Third Generation F-Body Message Boards

 
Page 1 of 10
1
2
3
4
5
Last »
Search: Posts Made By: blackbmagic
Showing results 1 to 50 of 497
Search took 0.11 seconds.
Forum: Auto Detailing and Appearance
12-22-2021, 03:31 PM
Replies: 7
Views: 1,562
Posted By blackbmagic

Re: Engine Bay Cleaning

You going to run the risk of oxidizing the paint, and even more so any bare aluminum (water pump, heads, intake manifold, carb etc will turn chaulky white) if you use degreaser by itself as its very...
Forum: Brakes
12-22-2021, 03:00 PM
Replies: 15
Views: 1,640
Posted By blackbmagic

Re: brake upgrades/conversions

There isnt a real significant improvement by upgrading the rear brakes on these cars. Thats why many just upgrade out of convenience. The pre 89 calipers are junk, but upgrading to aluminum calipers...
Forum: Brakes
12-22-2021, 02:58 PM
Replies: 4
Views: 703
Posted By blackbmagic

Re: rear brake drums

...
Forum: Aftermarket Vendor Review
07-26-2018, 08:04 AM
Replies: 8
Views: 2,367
Posted By blackbmagic

Re: SouthBay Promo Code

Looking for the Bosch 42lb 440cc. SKU 1162.
Forum: Aftermarket Vendor Review
07-23-2018, 02:30 PM
Replies: 8
Views: 2,367
Posted By blackbmagic

Re: SouthBay Promo Code

Code still doesnt work...is it only for tpi catagory? What about those of us who dont have TPI or have custom setups?
Forum: Exterior Parts Wanted
06-10-2017, 10:24 AM
Replies: 4
Views: 577
Posted By blackbmagic

Re: WTB 3"-4" Bolt on Cowl hood

Yes I am for sure
Forum: Aftermarket Product Review
05-26-2017, 07:52 AM
Replies: 177
Views: 42,037
Posted By blackbmagic

Re: FI Tech EFI?

Never had a computer controlled distributor so I cant comment.

I am talking about a standard HEI vs a external coil small cap distributor. The pickup coils are different. When locking out your...
Forum: Suspension and Chassis
05-26-2017, 07:32 AM
Replies: 4
Views: 2,842
Posted By blackbmagic

Re: GM type II Power Steering

Thank you
Forum: Aftermarket Product Review
05-25-2017, 05:25 PM
Replies: 177
Views: 42,037
Posted By blackbmagic

Re: FI Tech EFI?

I could be wrong but I don't believe HEI allows for a proper lockout of timing. Also, the HEI pickup is different than a coil driven pickup and can't be phased as well.
Forum: Aftermarket Product Review
05-24-2017, 10:39 AM
Replies: 177
Views: 42,037
Posted By blackbmagic

Re: FI Tech EFI?

Your least expensive option will be the Inline pump. It is frame rail mounted and must be below the tank level. Isolating it properly will reduce the noise but it will be loud and annoying. It's also...
Forum: Aftermarket Product Review
05-24-2017, 10:29 AM
Replies: 177
Views: 42,037
Posted By blackbmagic

Re: FI Tech EFI?

I don't use the PC software but I'm sure you can find on the web or through the manufacturer.

No they don't support it. The way HEI is designed it will not work well with computer controlled...
Forum: Aftermarket Product Review
05-24-2017, 10:07 AM
Replies: 177
Views: 42,037
Posted By blackbmagic

Re: FI Tech EFI?

I'm not sure exactly what you are asking here so I'll respond best I can.

