oil pan modifications ideas? (for road racing)
#1
Supreme Member
Thread Starter
iTrader: (18)
Join Date: Dec 2007
Location: Minnesota
Posts: 1,924
Likes: 0
Received 12 Likes
on
9 Posts
Car: 84 camaro, 88 trans am, 98 camaro
Engine: Modded , stock, LSX modded
Transmission: 700r4, 700r4, t-56
Axle/Gears: 327, 308, 373
oil pan modifications ideas? (for road racing)
Iv looked at many after market pans manly road race style pans since this is the type of pan i will need to run. i plan on using a oem stock pan and modify it to suit my needs, modified oem pump and modified pickup depending upon design of the pan. - just looking for ideas, plans, pics, tips anything of that nature would be great
#2
Supreme Member
Join Date: Jul 1999
Location: Ahead of you...
Posts: 2,752
Likes: 0
Received 6 Likes
on
5 Posts
Car: 1984 LG4 Camaro
Engine: 350 Roller Motor
Transmission: Level 10 700R4
Axle/Gears: Strange 12 bolt 3.42
Re: oil pan modifications ideas? (for road racing)
Why don't you just buy an aftermarket road race oil control pan? If you fabricate one yourself and make some miscalculations, you will have an engine good for a boat anchor or the like.
#3
Supreme Member
Join Date: Jan 2009
Location: Columbus Ohio
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28,64ImpalaSS4094spd,67 Galaxy
Engine: Dart 415Profiler hd,cmprlrs,Hlly750
Transmission: Built 700R4, 3200 stall
Axle/Gears: 3:89 Moser 9"
Re: oil pan modifications ideas? (for road racing)
I would get the proper pan for the proper job. Ever look into anexternal resivoir system, I hear they work quite well. I am planning on getting one for my car.
#4
Supreme Member
Thread Starter
iTrader: (18)
Join Date: Dec 2007
Location: Minnesota
Posts: 1,924
Likes: 0
Received 12 Likes
on
9 Posts
Car: 84 camaro, 88 trans am, 98 camaro
Engine: Modded , stock, LSX modded
Transmission: 700r4, 700r4, t-56
Axle/Gears: 327, 308, 373
Re: oil pan modifications ideas? (for road racing)
i plan on running a oil accumulator, screened windage tray, rear main pan baffle and crank scraper. im just going to cheap out and build my own pan its simple and easy - just looking for ideas for stop, go and high cornering G's to keep the pick up in oil with out starving it
#5
Supreme Member
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: oil pan modifications ideas? (for road racing)
a dry sump setup would be cool
#6
Supreme Member
Thread Starter
iTrader: (18)
Join Date: Dec 2007
Location: Minnesota
Posts: 1,924
Likes: 0
Received 12 Likes
on
9 Posts
Car: 84 camaro, 88 trans am, 98 camaro
Engine: Modded , stock, LSX modded
Transmission: 700r4, 700r4, t-56
Axle/Gears: 327, 308, 373
Re: oil pan modifications ideas? (for road racing)
No doubt!
iv looked into it. . . pricey, like i said keeping it on the cheap but effective side
iv looked into it. . . pricey, like i said keeping it on the cheap but effective side
#7
Supreme Member
Thread Starter
iTrader: (18)
Join Date: Dec 2007
Location: Minnesota
Posts: 1,924
Likes: 0
Received 12 Likes
on
9 Posts
Car: 84 camaro, 88 trans am, 98 camaro
Engine: Modded , stock, LSX modded
Transmission: 700r4, 700r4, t-56
Axle/Gears: 327, 308, 373
Re: oil pan modifications ideas? (for road racing)
Trending Topics
#8
Supreme Member
Thread Starter
iTrader: (18)
Join Date: Dec 2007
Location: Minnesota
Posts: 1,924
Likes: 0
Received 12 Likes
on
9 Posts
Car: 84 camaro, 88 trans am, 98 camaro
Engine: Modded , stock, LSX modded
Transmission: 700r4, 700r4, t-56
Axle/Gears: 327, 308, 373
Re: oil pan modifications ideas? (for road racing)
This seems like a good deal only thing is will it work with a 3rdgen
http://www.midwestmotorsportsinc.com...5120K&line=MWM
http://www.midwestmotorsportsinc.com...5120K&line=MWM
#9
Senior Member
iTrader: (1)
Re: oil pan modifications ideas? (for road racing)
i bought a canton road race pan came with the oil baffles and such nice piece better then trying to piece one together casue u would still have to buy baffels screens and scraper too that kit didnt have any of that and u would have to be precise on the scraper as not to hit the crank good luck though
#10
Supreme Member
Thread Starter
iTrader: (18)
Join Date: Dec 2007
Location: Minnesota
Posts: 1,924
Likes: 0
Received 12 Likes
on
9 Posts
Car: 84 camaro, 88 trans am, 98 camaro
Engine: Modded , stock, LSX modded
Transmission: 700r4, 700r4, t-56
Axle/Gears: 327, 308, 373
Re: oil pan modifications ideas? (for road racing)
Got any pics with your pan installed?
#11
Supreme Member
iTrader: (3)
Re: oil pan modifications ideas? (for road racing)
If you are going to buy an aftermarket oil pan there are a couple on considerations to keep in mind.
1. It will have to clear the k-member if you have the stock one and not a tubular one.
2. There will need to be enough clearance between the oil pan and the k-member if you are using the stock exhaust routing.
1. It will have to clear the k-member if you have the stock one and not a tubular one.
2. There will need to be enough clearance between the oil pan and the k-member if you are using the stock exhaust routing.
#12
Supreme Member
Thread Starter
iTrader: (18)
Join Date: Dec 2007
Location: Minnesota
Posts: 1,924
Likes: 0
Received 12 Likes
on
9 Posts
Car: 84 camaro, 88 trans am, 98 camaro
Engine: Modded , stock, LSX modded
Transmission: 700r4, 700r4, t-56
Axle/Gears: 327, 308, 373
Re: oil pan modifications ideas? (for road racing)
If you are going to buy an aftermarket oil pan there are a couple on considerations to keep in mind.
1. It will have to clear the k-member if you have the stock one and not a tubular one.
2. There will need to be enough clearance between the oil pan and the k-member if you are using the stock exhaust routing.
1. It will have to clear the k-member if you have the stock one and not a tubular one.
2. There will need to be enough clearance between the oil pan and the k-member if you are using the stock exhaust routing.
#13
Senior Member
iTrader: (1)
Re: oil pan modifications ideas? (for road racing)
i dont have the canton in the car yet as i havent finished my new motor but it will fit stock exhaust and clear a factory k member from what the website says i have a different k memeber and im gonna be runnin hooker LT's so won't ahve any problems
#14
Supreme Member
iTrader: (9)
Re: oil pan modifications ideas? (for road racing)
I strongly recommend just buying a pre-made pan. Go to Canton's website, they offer a road race style pan that will work with the stock crossmember and crossover exhaust. I'm running the 15-244t with long tubes. The canton pans have bungs for oil temp sensors, trap doors, windage trays, crank scrapers, you name it. I love mine and am glad I got it. I auto-x the car and I run 1-2 HPDE "open track day" and wanted to make sure I didnt run the engine out of oil. At 3000+ rpm around the right handed sweeper at Nelson Ledges the oil pressure gage never moved.
Thread
Thread Starter
Forum
Replies
Last Post
Navy8125
Engine/Drivetrain/Suspension Parts for Sale
4
08-21-2015 09:32 AM