Heating system questions
#1
Junior Member
Thread Starter
Join Date: Feb 2014
Location: Twin Falls, ID
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro
Engine: 355 sbc
Transmission: 700r4
Axle/Gears: Moser Rear with 4.11
Heating system questions
My car is missing everything for the heating/AC systems, no dash console or core, pump etc. What would be the cheapest route of creating one? Finding parts, and trying to assemble it, or finding a donor car (maybe even a 4th gen, thinking about a dash swap in the future) and using that system? Any help/ideas are greatly appreciated.
Thanks
Thanks
Last edited by Azshios84; 02-22-2014 at 04:31 AM.
#2
Member
Join Date: Jul 2006
Location: Tickfaw, LA
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 & 88 GTA, 89 Formy, 89 bird
Engine: 3 - 350 TPI, 305 TBI
Transmission: All 700R4's
Axle/Gears: unknown
Re: Heating system questions
If you find one in the wrecking yard or a donor car would be best.
you do have 3 choices:
1. Heat only
2. A/C and Heat
3. Electronic Controlled A/C and Heat
A/C and Heat are going to be the most commonly found.
If 1 4th gen dash swap is going to be incorporated,
I have read both keeping the 3rd gen heater box
as well as going to a 4th gen system.
you do have 3 choices:
1. Heat only
2. A/C and Heat
3. Electronic Controlled A/C and Heat
A/C and Heat are going to be the most commonly found.
If 1 4th gen dash swap is going to be incorporated,
I have read both keeping the 3rd gen heater box
as well as going to a 4th gen system.
#3
Junior Member
Thread Starter
Join Date: Feb 2014
Location: Twin Falls, ID
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro
Engine: 355 sbc
Transmission: 700r4
Axle/Gears: Moser Rear with 4.11
Re: Heating system questions
So if I did a 4th gen dash swap, I would need both systems, or just specific parts? But I could use most of the 4th to get it working, and then some parts from the 3rd?
#4
Supreme Member
iTrader: (35)
Join Date: Aug 2006
Location: Mississauga,Ont,Canada
Posts: 1,470
Likes: 0
Received 1 Like
on
1 Post
Car: 89 IROC
Engine: LSX 6.0 370, TU2 Cam, Fast intake
Transmission: T56 w/ lots of goodies
Axle/Gears: 8.8, Posi, 4.10, 31 Spline
Re: Heating system questions
I think I have all the ducting for a 3rd gen if you need it
#5
Junior Member
Thread Starter
Join Date: Feb 2014
Location: Twin Falls, ID
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 Camaro
Engine: 355 sbc
Transmission: 700r4
Axle/Gears: Moser Rear with 4.11
Re: Heating system questions
6SIX6
Thanks, Ill have to see what I can do. Ill let you know.
Thanks, Ill have to see what I can do. Ill let you know.
Thread
Thread Starter
Forum
Replies
Last Post