UPDATE 6/3/2005: I'm starting my across-town move. I'm going to be offline completely this weekend; after that I'll only be on sporadically until Friday. I will NOT be able to read my email after about 9am on June 4th. I will be able to respond to posts and private messages when I get time. If you have paid for stuff and have not received it yet, I apologize, but I've had a sinus infection in addition to trying to move. I am doing the best I can to get things out under the circumstances. I should be able to read my email by 6pm Friday, June 10th. Hopefully normal response time to PMs and posts will resume at that point. Most things on this list don't have a price listed because they're not worth a heck of a lot. If you see something you want, PM or Email me an offer--no reasonable offer refused. Pictures of any part are available upon request. Parts are organized by what car they came off of (if I know), miscellaneous parts are at the end. Parts with prices next to them are all "or best offer". Again, no reasonable offer refused, I want to get this junk out of my attic. Shipping is available (you pay) on most of the medium to small parts, larger parts are pickup or make arrangements to retrieve. I have had a lot of people ask if I take paypal. The answer is yes, I do. You can pay with paypal OR send me a money order. Obviously I'll ship it out sooner if you pay via paypal. 91Z Parts (medium quasar blue exterior, light gray interior): Body/Exterior: <s>* set of IROC/Z28 grid taillights, good condition ($50)</s> SOLD <s>* set of power mirrors, known working ($65)</s> SOLD * Complete set (3 pcs) of triangular k-member braces, slightly rusty * set of front turn signals, lenses are fogged, otherwise good cond * fuel neck area black plastic insert * Fuel door * Set of glass t-tops * Hood minus blisters -- SALE PENDING Interior: <s>* Driver's side front seat</s> SOLD * Tilt steering column (parts only)--missing steering wheel, lock plate, hazard flasher, turn signal lever, has NEW Vats cylinder (will sell VATS cyl separately). Inludes the lock plate and several other internal parts as well as a VATS cylinder I have no key for. * Center console has radio trim plate minus shift plate, lt gray carpet, slightly cracked by heat vent (repairable with epoxy), no trunk release switch (but has hole for it), has center console cover, window switches mismatched * Set of 3 seats, Passenger's side front seat manual track, decent shape, need cleaning, split rear bench * Plate w/pivot for rear split bench * most of the lt gray interior plastics, some pieces better condition than others, email/PM with requests * dome light housing * lt gray door panels, a little water damage to one corner of the cardboard * Two front factory 4x6 speakers #16033662, excellent condition Powertrain/Underhood: <s>* Set of TPI rubber fuel lines (marked 3/8 GM 6163-M 061890-KV-BR)</s> SOLD <s>* Set of TPI metal lines for serpentine equipped car</s> SOLD <s>* TPI thermostat housing</s> SOLD <s>* steering box w/ pitman arm, this is a WS6 2.25 turns lock-to-lock box</s> SOLD <s>* set of VATS modules, PN 16135270 (x2): no idea what resistance they are keyed to</s> SOLD <s>* Set of rear wheel drum "spacers"--dunno what these are used for</s> SOLD * Set of serpentine brackets and accessories: includes both main brackets, idler, water pump and pulley (condition on water pump is unknown), crank pulley, belt marked945K6 (not sure if this is with or without air pump), known good PS pump, pulley, and some hose, and an alternator that is electrically dead but has good bearings. I don't seem to have any of the black metal tubular braces. ($110) * Adjustable fan switch marked rainbow electronics LTD 0C-120C 9912 Maytech * 100 PSI fuel pressure testing gauge * wiper motor complete * EGR valve * brake booster / master cyl / prop valve assm * three factory TPI/MPFI V6 air intakes * Horn * Charcoal canister w/solenoid (x2) * SIRS computer (Air Bag) GM Serv. No 1228874, AI1221, with mounting brackets/posts (x2). One is also labeled K202691131 and the other is labeled K102490734. * Known good A/C compressor and AC/compressor head pipes for serpentine system * Known good AIR pump and pulley for serpentine system * 45 tooth driven gear for 700R4 for use with VSS equipped cars 92RS Parts: <s>* small cap external coil distributor</s> SOLD * TBI ECM from 92 RS (01228746) * MSD BlasterCoil P/N 8226 * set of TBI rubber fuel lines * TBI 305 knock module marked ANB(?)Z 886761 * TBI CTS * 3 AIR check valves * complete TBI unit * set of rear