LTX and LSX Putting LT1s, LS1s, and their variants into Third Gens is becoming more popular. This board is for those who are doing and have done the swaps so they can discuss all of their technical aspects including repairs, swap info, and performance upgrades.

LS1 vs. LS6 Injectors

Thread Tools
 
Search this Thread
 
Old 10-08-2009, 01:54 PM
  #1  
Moderator

Thread Starter
iTrader: (14)
 
five7kid's Avatar
 
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes on 34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
LS1 vs. LS6 Injectors

I have a 2000 SS LS1/T56 that I'm (slowly) installing in Berlinetta #2. I originally installed an LS6 intake with the stock 2000 injectors and TB.

I've since picked up another "take off" LS6 intake with injectors and TB. I assume it was a crate engine that was upgraded (don't know much more beyond that). Question is what injectors might these be? I haven't looked for identifying #'s on the injectors (the intake and all are in a storage unit right now), but could look for them if that's the only way to know.

I'm assuming they're bigger than the LS1 injectors, and would be preferred. The engine is otherwise stock with Hawks/SSW long tubes, EGR/A.I.R. delete, etc.
Old 10-08-2009, 09:22 PM
  #2  
Supreme Member

iTrader: (4)
 
ghettocruiser's Avatar
 
Join Date: Sep 2002
Location: PA
Posts: 3,685
Received 10 Likes on 9 Posts
Car: 86 Trans AM
Engine: LS1 (not stock...)
Transmission: Built T56
Axle/Gears: Strange 12-bolt w/ 3.73
Re: LS1 vs. LS6 Injectors

I think the injectors can be the same as the LS1 injectors, or they can be the other ones that started in the later years. You gotta check the part number on the injectors to be sure. Here are some part numbers that I had copied a while back. Not sure how valid they still are, but might help you figure out which ones you have.

LS1 fuel injector (98) = 12533952
LS1 fuel injector (99-00) = 12456154
LS1/LS6 fuel injector (01) = 12482704
LS1/LS6 fuel injector (02, at 28#; used in Corvette Z06) = 12561462
LS1/LS6 fuel injector from C5R racecar (42# at LS1/LS6 58psi pressure) =24508208

Obviously you wont have the 98, 99-00 or the C5R injectors. But depending what the intake came out of, who knows. Im gonna guess they are 12482704's.

J.
Old 10-12-2009, 07:40 PM
  #3  
Moderator

Thread Starter
iTrader: (14)
 
five7kid's Avatar
 
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes on 34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
And the winner is. . .

12561462.
Old 10-12-2009, 08:06 PM
  #4  
Moderator

Thread Starter
iTrader: (14)
 
five7kid's Avatar
 
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes on 34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
For the record, the injectors that came with my '00 engine are 12555894.
Old 10-12-2009, 09:47 PM
  #5  
Supreme Member

iTrader: (30)
 
BlueZee28's Avatar
 
Join Date: Sep 2005
Location: O'Fallon, MO
Posts: 6,258
Likes: 0
Received 4 Likes on 4 Posts
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Re: LS1 vs. LS6 Injectors

I'm not sure why the part numbers are different, because aren't the 99+ LS1 and the LS6 injectors both 28lbs anyways? The only ones with 26lbs were '98 LS1's correct?
Old 10-12-2009, 10:10 PM
  #6  
Moderator

Thread Starter
iTrader: (14)
 
five7kid's Avatar
 
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes on 34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
From my searches:

https://www.thirdgen.org/forums/ltx-...w-ratings.html (now a sticky)

"Good job and excellent data. I want to point out that the LS1 Camaros (I have a '99 SS) came with two different flow rates.
"The '98, '01, and '02 LS1 Camaros came with the 28.x lb/hr injectors, while the '99 and '00s came with the 26.x injectors.
"These values are measured at 58psi (4 bars)."


From http://www.ls1tech.com/forums/fuelin...injectors.html (28 lb injectors):

"Actually there are three part numbers:

GMP-12554271 - 97-98
GMP-12561462 - 01-04
GMP-12482704 - 01-04"

Last edited by five7kid; 10-12-2009 at 10:14 PM.
Old 10-13-2009, 07:18 AM
  #7  
Supreme Member

iTrader: (4)
 
ghettocruiser's Avatar
 
Join Date: Sep 2002
Location: PA
Posts: 3,685
Received 10 Likes on 9 Posts
Car: 86 Trans AM
Engine: LS1 (not stock...)
Transmission: Built T56
Axle/Gears: Strange 12-bolt w/ 3.73
Re: LS1 vs. LS6 Injectors

The part numbers are going to change just because newer parts come in, and the numbers get superceeded and what not.

Mid line changes...etc etc.
Old 10-13-2009, 09:30 AM
  #8  
On Probation
 
Atilla the Fun's Avatar
 
Join Date: Oct 2008
Location: Northern Utah
Posts: 6,319
Likes: 0
Received 17 Likes on 17 Posts
Car: seeking '90.5-'92 'bird hardtop
Engine: several
Transmission: none
Axle/Gears: none
Re: LS1 vs. LS6 Injectors

now you can toss one of the 26s in the center console for just in case
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mdenz3
LSX and LTX Parts
3
12-10-2015 11:18 AM
dbrochard
Engine/Drivetrain/Suspension Parts for Sale
6
09-19-2015 08:13 PM
webeeZ28
Tech / General Engine
12
09-14-2015 12:00 PM
earlpote
TPI
9
09-12-2015 11:55 AM
Ranbo108
Tech / General Engine
14
09-09-2015 12:20 PM



Quick Reply: LS1 vs. LS6 Injectors



All times are GMT -5. The time now is 08:40 PM.