Third Generation F-Body Message Boards

 
Page 1 of 2
1
2
Search: Posts Made By: tbroadfoot125
Showing results 1 to 50 of 66
Search took 0.03 seconds.
Forum: Cooling
04-06-2024, 03:54 PM
Replies: 10
Views: 320
Posted By tbroadfoot125

Re: heating pipes

A Friend of mine made new ones from copper pipe and sweated them together. Look around and you should be able to find some sweat fit hose barbs for the ends.
Forum: Cooling
03-19-2024, 07:02 PM
Replies: 3
Views: 235
Posted By tbroadfoot125

Re: Coolant Return Pipe

You can try Parts Voice https://www.partsvoice.com/
Look it by part number
I have known a couple people that made their own from copper pipe and sweating fitting on the ends
...
Forum: TPI
09-30-2022, 07:46 PM
Replies: 1
Views: 274
Posted By tbroadfoot125

Re: Upper plenum clip for cables

GM part number 8917256
Some on Ebay but pricey, Partsvoice see attachment
Highlighted Craig Motors I have dealt with before and they have a lot of parts and prices are not too bad. Very easy to...
Forum: TPI
09-25-2022, 10:41 AM
Replies: 1
Views: 350
Posted By tbroadfoot125

Re: Fuel line replacement

I removed the transmission back cross over support so I did not have to snake the lines over top of it. I supported the transmission with a floor jack, put the lines up and then put the crossover...
Forum: Tech / General Engine
07-16-2022, 08:08 PM
Replies: 7
Views: 470
Posted By tbroadfoot125

Re: URGENT: how to place gas tank

I have dropped my gas tank several times in my 83 Z28. I had help and we twisted and turned the tank to slowly feed the filler neck up into position. Then we lifted the tank up and held it in place...
Forum: Exhaust
06-14-2022, 05:17 PM
Replies: 3
Views: 584
Posted By tbroadfoot125

Re: Air Tube Delete

Sounds like a plan on how to cap it off. Thanks everyone!
Forum: Exhaust
06-11-2022, 07:55 PM
Replies: 3
Views: 584
Posted By tbroadfoot125

Air Tube Delete

83 Z28 with 87 305 TPI, upgraded to 90-92 Speed Density system. I have removed the AIR system and plugged the ports in the manifolds with stainless steel plugs. I was wondering do I need to plug...
Forum: Engine/Drivetrain/Suspension Parts for Sale
05-20-2022, 05:52 AM
Replies: 2
Views: 822
Posted By tbroadfoot125

Re: Moates ALDU1 and Cable

Interested if still available, do you accept PayPal friends and Family?
Forum: LTX and LSX
05-15-2022, 05:52 PM
Replies: 4
Views: 516
Posted By tbroadfoot125

Re: Header Coating

Look at a product called Zybar, you can either have a local dealer do them or you can do them yourself
Forum: TPI
05-06-2022, 04:44 PM
Replies: 603
Views: 102,556
Posted By tbroadfoot125

Re: EGR temp sensor has been discontinued

www.partsvoice.com
Create a free account and plug in information if anyone in the network has one it will come up. You can do it without creating an account but you don't get the contact...
Forum: TPI
04-26-2022, 06:34 PM
Replies: 3
Views: 896
Posted By tbroadfoot125

Re: code 22, anybody got a clue?

I have an shop manual for the 87 5.0 and 5.7l which says that a code 22 is TPS signal voltage low. Not sure if its the same for a 86 LB9. A short or ground in circuit 416 Gray wire (5v reference)...
Forum: Engine/Drivetrain/Suspension Wanted
04-17-2022, 03:54 PM
Replies: 0
Views: 226
Posted By tbroadfoot125

Motor Starter Brace 14037620

Looking for a starter motor brace, stock number 14037620 for a 1987 IROC Z, 305 TPI
Forum: Interior
03-13-2022, 06:02 AM
Replies: 5
Views: 492
Posted By tbroadfoot125

Re: Driver Side Cable Mirror Knob

https://cimg7.ibsrv.net/gimg/www.thirdgen.org-vbulletin/800x1052/10_11_ebd1c0cd0c18bd92194c4f2ff1a6bdabcf0d20de.gif
Forum: Brakes
03-11-2022, 07:37 PM
Replies: 7
Views: 1,171
Posted By tbroadfoot125