With the fitech 600 you will have more programming capabilities than you will ever need naturally aspirated. You can add...
Forum: Suspension and Chassis
05-23-2017, 07:26 PM
Replies: 4
Views: 2,842
Posted By blackbmagic

Re: GM type II Power Steering

Looks great. I haven't seen it done much but I wouldn't do it an other way its not much cleaner. I do however want to convert to a ribber serpentine system.
Forum: Exterior Parts Wanted
05-23-2017, 07:19 PM
Replies: 4
Views: 577
Posted By blackbmagic

WTB 3"-4" Bolt on Cowl hood

Looking for a used 4" cowl hood, steel, fiberglass, CF..Doesn't matter. Can be any color, so long as its structurally sound and not in too bad of condition. Must be a bolt on, no pin on hoods.
Forum: Suspension and Chassis
05-22-2017, 10:18 PM
Replies: 4
Views: 2,842
Posted By blackbmagic

GM type II Power Steering

So, a few years ago I swapped in an S10 manual steering box. Worked great, just got tired of the effort it was taking to drive on the street.

I am in the process now to re-doing what I did when I...
Forum: Engine/Drivetrain/Suspension Parts for Sale
11-20-2016, 10:56 AM
Replies: 1
Views: 633
Posted By blackbmagic

Mighty Demon 750 Annular

Looking to sell my Demon as I have since gone EFI.

750CFM, Annular Boosters, Mechanical Secondaries.

Comes with Fuel Feed Rail, and Holley thread adapter.

$500.00

...
Forum: Brakes
11-18-2016, 09:59 PM
Replies: 23
Views: 6,565
Posted By blackbmagic

Re: Brake Caliper options

Oh Boy. You win.

Not commenting on tires because this is a brake thread.
Forum: Brakes
11-18-2016, 07:18 PM
Replies: 23
Views: 6,565
Posted By blackbmagic

Re: Brake Caliper options

Just realized I never posted this chart.

https://cimg5.ibsrv.net/gimg/www.thirdgen.org-vbulletin/1600x866/80-8109775661_036d0949fe_h_8dcf8d9d350d3612b3621d0a31f846a7aab66cb2.jpg
Forum: Brakes
11-17-2016, 08:38 PM
Replies: 23
Views: 6,565
Posted By blackbmagic

Re: Brake Caliper options

I think the main issue here is your looking at clamping pressure as the be all end all of brake performance. Like Paul said if that was the case everyone would go with a large single piston caliper,...
Forum: Brakes
11-16-2016, 12:34 PM
Replies: 23
Views: 6,565
Posted By blackbmagic

Re: Brake Caliper options

I'll agree with that. Having not taken apart the stock calipers can one assume that the 4 pot brembos also have a larger base diameter?

The bias remains reletively constant when swapping to the...
Forum: Brakes
11-16-2016, 10:13 AM
Replies: 23
Views: 6,565
Posted By blackbmagic

Re: Brake Caliper options

Malibudave.

The piston area on the stock caliper is 4.4 sq.in. while piston area on the CTSV calipers is 4.3 sq.in. not much of a difference. This nets you similar brake clamping force on a larger...
Forum: Brakes
11-12-2016, 10:51 PM
Replies: 23
Views: 6,565
Posted By blackbmagic

Re: Brake Caliper options

I wouldn't waste your money on those. Your basically paying $400 for otherwise stock calipers. Aluminum so you will shave some weight, and they look a little better but still TINY.

Brake...
Forum: Brakes
11-10-2016, 11:15 AM
Replies: 14
Views: 8,149
Posted By blackbmagic

Re: CTS-V Brakes behind 17" Wheels

Its possible but I don't believe so, it was a custom design I turned into a cad file.
Forum: Brakes
11-04-2016, 08:22 AM
Replies: 14
Views: 8,149
Posted By blackbmagic

Re: CTS-V Brakes behind 17" Wheels

Anyone?
Forum: Brakes
11-01-2016, 04:00 PM
Replies: 14
Views: 8,149
Posted By blackbmagic

Re: CTS-V Brakes behind 17" Wheels

Honestly this seems to be a hot topic about the pad overlap. It is probably the 5th time someone has commented on it. I would like to know why this can be such an issue? In my opinion there are so...
Forum: Brakes
10-31-2016, 07:42 PM
Replies: 14
Views: 8,149
Posted By blackbmagic

Re: CTS-V Brakes behind 17" Wheels

Yeah not much clearance at all on the wagon wheels, but plenty on the ZR1's.

