Rogue86

4 bolt main 355 small block chevy
flat top pistons ~9:1 compression
5.7" gm rods re-fitted with ARP rod bolts
GM crank
441 casting heads 1.94/1.50 valves
crane blue racer cam .442/.465 214*/224*@.050
matching crane springs
roller tipped rockers
edlebrock performer intake
edlebrock 600cfm carb
carter fuel pump
mellings m55 oil pump
full new gasket kit all around

Motor makes ~300hp at the crank. Pushes a 3100lb car into the low 13's. It will idle all day long at 1,000 and starts very easily. Would make an excellent street/strip motor and is very easy on parts, only needs to be spun to 5400 rpm, anything more and she'll slow down, makes gobs of low end torque which means fun for the street. Anytime from now on, if anyone wants to hear it run or drive the car let me know. The only reason I'm selling is because I'm moving up to 400+ cubes for next year. Motor has a little over 1500 miles on it, and burns absolutely no oil.

Right now I'm pretty firm at $800. You would be hard pressed to build it from scratch for under $1300.

EDIT: I also have a set of 416 heads less springs with a fresh valve job. 75 bucks

Camaroguy18

I take it you're pretty set on having it be picked up and not shipped?

Rogue86

Yeah, shipping would be a pretty big hassle. How far up north in MN are you? I would be willing to meet you somewhere for a little bit of $.

Thanks for looking!

stiers

iTrader: (1)

Don't let shipping worry you Camaroguy. I drive up from Dubuque to the Twin Cities pretty often. If you pay for gas and he can get the motor to Dubuque I can bring it up.

oh, do you have a build sheet for the motor? Who did the work? If I can't sell my GTA I might as well make it faster.

Camaroguy18

even so, I work at a mail-freight shipping company, and when I was working out a deal with a guy with a zz4 in NC, it was only going to cost 119 dollars to ship to the dock...let me get back to you on this, whether you meet me, or I could meet you stiers, Ill make it worth the while

Rogue86

well if you can get the shipping organized, i can probably figure out someway to crate it up.

Debuque is quite a drive for me, but i might be able to work soemething out.

Sorry, I don't have a build sheet on this motor, I bought it used. I do know it was build by midstate machine in Des Moines. It had been in an s10. I put it in my bracket car, and its just been trailered to the track all summer. (car isn't street legal)

thirdgenbird

if i didnt move out of my moms hous a month and a half ago i would have probobly been over to see it as soon as i could, i just dont think i can swing it anymore...

Rogue86

Bumpity bump.... Actually if anyone wants this motor as of Sunday night, let me know.

Also have:

1 2pc rear main seal stock 350 crank... polished, standard/standard size will handle 500hp easy - 50 bucks

1 set of stock gm rods with arp bolts... will handle 450hp easy -50 bucks

1 set of .060+ stock type pistons for a 350 -30 bucks

bigblockcamaro

Still have the 416 heads? Did you replace with stock valves or oversize?

Rogue86

I've still got the 416 heads, stock valves with fresh valve job, otherwise stock heads.

mv520

so its 800 for the complete motor. it can just be bought and dropped in friends camaro?

Rogue86

Yes, the only thing not included would be like the alternator and starter, otherwise, everything down to the plugs and plug wires will be there. If you want the starter and alternator, i could include them for like 150 more, they're both practically brand new.

Rogue86

Bump!

Video's of the motor running:
http://media.putfile.com/IMG_00023813

http://media.putfile.com/IMG_00019930

http://media.putfile.com/IMG_00035584