knock sensor low input
01-13-2013, 04:02 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2010
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
knock sensor low input
I am getting a low input check engine light for both my knock sensors, The sensors are brand new so im not sure what the problem is, how ever one thing that comes too mind is... If the knock sensors had there wires switched, Front on the rear and the rear on the front... Could it possibly case this?
01-13-2013, 04:13 PM
#2
Supreme Member
iTrader: (24)
Join Date: Jun 2005
Location: NC
Posts: 7,899
Likes: 0
Received 90 Likes
on
54 Posts
Car: 92 Firebird
Engine: Supercharged 6.0
Transmission: T56
Axle/Gears: 8.8 3.73
Re: knock sensor low input
Knock codes can be from a number of issues
Bad new sensors
Water trapped in the recesses
Damaged mini-harness
Wrong sensors
Actual engine knock
etc
Getting them backwards would only reverse the code designation, IE bank 1 to bank 2, if it did anything at all. Besides, the length of the knock sensor mini-harness makes it difficult to reverse the two
Bad new sensors
Water trapped in the recesses
Damaged mini-harness
Wrong sensors
Actual engine knock
etc
Getting them backwards would only reverse the code designation, IE bank 1 to bank 2, if it did anything at all. Besides, the length of the knock sensor mini-harness makes it difficult to reverse the two
Thread
Thread Starter
Forum
Replies
Last Post
Chuck84TA
Engine/Drivetrain/Suspension Parts for Sale
10
07-15-2016 09:05 PM
