getting out of racing sale... damn school bills
#1
Member
Thread Starter
Join Date: Feb 2003
Location: Elizabeth NJ
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
getting out of racing sale... damn school bills
well i have been forced to sell my cars as well as all my stash of parts i was collecting for them...
My firebird is for sale im the cars for sale section. and my parts list as is follows::::
1. Turbo exhaust piping. fits the turbo on the passanger side where the battery/windshield washer tank goes... it is 2 1/2 in piping all the factory accessories fit with this kit..... i paid 650 for this kit to be made... i know i will not get close to that. but no less then half...
2. Trickflow cylinder heads 2.02 intake 1.60 exhaust valves: new valves(fararie) new valve job (3 way) 64cc combustion chamber fresh deck job only .002 taking off. i have over $1000 sunk into these heads... im looking for somewhere around $700 obo... (((((these heads were on my father vette. he ran mid 12s all motor (mild setup)))))) The heads were miticuliously inspected by B&B machine shop in rahway (very reputible)
3. NOS cheater nitrous kit, includes: Fuel and Nitrous solenoids, carb plate (4 barrel), lines from the solenoids to the carb plate, 10lb bottle empty(optional), there are some misc parts too: switches, fuel filter, bottle brackets, wires.... etc... i paid over 400... make me an offer The summit racing part number is NOS-02001NOS
My firebird is for sale im the cars for sale section. and my parts list as is follows::::
1. Turbo exhaust piping. fits the turbo on the passanger side where the battery/windshield washer tank goes... it is 2 1/2 in piping all the factory accessories fit with this kit..... i paid 650 for this kit to be made... i know i will not get close to that. but no less then half...
2. Trickflow cylinder heads 2.02 intake 1.60 exhaust valves: new valves(fararie) new valve job (3 way) 64cc combustion chamber fresh deck job only .002 taking off. i have over $1000 sunk into these heads... im looking for somewhere around $700 obo... (((((these heads were on my father vette. he ran mid 12s all motor (mild setup)))))) The heads were miticuliously inspected by B&B machine shop in rahway (very reputible)
3. NOS cheater nitrous kit, includes: Fuel and Nitrous solenoids, carb plate (4 barrel), lines from the solenoids to the carb plate, 10lb bottle empty(optional), there are some misc parts too: switches, fuel filter, bottle brackets, wires.... etc... i paid over 400... make me an offer The summit racing part number is NOS-02001NOS
Last edited by matts90firebird; 10-17-2005 at 08:21 PM.
#2
Junior Member
Join Date: May 2005
Location: Ohio
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Car: Caprice wagon
Engine: 5.7TBI
Transmission: 700R4
2. Trickflow cylinder heads 2.02 intake 1.60 exhaust valves: new valves(fararie) new valve job (3 way) 64cc combustion chamber fresh deck job only .002 taking off. i have over $1000 sunk into these heads... im looking for somewhere around $700 obo... (((((these heads were on my father vette. he ran mid 12s all motor (mild setup)))))) The heads were miticuliously inspected by B&B machine shop in rahway (very reputible)
Will those fit a 350TBI motor?Thanks.
DJ
Will those fit a 350TBI motor?Thanks.
DJ
#3
Member
iTrader: (6)
Join Date: Jul 2004
Location: RogueValley, Oregon
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84Z & Porsche
Engine: 427sbc - 471 - 850 Demon Claw
Transmission: Bowtie stage II TH700R4 - 10" 3000
Axle/Gears: 9 Bolt w/ 3:45's
Are these the Kenny dutwiller specials - Was wondering on the intake runner CC size. thanks, Ed.
Last edited by cocacolakidd; 10-09-2005 at 06:08 PM.
#5
Member
iTrader: (1)
Join Date: Feb 2004
Location: Edison NJ
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 formula and 85 olds delta 88 2 d
Engine: 60's 350 holley carb and intake
Transmission: muncie 4 speed with centerforce
Axle/Gears: 3.42 99 camaro rear w/ discs
hey im in edison nj...wondering about the nos....i have 87 formula with 350 4bbl. edelbrock intake and carb...what are ya asking?