Interested to find out what the effect will be of pad contact on that portion of the rotor. Honestly probably not much...
Forum: Brakes
10-30-2016, 05:15 PM
Replies: 14
Views: 8,149
Posted By blackbmagic

Re: CTS-V Brakes behind 17" Wheels

Now in terms of performance. They are bad ***. Unfortunately I never did a baseline stock brake test. At the moment I am putting the final touches on my fuel injection install, but after bedding the...
Forum: Brakes
10-30-2016, 05:12 PM
Replies: 14
Views: 8,149
Posted By blackbmagic

Re: CTS-V Brakes behind 17" Wheels

Now for the fun stuff. Its almost a shame the stock CTS-V coat is so nice, but it had to go. Hit them with a few coats of paint stripper and a quick sand blast.
...
Forum: Brakes
10-30-2016, 05:00 PM
Replies: 14
Views: 8,149
Posted By blackbmagic

Re: CTS-V Brakes behind 17" Wheels

On to the brake lines. In order from hardline to caliper:

Male -3AN to Female 10x1.0 Bubble Flare
20" PTFE SS Braided Line.
-3AN to 90º 10mm Banjo
10mm X 1.0 Banjo Bolt.
...
Forum: Brakes
10-30-2016, 04:47 PM
Replies: 14
Views: 8,149
Posted By blackbmagic

Re: CTS-V Brakes behind 17" Wheels

First off let me start off by saying these things are pretty massive.
...
Forum: Brakes
10-30-2016, 04:27 PM
Replies: 14
Views: 8,149
Posted By blackbmagic

CTS-V Brakes behind 17" Wheels

Recently I swapped to a 4th gen rear w/ LS brakes and decided the front needed the upgrade.

Size:Price the 04-07 CTS-V calipers are the way to go.

One problem, I wanted big brakes but did not...
Forum: Aftermarket Product Review
08-20-2016, 04:55 PM
Replies: 177
Views: 42,037
Posted By blackbmagic

Re: FI Tech EFI?

So, whats the verdict? Its been well over two weeks. I ordered my kit Friday and it is coming on Tuesday. So, I am sure you have yours.
Forum: Brakes
07-18-2016, 10:30 PM
Replies: 5
Views: 652
Posted By blackbmagic

Re: I just found this out today

Sooo you were looking for a disc brake conversion before you even looked at your own brakes. Im confused.

Rear brakes dont do much on these cars. Get your self some stock blank rotors and some...
Forum: Aftermarket Product Review
07-14-2016, 11:30 AM
Replies: 16
Views: 4,448
Posted By blackbmagic

Re: Edward's transmissions and engines are CROOKS! VIDEOS, and RECORDED PHONE CALLS

Sorry I feel for you and don't want this to come off the wrong way but another word of advice is tp really limit your use profanity and poor grammar when posting complaints. It doesn't come off...
Forum: Brakes
07-13-2016, 09:39 PM
Replies: 4
Views: 1,323
Posted By blackbmagic

Re: Wilwood FLS conversion

Just an FYI, that is just the spindle and hub kit with the necessary mods already done so the calipers and rotors just bolt on. Add another 550 minimum to this kit for the actual brakes.

Sorry...
Forum: Interior Parts Wanted
09-08-2015, 09:07 PM
Replies: 1
Views: 857
Posted By blackbmagic

Hard Top Headliner

As the title says, I am looking for a Hard Top Headliner. Any color preferably black.
Forum: Interior Parts for Sale
09-08-2015, 08:37 PM
Replies: 38
Views: 2,099
Posted By blackbmagic

Re: parts for sale pic up only

Do you have a Hardtop Headliner?
Forum: Auto Detailing and Appearance
05-03-2015, 09:51 PM
Replies: 23
Views: 2,322
Posted By blackbmagic

Re: Detailing Products Used - What's Yours?

Lot of great products out there. I have been MIA lately in the detailing world. Just did a quick detail this weekend. My stash right now is:

Soap: Zymol, and CG Mr.Pink
Fallout Removal: Nanoskin...
Forum: Auto Detailing and Appearance
05-03-2015, 09:21 PM
Replies: 16
Views: 1,357
Posted By blackbmagic

Re: Need overspray removal tips

NanoSkin Autoscrub on the DA. Good clay lube.

