Interior Rear View Mirror
#1
Junior Member
Thread Starter
Join Date: Nov 2010
Location: Lancaster, PA
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro Z28
Engine: 305 V8 (5.0L) TPI
Transmission: 700R4
Axle/Gears: 2.73
Interior Rear View Mirror
Ok, so I have a 91 Z28 and the other day when polishing the interior my elbow knocked the rear view mirror off. Instead of putting it back on again I decided that I should get the "reading" lights on it fixed first. I couldn't figure out how to get to the bulbs in the lights to replace them. If someone could help that would be greatly appreciated Also telling me the bulb size I would need for the lights will also be appreciated. THANK YOU!
#2
Senior Member
iTrader: (1)
Join Date: Jan 2008
Location: Destin, Florida
Posts: 618
Likes: 0
Received 11 Likes
on
11 Posts
Car: 91 Trans Am Convertible
Engine: LB9 5.0 TPI
Transmission: 5 SPD
Axle/Gears: Posi Rear
Re: Interior Rear View Mirror
If they are the same as the Pontiac's lamps, they just pop out in a downward direction (with the mirror in the normal position). Use a small, narrow blade screw driver and insert it between the left or right edge of each lens and the mirror frame. Be gentle and the lens and bulb socket assembly will drop right out. Sorry, I do not know the bulb size.
#3
Supreme Member
Re: Interior Rear View Mirror
They use 194 bulbs. If you have the third light in yours, it uses a smaller 74 bulb.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM