Interior plastics
#1
Junior Member
Thread Starter
Join Date: Jan 2013
Location: Jacksonville,fl
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 camaro
Engine: 5.0
Transmission: 700-r4
Interior plastics
Dose anyone sell these brand new Iv been looking for a while now and can only find used ones I'm wanting to go from the gray panels to the black ones
#2
Supreme Member
iTrader: (2)
Re: Interior plastics
I've never seen them.
And all the ones in good condition cost a pretty penny.
If you'd like to save yourself alot of money, and have the time, you could dye the plastics. My job cost me about $30 and a Saturday for prep/paint then the entire Sunday afternoon installing, but now it looks brand new. Paint holds up well to typical flexing/scratching.
here's my thread:
https://www.thirdgen.org/forums/inte...storation.html
This guy redid his in the factory color with some slightly different materials:
https://www.thirdgen.org/forums/inte...ic-carpet.html
And all the ones in good condition cost a pretty penny.
If you'd like to save yourself alot of money, and have the time, you could dye the plastics. My job cost me about $30 and a Saturday for prep/paint then the entire Sunday afternoon installing, but now it looks brand new. Paint holds up well to typical flexing/scratching.
here's my thread:
https://www.thirdgen.org/forums/inte...storation.html
This guy redid his in the factory color with some slightly different materials:
https://www.thirdgen.org/forums/inte...ic-carpet.html
#3
Supreme Member
iTrader: (4)
Re: Interior plastics
Read the second thread thoroughly if you are going to paint your plastics. There are so many good tips in there, I can't understand why it was never stickied. If your panels are in good shape, they can be painted. Just make sure that, if they are faded, they are not rotted. If you can scratch the faded part with your finger nail, throw it in the garbage and look for a different panel. Nice ones are out there. It just takes time and money to get them.
Last edited by 82tarecaro; 02-03-2014 at 05:07 PM.
#4
Junior Member
Thread Starter
Join Date: Jan 2013
Location: Jacksonville,fl
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 camaro
Engine: 5.0
Transmission: 700-r4
Re: Interior plastics
Thanks both interiors came out nice but painting won't work for me as I take my jack russle every where and she sits up on the hump for the gas tank and the side plastics and looks out the window
#6
Junior Member
Join Date: Jul 2011
Location: NEPA
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Camaro Coupe
Engine: currently building a 355
Transmission: unsure what it will end up with
Axle/Gears: 10 Bolt 2.73
Re: Interior plastics
I have a bunch of extra black plastic interior pieces for sale including:
Both kick panels
driver side door sill
both rear arm rests
passenger side quarter panel
rear hatch deck cover
rear hatch motor cover
rear headliner trim
I believe that's everything that I have at the moment. I can send photos if you would like or you can check my listings and see the photos on the Black Plastics thread that I have.
Both kick panels
driver side door sill
both rear arm rests
passenger side quarter panel
rear hatch deck cover
rear hatch motor cover
rear headliner trim
I believe that's everything that I have at the moment. I can send photos if you would like or you can check my listings and see the photos on the Black Plastics thread that I have.
#7
Junior Member
Thread Starter
Join Date: Jan 2013
Location: Jacksonville,fl
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 camaro
Engine: 5.0
Transmission: 700-r4
Re: Interior plastics
No offense I don't buy off of forums only places like eBay or with sites I know or I buy and pickup in person
Trending Topics
#8
Junior Member
Join Date: Jul 2011
Location: NEPA
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Camaro Coupe
Engine: currently building a 355
Transmission: unsure what it will end up with
Axle/Gears: 10 Bolt 2.73
Re: Interior plastics
No offense taken. If you want any of them I can post it through my ebay and then give you the item number and go through them.
Thread
Thread Starter
Forum
Replies
Last Post