Never touch a clay bar again. Works wonders.
Forum: Body
05-03-2015, 08:48 PM
Replies: 8
Views: 1,338
Posted By blackbmagic

Re: New paint! Should I wet sand and clear?

You have a window. Your flash time, dust free time ect if you pass that window for clear the bond will never be as strong as it could have been. Sure scuffing it up to allow the paint to grip/bite...
Forum: Body
10-09-2013, 07:45 PM
Replies: 32
Views: 13,981
Posted By blackbmagic

Re: Summit paints....

Primer for the bumpers, was the same as for the car. Feather fill g2 ltgry stripped down to bare plastic, bully dog adhesion promoter and then primed/sealed with featherfill g2

Prep the bumpers...
Forum: Auto Detailing and Appearance
06-22-2013, 11:30 AM
Replies: 175
Views: 31,585
Posted By blackbmagic

Re: Counting cars

Wrong show bro^
Forum: Members Camaros
06-21-2013, 05:55 AM
Replies: 49
Views: 7,584
Posted By blackbmagic

Re: Some shots of my Camaro. Freshly Shaved and Painted finally.

Sure, I will try to get some pictures in the next few days. I have to get in there a do a few things anyway. Theres not a whole lot I can show, and setup is going to vary car by car.

I used 6AN...
Forum: Members Camaros
06-20-2013, 11:40 PM
Replies: 49
Views: 7,584
Posted By blackbmagic

Re: Some shots of my Camaro. Freshly Shaved and Painted finally.

Thanks guys, theres a lot more to go. Ill add as it comes



The rails were done same way I did the body and everything else. Welded blanks in the holes and ground down smooth, then used heavy...
Forum: Members Camaros
06-19-2013, 09:45 PM
Replies: 49
Views: 7,584
Posted By blackbmagic

Re: Some shots of my Camaro. Freshly Shaved and Painted finally.

So I haven't posted in awhile because I haven't really done too much. Some minor engine work and reworked some of the fuel lines. I went with black nylon braided lines mated to hardlines under the...
Forum: Auto Detailing and Appearance
06-11-2013, 08:06 PM
Replies: 3
Views: 586
Posted By blackbmagic

Re: Primer question???

Primer does somewhat absorb moisture. Which is why you need to seal before paint, unless the primer instructs otherwise.

The reason you must paint asap is because over time the primer can accept...
Forum: Auto Detailing and Appearance
04-11-2013, 09:50 AM
Replies: 56
Views: 36,227
Posted By blackbmagic

Re: Show me your Camaro/Bowtie grilles without fog lights

https://sphotos-b.xx.fbcdn.net/hphotos-prn1/13701_4066278986408_1959429035_n.jpg
Forum: Wheels and Tires
04-09-2013, 09:46 PM
Replies: 3
Views: 5,222
Posted By blackbmagic

Re: Help on Updated Drag wheel look

RTS are some of the nicest out there.

RaceStars are your other option...cheaper too. Seem to be a pretty popular option. Lots of people do different color powder coatings on them.
Forum: Engine/Drivetrain/Suspension Parts for Sale
04-07-2013, 07:40 AM
Replies: 3
Views: 329
Posted By blackbmagic

Re: A/C stuff for sale.

Your best bet is to try your best to match up different size bolts. I don't have anything to measure thread size and pitch. Sorry

Or buy the set I have.
Forum: Auto Detailing and Appearance
04-06-2013, 07:27 PM
Replies: 8
Views: 714
Posted By blackbmagic

Re: Clayed/Swirls Removed/Polished/Glazed and Waxed

Looks great!

Care to mention products, machines, process, you used to get there? Any before and after?
Showing results 1 to 50 of 497
 
Page 1 of 10
1
2
3
4
5
Last »


 
Forum Jump


All times are GMT -5. The time now is 01:02 AM.