts: 9,192
Likes: 0
Received 16 Likes
on
16 Posts
Car: 1992 RS
Engine: Carbed 350
Transmission: 700R4
Axle/Gears: 3.42 posi
Re: 88 iroc door panels diagonal divide or straight
Diagonal Schmiagonal - I would think either panel will fit the same - doors didn't change, so shape is the same - personal preference as to which style. The ONLY difference I saw was the third hole at the armrest, but since trhe armrest covers it anyway, who cares?
What about window crank holes - do they all come with them? I see the hole on one, not on the other, but it is black - It'd be nice to know abount since I have electric windows, and may need new panels soon.
What about window crank holes - do they all come with them? I see the hole on one, not on the other, but it is black - It'd be nice to know abount since I have electric windows, and may need new panels soon.
Last edited by camaronewbie; 08-31-2009 at 07:33 PM.
#4
Supreme Member
iTrader: (10)
Join Date: Oct 2007
Location: Fl.
Posts: 1,881
Likes: 0
Received 2 Likes
on
2 Posts
Car: 83 Trans Am / 96 Jeep XJ
Engine: 355 / 4.0 I6
Transmission: TH350 / Auto
Axle/Gears: 3.23 10-bolt / 4wd
Re: 88 iroc door panels diagonal divide or straight
All camaro panels from 1982 through 1992 will fit any camaro in that same range of years. The differences only lie in the styling. The straight line style may be 'period correct' for the earlier year'd camaros, and the diagonal ones may be 'period correct' for the later years, but, you could just as easily put a door panel from an 82 camaro on a 92, as you could put a 92 door panel on an 82. They'll fit, it just depends on your preference.
#6
Former Sponsor
Re: 88 iroc door panels diagonal divide or straight
I just got a reply back from the upholstery shop and was told,as far as they know that the amount of holes for the door pull were different.
The straight design had three near the bottom where the diagonal design has two.
I haven't messed around over here with any of these,so feel free to add to this if you guys have interchanged panels and what mods were needed to make the change.
Tony
The straight design had three near the bottom where the diagonal design has two.
I haven't messed around over here with any of these,so feel free to add to this if you guys have interchanged panels and what mods were needed to make the change.
Tony
#7
Supreme Member
iTrader: (1)
Join Date: Aug 2008
Location: Short Summer, VT
Posts: 1,485
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1985 Trans Am T-Top
Engine: 305 TPI
Transmission: T-5 5 Speed
Axle/Gears: 3.42 posi 1LE 10 bolt
Re: 88 iroc door panels diagonal divide or straight
I think the 89+ also have an extra metal bracket riveted or welded to the door. So if you put it on the straight style, you'll need that bracket or make one.
Trending Topics
#8
Member
Thread Starter
Join Date: Jul 2009
Location: south of sa tx
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 iroc vert undergoing resto
Engine: 5.0 tpi
Transmission: beefy 700r4 rdeglcltch vetserv t/go
Axle/Gears: g92 b/w
Re: 88 iroc door panels diagonal divide or straight
thanks guys for all of the replies i am sure they will fit also i will confire about bracket when i find out thank tony
as far as the window crank holes i was told that it was a prefforated circle that could be popped out if needed
as far as the window crank holes i was told that it was a prefforated circle that could be popped out if needed
#9
Junior Member
Join Date: Nov 2008
Location: Reisterstown
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 305 c.i. T.B.I.
Transmission: TH700R4
Axle/Gears: stock open 2.72
Re: 88 iroc door panels diagonal divide or straight
on another note, i'm making some custom door panels and i'm not sure what i should use as backing board
#11
Former Sponsor
Re: 88 iroc door panels diagonal divide or straight
T
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
IROCZDAVE (88-L98)
Interior Parts for Sale
4
10-06-2016 09:08 AM
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM