Mounting Nitrous bottle
#1
Senior Member
Thread Starter
Join Date: Jun 2001
Location: Saskatchewan
Posts: 920
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Iroc
Engine: 454 Demon 850DP
Transmission: TH350, 3500 stall
Axle/Gears: 3.73
Mounting Nitrous bottle
I am looking at mounting my nitrous bottle in the spare tire well. Will this pass tech inspection?
#2
Moderator
Join Date: Jul 1999
Location: 51°N 114°W, 3500'
Posts: 17,120
Likes: 0
Received 123 Likes
on
104 Posts
Car: 87 IROC L98
Engine: 588 Alcohol BBC
Transmission: Powerglide
Axle/Gears: Ford 9"/31 spline spool/4.86
It needs to be isolated from the driver's compartment by a firewall. Since a third gen is considered a "hatchback" and there is no rear firewall or trunk area, plastic compartments don't pass, you'll need to install an external vent to pass a tech inspection. The vent is designed to vent the NOS to the outside of the vehicle if the pressure relief ever blows.
Other than that it just needs to be properly installed with the proper mounting brackets.
Other than that it just needs to be properly installed with the proper mounting brackets.
#3
Supreme Member
Join Date: Jun 2001
Location: Charleston, SC
Posts: 9,550
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Camaro Vert
Engine: 02 LS1, HX40
Transmission: 2002 LS1 M6
also, when you mount it thru the wheel well, use a backing plate...
in otherwords, have the bolts go thru the bracket, thru the wheel well, and thru another piece of metal that is large enough to spread out the weight.....
in otherwords, have the bolts go thru the bracket, thru the wheel well, and thru another piece of metal that is large enough to spread out the weight.....
#4
Supreme Member
iTrader: (1)
Join Date: Mar 2003
Location: north plainfield, nj
Posts: 2,177
Likes: 0
Received 0 Likes
on
0 Posts
Car: 05' GTO
Engine: 6.0L
Transmission: A4
Hey if u mount the N.O.S. bottle over the hump in the back seat and put the blow off tube on there and run it out a hole there would that pass for tech? i know ive seen other cars run and theyve had them mounted in front of the passenger side seat and have the blow off tubes installed.
#6
Senior Member
Thread Starter
Join Date: Jun 2001
Location: Saskatchewan
Posts: 920
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Iroc
Engine: 454 Demon 850DP
Transmission: TH350, 3500 stall
Axle/Gears: 3.73
I called the head of tech inspection at my local track. He said there is no problem mounting it in the spare tire well as long as the blow off tube is directed through a hole to the outside of the passenger compartment.
#7
Supreme Member
Join Date: Apr 2000
Location: Stillwater, OK
Posts: 1,154
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Formula
Engine: 355 DFI Superram w/ R-Trim
Transmission: Probuilt 700r4
My bottle is on the driveshaft tunnel between the rear seats. I have a blow down tube running to a bulkhead on the floor. Everything passes tech just fine. You can even run your supply line inside the car.
Thread
Thread Starter
Forum
Replies
Last Post
IROCZDAVE (88-L98)
Engine/Drivetrain/Suspension Parts for Sale
0
09-02-2015 08:49 AM