Re: Brake Vacuum Cannister

Looking at the picture, it appears that there is just a single hose going to the vacuum canister. Did you just place a "T" in the line from the plenum to the brake booster?
Forum: Tech / General Engine
03-08-2022, 06:16 PM
Replies: 2
Views: 462
Posted By tbroadfoot125

Re: TPI Fuel Rails

Thanks for the information
Forum: Tech / General Engine
03-06-2022, 04:44 PM
Replies: 2
Views: 462
Posted By tbroadfoot125

TPI Fuel Rails

I am in the process of cleaning out all the varnish and gunk from my 87 305 TPI fuel rails. I pulled the fuel pressure regulator off to replace it while I have everything part. I am in the process...
Forum: Cooling
02-28-2022, 06:06 PM
Replies: 21
Views: 3,766
Posted By tbroadfoot125

Re: Radiator and Cooling Hose Clamps

I bought my fuel injection style clamps from Amazon and some of the T Bolt clamps online from https://www.hoseandfittingsupply.com/T-Bolt-Clamp-p/301.htm.
I had to convert their mm range to my...
Forum: Cooling
02-27-2022, 07:18 PM
Replies: 21
Views: 3,766
Posted By tbroadfoot125

Radiator and Cooling Hose Clamps

While I am putting my Camaro (83 Z28 with 87 IROC-Z 305 TPI, converted to Speed Density) back together. I thought I would share an upgrade that I am going to do. I work industrial maintenance for a...
Forum: Tech / General Engine
02-20-2022, 12:38 PM
Replies: 0
Views: 549
Posted By tbroadfoot125

EGR Identification for testing

1987 5.0l, TPI. I have the upper part of the engine apart to flush the fuel system, since the car has sat for several years with fuel in the system and not ran. I figured while I have the plenum...
Forum: Cooling
02-20-2022, 08:56 AM
Replies: 6
Views: 739
Posted By tbroadfoot125

Re: Diverter valve ideas

I want to install the diverter valve on my 87 TPI, which had been removed. Probably a dumb question but I don't see on a vacuum diagram where the vacuum line goes to. Does it go to the HVAC port?
Forum: Engine/Drivetrain/Suspension Parts for Sale
02-13-2022, 01:56 PM
Replies: 4
Views: 372
Posted By tbroadfoot125

Re: $30 1985-88 TPI intake bellows

Sent through PayPal, Thank you!
Forum: Engine/Drivetrain/Suspension Parts for Sale
02-12-2022, 06:49 PM
Replies: 4
Views: 372
Posted By tbroadfoot125

Re: $30 1985-88 TPI intake bellows

Sorry I got my ads mixed up before. If it is still available, I still would like to get it. Can you send a paypal invoice to tbroadfoot125@yahoo.com?
Forum: Engine/Drivetrain/Suspension Parts for Sale
02-12-2022, 03:57 PM
Replies: 4
Views: 372
Posted By tbroadfoot125

Re: $30 1985-88 TPI intake bellows

If still available I will take it,, sent a email as I am interested in some other parts
Thanks
Forum: Electronics
01-27-2022, 07:09 PM
Replies: 4
Views: 495
Posted By tbroadfoot125

Re: 1987 iroc-z wirings in car

I hope these provide some help
https://cimg4.ibsrv.net/gimg/www.thirdgen.org-vbulletin/1000x1147/fig32_1987_body_wiring_775718a58a004d6646c1446b8cbdc3165cef1b0f.gif...
Forum: Tech / General Engine
01-23-2022, 08:09 PM
Replies: 12
Views: 1,439
Posted By tbroadfoot125

Re: TPI Fuel Rail Flush

Manual lists for a 87 305 TPI OEM are 19Lbs injectors. I was looking at South bay 19lbs injectors,new listing at 150 for a set of 8. Not sure of the brand currently in vehicle, never checked or...
Forum: Tech / General Engine
01-23-2022, 07:35 PM
Replies: 12
Views: 1,439
Posted By tbroadfoot125