#6
Member
iTrader: (6)
Join Date: Jul 2004
Location: RogueValley, Oregon
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84Z & Porsche
Engine: 427sbc - 471 - 850 Demon Claw
Transmission: Bowtie stage II TH700R4 - 10" 3000
Axle/Gears: 9 Bolt w/ 3:45's
Trick Flow heads were also signed by Kenny Dutwiller and the heads went up from 190CC intake runners to 195CC intake runners - Was wondering if they were the Dutwiller specials? Thanks, Ed.
#7
Member
Thread Starter
Join Date: Feb 2003
Location: Elizabeth NJ
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
im not sure about the kenny dutwiller or not... ill find out this week and let you guys know...
i believe the intake runner is 195cc or at least that is what b&b told me... i actually think i have the original box... ill see about part numbers too
as for the NOS i would like to get 375... that is over 100 less then what i paid for it... and its in good condition.....
i believe the intake runner is 195cc or at least that is what b&b told me... i actually think i have the original box... ill see about part numbers too
as for the NOS i would like to get 375... that is over 100 less then what i paid for it... and its in good condition.....
Trending Topics
#10
Junior Member
Join Date: May 2005
Location: Ohio
Posts: 71
Likes: 0
Received 0 Likes
on
0 Posts
Car: Caprice wagon
Engine: 5.7TBI
Transmission: 700R4
I'm still interested in them if they will work on a TBI. Do you by any chance have a part number for these so I can look them up???Thanks .
DJ
DJ
#12
Member
Thread Starter
Join Date: Feb 2003
Location: Elizabeth NJ
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
ive got some pics of the heads and other stuff
the part number for the heads is 6090... i actually have the original box they came in
they are not dittwiller heads
they are 64cc
the part number for the heads is 6090... i actually have the original box they came in
they are not dittwiller heads
they are 64cc
#14
Member
Join Date: Jan 2004
Location: Chagrin Falls, Ohio
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
Hey matt
Is the nitrous system used?
Very interested.
you have a PM
Any pics of the turbo setup and/or nitrous setup
Is the nitrous system used?
Very interested.
you have a PM
Any pics of the turbo setup and/or nitrous setup
Last edited by nightrider87; 10-17-2005 at 10:55 PM.
#15
hey you head guys,before you run off looking for kenny d trick flows call trick flow and speak witht hem,i talked with a rep there and he said theres no difference between their old 23 degree head and the kenny d heads,they just paid kenny d to put his nam eon it.sales gimmick(dont confue the 23 head witht he old twisted wedge)fyi
#22
Member
Thread Starter
Join Date: Feb 2003
Location: Elizabeth NJ
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
why yes i do i took q tun of pics.... alot of valve seat shots to show how new it is... the sharpy marker from the machine shop are still on there... the only thing is that i forgot to take pics of the valves.... tney are farrie valves... im perfect condition...
#25
Member
Thread Starter
Join Date: Feb 2003
Location: Elizabeth NJ
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
I ALSO HAVE 4.10 GEARS BRAND NEW... FOR 135+SHIPPING
AND JE DISH TOP PISTONS BRAND SPANKING NEW... NEVER INSTALLED BEST OFFER... BRAND NEW FROM A STORE THEY COST ABOUT 5-6 HUNDRED.... JUST MAKE A DECENT OFFER.......
AND THE HONEY COMB REAR TAIL LIGHTS IN PRITTY NICE CONDITION... NOT PERFECT BEST OFFER
AND JE DISH TOP PISTONS BRAND SPANKING NEW... NEVER INSTALLED BEST OFFER... BRAND NEW FROM A STORE THEY COST ABOUT 5-6 HUNDRED.... JUST MAKE A DECENT OFFER.......
AND THE HONEY COMB REAR TAIL LIGHTS IN PRITTY NICE CONDITION... NOT PERFECT BEST OFFER
#29
Senior Member
Join Date: Nov 2000
Location: Queen Creek, AZ
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula
Engine: 383 HSR
Transmission: 5th 700R4
Axle/Gears: 3.89
what is included with the turbo piping? and what headers/manifolds are used what is the turbo flange? also wondering what CR the pistons are supposed to be?