black shoulder belts, shoulder belt housings, and rear seat side panels, excellent condition * Set of glass t-tops * Two AIR divert valves with covers and the metal pipe that goes to the AIR pump. Only one has the external filter * A complete set of almost new AIR injection manifolds that bolt to the exhaust manifolds. No check valves * Single electric fan and motor 84 Sport Coupe Parts (black exterior, blue interior): <s>* Shift improvement parts for 700R4 from ZZ4 conversion kit: includes valve pkg #8634940, spring #8639164, housing #8673039, and piston asm #8642079 ($50)</s> SOLD * 82-89 cig lighter / defrost plate * Set of black, flat ugly no power no cable mirrors * Set of blue seatbelts minus DS retractor * complete blue interior plastics, some pieces are in better shape than others, email/PM with requests * Vacuum controlled charcoal canister * Instrument panel bezel, good cond * Brand new clutch pedal pad * Brand new brake pedal pad for manual trans car (x2) * Factory torque arm with black polyurethane bushing * Factory boxed (bolt in reinforcement) 1LE rear control arms (P/N 10164151) * Set of factory seat recliners, one new, one used * Set of factory NON POWER seat rails * Five speed shift plate, plate is in good condition, boot is in fair to good condition. Comes with added red LED (use for whatever), ashtray lid, and ashtray. * Set of V8 A/C hoses that bolt to the A/C compressor * Complete set of NEW rod and main bearings for 305 engine * 39 and 35 tooth driven gears for use with 700R4 and cable driven speedometers * Complete distributor for use with computer controlled cars / cap in coil design. Cap is broken (crappy one I put on to protect the distributor) everything else is good. Has a melonized chevy gear for use with ROLLER CAMSHAFT Misc parts: <s>* Set of global west subframe connectors for 82-92 F-body ($125)</s> SOLD <s>* SLP "Y-pipe" for 1 3/4 SLP headers for a dual cat car (technically they are just extension pipes)</s> SOLD <s>* PA racing coil over tubular k-member setup for STOCK MOTOR MOUNTS and coil overs. Includes A-arms, coil over kit, and crossmember</s> SOLD <s>* Complete UNOPENED, NEVER USED Hooker Aerochamber catback exhaust for 82-92 F-body, P/N 16822, should be for a dual cat car</s> SOLD <s>* One 4-channel 100W/channel Jensen amp (model A432HLX)--used to power subwoofers in bridged mode (250W per channel x 2), has integral high and low pass filters</s> SOLD <s>* One Kenwood 12-disc CD changer (model #KDC-C504) designed for a head unit with changer controls, comes with cable and mounting brackets</s> SOLD <s>* Kenwood 9+2 band equalizer (model #KGC-6042A) with separate subwoofer controls and adjustable gain/low pass filter for the sub</s> SOLD * 1225450 ECM (not sure what this fits, might not even be a thirdgen ECM) * Brand new still in bag drum cylinder (Adv Auto P/N W37423 SKU 3640191) * 4bbl holley carb, only id'ing marks are L7454 2921 on the fuel inlet... * Haynes holley carb manual * Plastic gauge lenses for 82-89 Camaro with trip odometer reset at 6 o'clock on the speedometer (x3) * Plastic gauge lenses for 82-89 Camaro with trip odometer reset at 10 o'clock on the speedometer * Black metal bezel from gauge cluster for 82-89 camaro (x3): The back of one is the factory light blue color, one is red, and the other is green * Parts cluster from unknown year of 82-89 camaro: has a broken double needle 85mph speedometer, an earlier style fuel gauge with a plain needle, and a 5000rpm redline tach/60 psi oil gauge, voltage gauge, and temp gauge with the "stepped" needle design * Complete factory dual cat asm--also has a flowmaster "Y" collector after the cats * Two Jensen 100Wx2 channel MOSFET amplifiers, one blue (model # A222HX) and one black (A220, older model). The black one has some rust on the bottom and I'm not willing to guarantee that it works--I'd prefer to throw it in for free with the blue one * Two Kicker free-air subs (model #F12A) mounted to plywood in order to put across the rear cargo well. There's also a blank panel that fits in between the two to completely cover the well and seal it off. I had a wooden framework build underneath to support the CD changer and amp (below) * Kenwood casette head unit (model #KRC-702) mounted in a bracket to fit thirdgen Camaro center console. * Set of chrome Chevrolet perimiter bolt valve covers with breather / PCV fittings and NEW valve cover gaskets * Comp Cams XE 262H-10 (12-238-2) cam (never used or even removed from the plastic), factory style timing chain, and intake gaskets