Re: TPI Fuel Rail Flush

Going to pull the fuel rail out to flush them out, check the EGR and pull the fuel pressure regulator and check it out (when the North-East Ohio weather allows me to). Going to check the injectors...
Forum: Tech / General Engine
01-17-2022, 12:52 PM
Replies: 12
Views: 1,439
Posted By tbroadfoot125

Re: TPI Fuel Rail Flush

Sounds like a plan. Thanks for the advise
Forum: Tech / General Engine
01-17-2022, 09:09 AM
Replies: 12
Views: 1,439
Posted By tbroadfoot125

TPI Fuel Rail Flush

My car has been sitting for several years without running. I have a access panel cut for the sending unit so I pulled the sending unit out and the gas that was left in it was nasty. Did not smell...
Forum: Exterior Parts for Sale
01-09-2022, 08:15 PM
Replies: 184
Views: 14,692
Posted By tbroadfoot125

Re: What do you need? I’ve parted over 40 cars...

85-92 IROC-Z hood?
Forum: TPI
01-01-2022, 03:43 PM
Replies: 4
Views: 10,327
Posted By tbroadfoot125

Re: TPI fuel line sizes ???

I have a 87 5.0L TPI and on mine (and in the manual) the supply line is 3/8 OD and the return is 5/16 OD. Both have GM fuel line style flares that use a O ring seal....
Forum: Tech / General Engine
12-02-2021, 08:06 PM
Replies: 23
Views: 1,616
Posted By tbroadfoot125

Re: 1982 Z28 Can't find replacement purge solenoid?

Rock Auto has this part, 1982 Chevrolet Camaro 5.0 under emissions, canister purge valve lists for around 30 bucks
Forum: Tech / General Engine
12-02-2021, 06:18 PM
Replies: 1
Views: 437
Posted By tbroadfoot125

What Type of End is this

Can anyone identify what type of end this is? Pretty sure it is not a push connect style end but has a look of a gm fuel line. It is on the Vapor return line for my 83 Camaro Z28. The line is rusted...
Forum: Exhaust
11-25-2021, 07:27 AM
Replies: 7
Views: 1,138
Posted By tbroadfoot125

Header Recommendation

I have a 83 Z28 with a 87 IROC-Z 305 TPI which I have upgraded to the 90-92 Speed Density system. Presently, I have the SLP stainless steel Y pipe and the 3" stainless steel system back. I never...
Forum: Tech / General Engine
11-03-2021, 06:41 PM
Replies: 2
Views: 238
Posted By tbroadfoot125

Re: Fuel LInes

I thought about the copper nickel tubing for fuel lines. But I read an article that copper reacts with fuel and over time causes the fuel to thicken. I like the idea of the new plastic but adapters...
Forum: Tech / General Engine
11-01-2021, 09:06 AM
Replies: 2
Views: 238
Posted By tbroadfoot125

Fuel LInes

Not sure if posting into right area. 1983 Z28 with a 87 5.0 TPI converted to speed density system. My camaro has sat for several years now and I never got around to doing anything with fuel left in...
Forum: DIY PROM
08-26-2021, 07:07 PM
Replies: 1
Views: 498
Posted By tbroadfoot125

Prom Reprogramming

I am new to the programming so this question might be off the wall. I have a Memcal ADRR 3153 that came in a 7730 computer. I plan on using an AXYD for my 83 Z28 with a 87 305 TPI converted to...
Forum: Body
08-08-2021, 06:43 PM
Replies: 1
Views: 292
Posted By tbroadfoot125

Camaro Hoods

I figure that this has been asked somewhere before but I could not find it. I have an 83 camaro Z28 that came with the cross fire fuel injection. I have replaced the engine with an 87 IROC 305 TPI,...
Forum: Cooling
02-05-2017, 10:36 AM
Replies: 3
Views: 1,250
Posted By tbroadfoot125

Re: Cooling Fan Wiring

By the schematics, I agree with you about the fused power to the ECM. I also saw in the schematics that this is fuse is also for the heater blower motor, so I was thinking about putting an inline...
Forum: Cooling
02-05-2017, 09:11 AM
Replies: 3
Views: 1,250
Posted By tbroadfoot125