#30
Member
Thread Starter
Join Date: Feb 2003
Location: Elizabeth NJ
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
the gears are us gear gears... they are for 3rd gen 10 bolt 7.5 inch carrier.....
the turbo kit includes corvette manifolds (reversed and flipped up side down) and the 2 1/2inch cross over pipe, the flange is for larger style t60 t70 turbos with 4 bolt holes ... i have a front
mounted intercooler. ( no pic yet)
for the pistons they are JE 9:1 (supercharger, turbo, giggle juice)
they do not have the locks but they can be gotten from je for very cheep...
the turbo kit includes corvette manifolds (reversed and flipped up side down) and the 2 1/2inch cross over pipe, the flange is for larger style t60 t70 turbos with 4 bolt holes ... i have a front
mounted intercooler. ( no pic yet)
for the pistons they are JE 9:1 (supercharger, turbo, giggle juice)
they do not have the locks but they can be gotten from je for very cheep...
#31
Senior Member
Join Date: Nov 2000
Location: Queen Creek, AZ
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula
Engine: 383 HSR
Transmission: 5th 700R4
Axle/Gears: 3.89
sorry to be such a pain but do you have a part # for the pistons and is there a down pipe included wiht the piping? I'm intrested in both items just trying to determine if the pistons are what I need.
#32
Member
Thread Starter
Join Date: Feb 2003
Location: Elizabeth NJ
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
the pistons are at me girls house in pa..... i dont have the part numbers on me...but i might have them later... the only number for them are cast into the bottom of the piston
#35
Supreme Member
iTrader: (2)
Join Date: Jul 2003
Location: Dallas, TX area
Posts: 3,205
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Formula WS6 (Black, T-Tops)
Engine: 383 MiniRam (529 HP, 519 TQ - DD2K)
Transmission: Built '97 T56, Pro 5.0, CF-DF
Axle/Gears: 4.11 posi Ford 9"
FWIW - the part number isn't valid any longer at TF, so I can't look up any particulars on these heads.
What size are the rocker studs on these heads? Have they had any porting done to them? Also, the heads were originally "complete", so what rockers, springs, etc. came with them, and are those included?
What size are the rocker studs on these heads? Have they had any porting done to them? Also, the heads were originally "complete", so what rockers, springs, etc. came with them, and are those included?
#36
Member
Thread Starter
Join Date: Feb 2003
Location: Elizabeth NJ
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
i have one more thing i just came across in my stash... its an autometer 200mph speedo 5"
its brand new still in the original box covered in the plastic still
let me know
its brand new still in the original box covered in the plastic still
let me know
#40
Junior Member
Join Date: May 2005
Location: Manassas VA
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 IROCZ
Engine: 350
Transmission: 700r4
very interested in the 4.10s email me about payment information and shipping price to manassas, va. gregory.garrison@comcast.net
thanks
thanks
#41
Senior Member
Join Date: Nov 2004
Location: garland,tx
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 gta
Engine: 5.7
Transmission: turbo 350
the part number he shows is for an edelbrock head. quite evident by the "performer" lettering and that it says straight plug on the box, but the head has angle plugs. i do not believe these heads have a 64 cc chamber either, they look to be closer to a mid 50 cc. im guessing he has the trick flow heads in an edelbrock performer box. he should maybe try to get to part number off the head.
#43
Member
Thread Starter
Join Date: Feb 2003
Location: Elizabeth NJ
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
the gears are still available... i cant seem to find any part numbers on the heads other then these pics.... the first is one inside where the springs are and the other seams to be a serial number
Last edited by matts90firebird; 11-01-2005 at 07:29 PM.
#48
Supreme Member
iTrader: (33)
Join Date: Jul 2000
Location: Boosted Land
Posts: 5,945
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Z28
Engine: Boosted LSX
Originally posted by matts90firebird
i still have the turbo but i have a really good offer on them im awaiting payment.. if something happens i will re list
i still have the turbo but i have a really good offer on them im awaiting payment.. if something happens i will re list
^^^
ship it to me yet? Give me a call PH# on site cecoatings . com
Thread
Thread Starter
Forum
Replies
Last Post