how much for the tubular k-member and coil over kit? is it new or used and if used for how long?

how much are the sub frame connectors?

New, never used. I have pics of them here .

I'd like to get about $500 for the whole setup.

I was looking for $125, but I'm open to offers. I have pics of them in the same place as the k-member. They've never been installed.

Would you ship the hooker cat back?? If so whats the price??

z28redline

I sure would. It's all still boxed up so it's no problem to ship. How much they charge me is another matter entirely. I was looking for $125 for it.

Brand new it's $215.95 from summit, plus $13.95 shipping (at least in the US). Might be worth it for you to check how much it'll cost to have it shipped to you new.

I am interested in the dual cats and maybe y pipe can you send pics to ml258@yahoo.com thanks

I need a drivers side pillar cover...black. Previous owner mounted some gauges to the pillar and cut it up. I also need a headlight knob. I have a 92RS...Thanks Steve

DS A-pillar cover I have in black (pretty sure they were all black). Headlight switch I think I have one, but it's down in VA and I can't get it for you until next weekend. Make an offer on 'em and I'll see what I can do.

Sounds good on the cat back. I sent you a pm

z28redline

Price and pic on the rainbow fan control???

Fan control pics:

One

Two

There's already one possible sale pending on it--if that falls through, I'll take $5 + S&H.

Would you sell the air diverter valve and all hoses and ac hoses for a serp setup? I just converted to serp and still need those.

The air diverter valve & hoses, sure. I think I have another set of those somewhere. The A/C hoses you are out of luck on though.

Do you need the air pump or just the divert valve + hoses?

Just the valve and hoses, I have the pump. Basically anything i would need that has to do with the smog system for a serp setup, the ac is in the way for the v-belt diverter valve.

how much for the tpi rubber fuel lines and thermostat housing. thanks,ryan

I can do that for ya. The check valves should all be the same, so that means the divert valve, the metal pipe that goes from the AIR pump to the divert valve, and the rubber hoses.

How's $15 + S&H for all that sound?

How's $25 + S&H for both? ($20 for the lines and $5 for the housing)

How much for the fuel pressure tester and the drum spacers. shipping to watertown NY 13601

ok how much would shipping be to 08005 barnegat nj and do you have a pic of the t sat housing thanks,ryan

$10 for the gauge and $5 for the spacers. UPS is being retarded and doesn't want to give me a ground shipping quote. USPS says anywhere from $8-$10 depending on actual weight.

If you're interested I can box those up and get an actual shipping price on monday.

Edit: Finally got UPS's site to behave. Shipping is $9.50

Pic of the housing

Shipping is $8.50.

awesome ill take them i have a thermostat housing but the one bolt hole is elongate almost throught the edge of the housing. do you take money order if so addy please

Sent you a PM...

Set of global west subframe connectors for 82-92 F-body


these are weld in, or bolt on?

have you still got the subframes and k-member? if so give me some info and a price.

sounds good 99hawk, ohhhh! I also need the metal fuel lines that go from the rubber lines to the the fuel rail for the serp system.

I am interested in the following items:

* set of IROC/Z28 grid taillights, good condition ($50)
* set of power mirrors, known working
* fuel neck area black plastic insert
* Brand new clutch pedal pad
* Brand new brake pedal pad for manual trans car

Is there any damage to the taillights? Can I polish them out to look like new?
Condition of the mirrors?
Please pm me pics of these items.

I need the taillights
the cig lighter
then the front set of 4x6

email me at boosted_maxima@yahoo.com

That is if I don't buy them.

Lotta questions, I'm going to try and address them all at once...

Weld - in.

Subframes--I am looking for $125. There's one person ahead of you that's shown some serious interest, if that falls through I believe you're next in line.

K-member-- I was looking for $500 for the whole setup. The k-member doesn't work with factory springs and requires a coil over conversion but the coil overs and a-arms don't require the k-member. I won't separate as long as I still have the k-member but if someone wants JUST the k-member we can work a deal out.

Pics of both are in this directory on my webserver.

I have those--I have to ask 84camz28 if he's expecting those with the rubber lines. I don't THINK so. Let me PM him and get back to you.

I'll send you a PM in a few minutes!

I'll send you an email in a few minutes, but drain89 has dibs on the taillights if he wants them.

Ok 99hawk, if you got them <Diverter valve/hoses and metal fuel lines for serp.>just let me know how much to send you and where too, email is pww@pwwroten.com

pwwroten you can have those metal lines i only need the rubber ones

99hawk120 i sent you a pm...i need it asap and need shipping charges. thanks.

Regarding the 84 Sport Coupe:

I'm looking to get a complete black passenger side door with manual or non-adjustable mirror, manual lock and power window. No rust and good paint. Am I in luck?

What condition are the t-tops in ? How much?

No--the doors on the 84 SC were originally manual everything, and they rusted out at the bottom, plus the lock cylinder on the passenger's side was screwed up. I pulled the mirrors off the dorrs and pitched the doors in the local junkyard.

They're in good to fair condition. I can take some pics of them if you'd like. I'm not sure I'd want to ship them though since they are glass, I don't trust UPS not to break them. If you wanted to pay for insured shipping I'd see what I could do.

I was only looking for about $75 for the set.

just my 2 cents...i sent t-tops UPS from PA to IL it cost me about $20 and they arrived 3 days later untouched

money order is bieng sent tomorrow thanks

email sent... on coilovers and kmember setup

ATTENTION! I will NOT be able to answer any E-MAIL sent to me after approximately midnight April 25th until Friday, April 29th. I will continue to respond to PMs and posts on this thread as normal. If you have sent an EMAIL that you have not heard back from me yet, RESEND as a PM.

CamarosRUS, I believe I did get your email that you sent yesterday. I forwarded it to my work account and will be responding shortly.

Everyone else, PLEASE USE POSTS or SEND A PM. Thank you!

If the y-pipe and dual cats r still available ? pics price ?

They are, however they are at my parent's place in VA. I am heading down there this weekend to bring them back up, so I will have pics probably Sunday or Monday. There's one person in front of you who is also waiting for pictures.

Do you still have the steering box w/ pitman arm? Is that the 2.25 ratio and how much? Thanks.

Gilley

I still have it for now, I don't know what ratio it is. I am going to check it on Friday.

Thanks. Mine kind of decided that it was destined to leave this world and die on me.

Gilley

Do you still have the TB from the 92 RS? How complete is it and how much?

I do. As far as I know it's complete. I will try and take some pictures of it for you tonight.