Cooling Fan Wiring

Greetings, I orginially posted in the Prom burning forum with a question about the Fan On/Off thresholds when the great members pointed out I had more issues then I thought. In a nut shell, I...
Forum: DIY PROM
02-05-2017, 08:58 AM
Replies: 9
Views: 1,149
Posted By tbroadfoot125

Re: Strange Fan On/Off Thresholds

I am going to move the cooling fan issue over into the Cooling forum since that seems like the right place for it. Want to thank everyone for the great help, did not realize I had a problem with the...
Forum: DIY PROM
02-04-2017, 06:51 PM
Replies: 9
Views: 1,149
Posted By tbroadfoot125

Re: Strange Fan On/Off Thresholds

Please bear with me, the wire harness I bought was after market without the A/C. I figured that all the A/C deletion was taken care of with the wiring harness, memcal and the cooling fan wiring...
Forum: DIY PROM
02-04-2017, 02:20 PM
Replies: 9
Views: 1,149
Posted By tbroadfoot125

Re: Strange Fan On/Off Thresholds

The A/C compressor for the engine was seized up and numerous A/C parts were missing when I got the engine from the salvage yard. During the install, I read a DYI article on how to eliminate the A/C...
Forum: DIY PROM
02-04-2017, 11:38 AM
Replies: 9
Views: 1,149
Posted By tbroadfoot125

Strange Fan On/Off Thresholds

AXYD Bin copied from memcal
$8D definition File
Tunerpro RT with moates hardware to copy the memcal
83 Z28 with 87 305 TPI converted to the 90-92 Speed Density 1227730 ECM

I am new to the...
Forum: Cooling
01-10-2016, 06:22 PM
Replies: 0
Views: 488
Posted By tbroadfoot125

Seconadary Cooling Fan Pressure Switch

1983 Z28 retrofitted with a 87 IROC-Z 5.0L TPI, converting to the 90-92 Speed Density System. The Car will be a A/C delete system.


Having no luck looking through the Forums, can someone tell me...
Forum: DIY PROM
12-26-2015, 08:50 PM
Replies: 1
Views: 691
Posted By tbroadfoot125

EPROMS

Been a while since I posted on the site. I was looking into programming my own prom for my car. Its actually a 83 Z28 which I put in a 87 IROC-Z 305 TPI in to, which I converted to the 90-92 Speed...
Forum: Fabrication
12-24-2012, 11:01 AM
Replies: 8
Views: 5,347
Posted By tbroadfoot125

Re: Headliner Repair/Fab

Some more of the headliner project pictures.

Headliner glued is the edge of the liner board when I glued it

Head Liner 2 Before is the condition of one of the edges that surround the seatbelt...
Forum: Fabrication
12-24-2012, 10:57 AM
Replies: 8
Views: 5,347
Posted By tbroadfoot125

Re: Headliner Repair/Fab

Sorry I did not post pictures before, I had to go back and search my camera and computer to see if I took any when I did the project. I was able to find some pictures from the project.

Head...
Forum: Fabrication
12-23-2012, 02:03 PM
Replies: 8
Views: 5,347
Posted By tbroadfoot125

Headliner Repair/Fab

I have a 83 Camaro Z28 that I am working on. The headliner material was sagging and coming off the foam back board. The foam board was also in sad shape. While numerous companies make aftermarket...
Forum: Electronics
11-24-2012, 01:29 PM
Replies: 2
Views: 825
Posted By tbroadfoot125

Re: Distributor and Coil Wiring

Thank you for your reply. I'm going to start wiring the distributor in tomorrow. I still have to pick up some thermal paste later today for under the module.

Thanks again
Forum: Electronics
11-24-2012, 12:19 PM
Replies: 2
Views: 825
Posted By tbroadfoot125

Distributor and Coil Wiring

I am upgrading from the older larger coil in cap style distributor to the newer smaller, remote coil distributor. I have purchased the gray and black (aftermarket) connectors for the coil, the 4...
Showing results 1 to 50 of 66
 
Page 1 of 2
1
2


 
Forum Jump


All times are GMT -5. The time now is 12:56 AM.