Getting Ready to order K member Steering Rack Questions
01-08-2015, 08:02 AM
#1
Junior Member
Thread Starter
Join Date: Sep 2014
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Iroc
Engine: 5.7 350
Transmission: 700r4
Axle/Gears: 3.73
Getting Ready to order K member Steering Rack Questions
I am getting ready to ordering my K Member and have steering rack questions. Since this will not be a drag car just a normal street car with occasional track day / autocross use.
The question is what would be a good steering rack option. Do I just use a factory rack if so are there any modifications that need to be made?
BTW I am ordering a PA racing or UMI performance. I am leaning towards the PA racing since I can use the factory AC.
The question is what would be a good steering rack option. Do I just use a factory rack if so are there any modifications that need to be made?
BTW I am ordering a PA racing or UMI performance. I am leaning towards the PA racing since I can use the factory AC.
01-09-2015, 08:13 AM
#2
Re: Getting Ready to order K member Steering Rack Questions
https://www.thirdgen.org/forums/ltx-...selection.html post #2
You arguably have two rack choices, factory, and pinto. I would recommend the factory rack for your application (street car). No mods needed. Because you wish to retain A/C, I would recommend BMR or PA Racing.
You arguably have two rack choices, factory, and pinto. I would recommend the factory rack for your application (street car). No mods needed. Because you wish to retain A/C, I would recommend BMR or PA Racing.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM