Sound Deadening
#1
Member
Thread Starter
Join Date: Nov 2009
Location: Middle of Nowhere, SC
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro Sports Coupe
Engine: 355 chev
Transmission: none at the time
Axle/Gears: stock 10bolt v6 gears
Sound Deadening
I'm looking around for options on some sound deadener. Dynamats expensive, so i'm looking at cheeper options.
Ebay sells 100sq ft, of 50 mil at 90 bucks. is it worth it?
They also sell 80 mil. Is this a bunch of extra weight that i dont need?
http://cgi.ebay.com/ebaymotors/100-S...item3effd69192
Ebay sells 100sq ft, of 50 mil at 90 bucks. is it worth it?
They also sell 80 mil. Is this a bunch of extra weight that i dont need?
http://cgi.ebay.com/ebaymotors/100-S...item3effd69192
#3
Senior Member
Join Date: Jul 2009
Posts: 752
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z28
Engine: 5.7 TPI
Transmission: 700R4
Re: Sound Deadening
#4
Supreme Member
iTrader: (2)
Join Date: Nov 2000
Location: Newington, CT
Posts: 1,021
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 IROC
Engine: 5.7 RamJet
Transmission: T56
Axle/Gears: Dana44 4.10
Re: Sound Deadening
http://secondskinaudio.com/
Excellent products, good price, and top notch customer service. I'll personally never use anything else.
Excellent products, good price, and top notch customer service. I'll personally never use anything else.
Trending Topics
#8
Senior Member
iTrader: (3)
Re: Sound Deadening
I bought the Fat Mat 'rattletrap' off Ebay for $159.00 with free shipping. I'm about 95% done. It will be enough to do your entire vehicle. Twin_Turbo has the same looking stuff in his second photo. And, as Malaka stated, it's VERY time consuming. If you do the job by yourself, realistically expect to spend at least 20 hours doing the entire interior. I'm actually just finishing the job today and will post photos later this week. Very tedious and unfortunately, these cars don't have many flat spots; it's all curves and contours. The below photo is of a closeup of another car but will show you how much cutting is needed as well as the fact that it won't cover every square inch; there will still be blank spaces, as shown.
A search of ebay for: 'Rattletrap Fat Mat' will show you current prices
A search of ebay for: 'Rattletrap Fat Mat' will show you current prices
Last edited by majobis; 07-04-2011 at 01:08 PM. Reason: added photo
#9
Supreme Member
iTrader: (25)
Re: Sound Deadening
Yes, the part with the blue script on it is rattle trap. It was more expensive than the other plain stuff and it's not better. It's thinner and doesn't stick nearly as well, you really need a heat gun to get it to stick on compound curves or other oddly shaped surfaces. The cheaper stuff worked a lot better for me.
#10
Supreme Member
Join Date: Oct 2001
Location: NWOhioToledoArea
Posts: 8,113
Likes: 0
Received 5 Likes
on
5 Posts
Car: 86-FireBird
Engine: -MPFI
Transmission: T5
Axle/Gears: 3:42
Re: Sound Deadening
I had a big thread goin once, ill just repost what I found here.
I did go with SmittyMats in the end as it was big with the Vette crowd for its light weight but effectiveness. Got it off ebay, they got stuff listed all the time but should of used their reg store, if you search on their name you can find discount codes all over, there is a link to one below.
"Dynamat and other sound heat and vib mats: Compare
So who all is using Dynamat sound heat and vib mats???
Anyone using other brands???
Man are them things pricy.
$28 for 2 10"x10" pieces of Dynamat
http://www.dynamat.com/store/store-car.asp
Some roll on crap
http://www.quietcar.net/?gclid=CKvz9...FQIWFQodaVy9HQ
Stuff called 2nd skin that is pricy like dyna
http://www.secondskinaudio.com/
And I found smitty mats about 1/3 the pirce of them all.
http://SmittyMats.com/
Look like everyone sell the same basic stuff, those that sponsor racing and have adds on TV just charge out the BLEEP for it............ Also a friend who got dynamat form summit just the other day the salesmen said the price will be going up here soon.
Just hard to spend that much but want some comments.
---
Oops for got one
http://www.hushmat.com/new/ Performance/index.htm
Starter Kit - 4 square feet
$40.00
Thats 4 12x12 squares for $10 each, man do you know how many it would take to do the inide of my car???
That $2sqft stuff looks better and better.
Its also on ebay with good reviews.
Anyone have pic's they can share of a sound vib mat install in your car or what not???
And how much you spent if that not like asking a woman her age for you.
---
http://www.tjoos.com/Coupon/144326/Smittymats.com
--
Reguarding the other post, I went with Smitty for the weight issue.
As I do not need a bunch of weight only running a small 2.8 v6
http://SmittyMats.com "
I did go with SmittyMats in the end as it was big with the Vette crowd for its light weight but effectiveness. Got it off ebay, they got stuff listed all the time but should of used their reg store, if you search on their name you can find discount codes all over, there is a link to one below.
"Dynamat and other sound heat and vib mats: Compare
So who all is using Dynamat sound heat and vib mats???
Anyone using other brands???
Man are them things pricy.
$28 for 2 10"x10" pieces of Dynamat
http://www.dynamat.com/store/store-car.asp
Some roll on crap
http://www.quietcar.net/?gclid=CKvz9...FQIWFQodaVy9HQ
Stuff called 2nd skin that is pricy like dyna
http://www.secondskinaudio.com/
And I found smitty mats about 1/3 the pirce of them all.
http://SmittyMats.com/
Look like everyone sell the same basic stuff, those that sponsor racing and have adds on TV just charge out the BLEEP for it............ Also a friend who got dynamat form summit just the other day the salesmen said the price will be going up here soon.
Just hard to spend that much but want some comments.
---
Oops for got one
http://www.hushmat.com/new/ Performance/index.htm
Starter Kit - 4 square feet
$40.00
Thats 4 12x12 squares for $10 each, man do you know how many it would take to do the inide of my car???
That $2sqft stuff looks better and better.
Its also on ebay with good reviews.
Anyone have pic's they can share of a sound vib mat install in your car or what not???
And how much you spent if that not like asking a woman her age for you.
---
http://www.tjoos.com/Coupon/144326/Smittymats.com
--
Reguarding the other post, I went with Smitty for the weight issue.
As I do not need a bunch of weight only running a small 2.8 v6
http://SmittyMats.com "
Last edited by Gumby; 06-07-2010 at 12:37 PM.
#11
Supreme Member
Join Date: Oct 2001
Location: NWOhioToledoArea
Posts: 8,113
Likes: 0
Received 5 Likes
on
5 Posts
Car: 86-FireBird
Engine: -MPFI
Transmission: T5
Axle/Gears: 3:42
Re: Sound Deadening
1 tip get the tape, I cheaped out n tried to use chrome duct tape the first time, which was soon hanging lose, now the sticky part of the tape was still there but the outter covering was lose, that aluminum tape that comes in the kits is awesome stuff.
Have ordered twice now.
Have ordered twice now.
Thread
Thread Starter
Forum
Replies
Last Post