BBK 58mm throttlebody and 52mm modified stock throttlebody
12-19-2005, 08:00 PM
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 1999
Location: Elkton MD, USA
Posts: 858
Likes: 0
Received 5 Likes
on
3 Posts
Car: 1985 Camaro Z28, VIN F
Engine: 427 sbc, HSR
Transmission: T-56, self rebuilt 700+ hp
Axle/Gears: Moser 12bolt, 3.42 trutrac
BBK 58mm throttlebody and 52mm modified stock throttlebody
Used BBK Twin 58mm TPI Throttlebody, with 1985 thru 1988(?)
throttle linkage. (not the "cam" type linkage)
http://store.summitracing.com/defaul...5&autoview=sku
$200 + S/H
Used Stock Twin 52mm TPI Throttlebody, with 1985 thru 1988(?)
throttle linkage. (not the "cam" type linkage)
(Stock TB is 48mm, this one has been bored and redone
with 52mm blades)
SOLD !
Both Throttlebodies are "bare" in that they come with
no sensors, no IAC adaptors, and no top name plates.
Located in Elkton, MD 21921
throttle linkage. (not the "cam" type linkage)
http://store.summitracing.com/defaul...5&autoview=sku
$200 + S/H
Used Stock Twin 52mm TPI Throttlebody, with 1985 thru 1988(?)
throttle linkage. (not the "cam" type linkage)
(Stock TB is 48mm, this one has been bored and redone
with 52mm blades)
SOLD !
Both Throttlebodies are "bare" in that they come with
no sensors, no IAC adaptors, and no top name plates.
Located in Elkton, MD 21921
Last edited by 85MikeTPI; 12-22-2005 at 12:55 PM.
12-19-2005, 08:22 PM
#3
Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 1999
Location: Elkton MD, USA
Posts: 858
Likes: 0
Received 5 Likes
on
3 Posts
Car: 1985 Camaro Z28, VIN F
Engine: 427 sbc, HSR
Transmission: T-56, self rebuilt 700+ hp
Axle/Gears: Moser 12bolt, 3.42 trutrac
Originally posted by H0TR0Dn
Can you send me a pic of the redone stock 1 and who redid it?
Thanks
Can you send me a pic of the redone stock 1 and who redid it?
Thanks
12-22-2005, 12:56 PM
#4
Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 1999
Location: Elkton MD, USA
Posts: 858
Likes: 0
Received 5 Likes
on
3 Posts
Car: 1985 Camaro Z28, VIN F
Engine: 427 sbc, HSR
Transmission: T-56, self rebuilt 700+ hp
Axle/Gears: Moser 12bolt, 3.42 trutrac
58mm BBK TB still for sale
52mm TB sold, 58mm still for sale.. Orig post updated.
05-06-2006, 09:17 AM
#5
Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 1999
Location: Elkton MD, USA
Posts: 858
Likes: 0
Received 5 Likes
on
3 Posts
Car: 1985 Camaro Z28, VIN F
Engine: 427 sbc, HSR
Transmission: T-56, self rebuilt 700+ hp
Axle/Gears: Moser 12bolt, 3.42 trutrac
I finally got around to installing my monoblade throttlebody
so the BBK 58mm TB is still available. Make offer
so the BBK 58mm TB is still available. Make offer
05-06-2006, 10:25 AM
#6
Member
Join Date: Jan 2005
Location: Eastern Georgia
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Iroc-Z
Engine: 305 TPI (used to be Carb)
Transmission: 700R4
Interested in the 58mm, just awaiting a quick PM from a buddy to make sure it would work on my set-up. How long did you use it for? and how about $175 shipped to Georgia.
Tony
Tony
05-06-2006, 01:42 PM
#7
Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 1999
Location: Elkton MD, USA
Posts: 858
Likes: 0
Received 5 Likes
on
3 Posts
Car: 1985 Camaro Z28, VIN F
Engine: 427 sbc, HSR
Transmission: T-56, self rebuilt 700+ hp
Axle/Gears: Moser 12bolt, 3.42 trutrac
Originally Posted by My1986IROC-Z
Interested in the 58mm, just awaiting a quick PM from a buddy to make sure it would work on my set-up. How long did you use it for? and how about $175 shipped to Georgia.
Tony
Tony
surcharges would apply if payment through PP.
thanks
mike
Trending Topics
05-08-2006, 08:36 AM
#8
Junior Member
Join Date: Apr 2004
Location: Dallastown, pa
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Irocz
Engine: 355 Stealthram
Transmission: 5speed
Axle/Gears: Stock 10bolt 3.73 posi
Hey Mike, is there any play in the throttle shaft on the 58mm? I will be installing on my 87 Iroc with a stealth ram so there shouldnt be a problem, do you have any Pic of it? I live in Dallastown Pa so i could pick up since your not far away, will you take 175 if i pick up, let me know if you have any Pic and if so you can email them to me at leathalirocz@yahoo.com Thanks Chad.
05-08-2006, 09:01 AM
#9
Senior Member
Thread Starter
iTrader: (2)
Join Date: Aug 1999
Location: Elkton MD, USA
Posts: 858
Likes: 0
Received 5 Likes
on
3 Posts
Car: 1985 Camaro Z28, VIN F
Engine: 427 sbc, HSR
Transmission: T-56, self rebuilt 700+ hp
Axle/Gears: Moser 12bolt, 3.42 trutrac
Originally Posted by leathalirocz
Hey Mike, is there any play in the throttle shaft on the 58mm? I will be installing on my 87 Iroc with a stealth ram so there shouldnt be a problem, do you have any Pic of it? I live in Dallastown Pa so i could pick up since your not far away, will you take 175 if i pick up, let me know if you have any Pic and if so you can email them to me at leathalirocz@yahoo.com Thanks Chad.
DCP_3150
DCP_3151
DCP_3148
No play that I'm aware of.
If you'd like to send a $25 deposit via Paypal to hold it, that would be fine.
mike
05-08-2006, 01:50 PM
#10
Junior Member
Join Date: Apr 2004
Location: Dallastown, pa
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Irocz
Engine: 355 Stealthram
Transmission: 5speed
Axle/Gears: Stock 10bolt 3.73 posi
I'll tell ya what, id just as soon if its ok with you, send the whole amount via Paypal for $185.00 dollars if you wouldnt mind shipping it to me. With the price of gas it would wash out anyhow running down there, as long as its in good working order ill take it. What did you drop that 427 in anyhow, looks pretty tough! I will need your email address to send the money to you, mine is posted upline so hope to hear from ya, Thanks again Chad.
Thread
Thread Starter
Forum
Replies
Last Post
Genopsyde
Engine/Drivetrain/Suspension Parts for Sale
3
10-07-2015 08:35 PM
Navy8125
Engine/Drivetrain/Suspension Parts for Sale
10
08-22-2015 07:13 PM