1Aauto

1987 - 1992 Chevy Camaro Convertible Weatherstrip Kit

This GM F-Body Convertible Top aftermarket replacement weatherstrip kit includes the following pieces:

4 Convertible Top Roofrail Seals
2 Door Seals
1 Convertible Rear Bow Seal
1 Convertible Top Header Bow Seal
2 Front Window Triangle Seals
1 Tonneau Cover Seal (door that covers convertible top when down)
If your weatherstripping is causing leaks allowing damaging rain in, then this weatherstrip kit is for you. Why not replace your old, hardened, rotted seal with this new, ready to install weatherstrip set.

If your weatherstripping is causing leaks allowing damaging rain in, then this weatherstrip kit is for you. Why not replace your old, hardened, rotted seal with this new, ready to install weatherstrip set.

1A Auto Parts Offers FREE SHIPPING On All Orders.

mister_hudson

iTrader: (3)

$600 is not too bad at all! I see that these pieces are all new, reproductions - is that correct? Will these also include the clips and any other hardware/paste/glue needed to compete the install?

1Aauto

It doesn't come with the 3M adhesive,although we do sell it. The weatherstrip are all exact replicas of the factory pieces.If the factory had little push pins in the seal,thes would too.They do not come with screws or anything like that.You would need to reuse the old hardware.

mister_hudson

iTrader: (3)

Awesome! Thanks, Tony! Now if Uncle Sam would get my check to me I'll be set!

blakecharles

Yo Tony,
Do you still have this deal? How much for shipping? How long dose it take to get? How much 3M will I need?

1Aauto

I had this package put together for you guys out here,so it's something we always carry.

You should be fine with one tube of 3M adhesive,a little goes a long way.Here's a link to it on the site.

3M weatherstrip Adhesive

Tonkatoy

Hi There
I'm not being rude just confused (Call me blonde )
What is the difference between your offer & this one for $450?
http://www.classicindustries.com/con...rchCatalogId=1

I need new seals & need them for winter in New Zealand.
What would the freight be as well?

1Aauto

Their kit looks like a 7 piece kit, our is 11 pieces.

blakecharles

Sorry to bring up this old thread...
I just want to let everyone know that this stuff shipped out fast (took only 3 days)!! I thought it was going to be from some off brand, but it's all made by "Super Soft". I paid $469usd, I must say... it's waaaay nicer then I thought it was going to be... I'm using it in my build thread here https://www.thirdgen.org/forums/ltx-...-swap-pic.html

Tony, I need the inner and outer window sweeps too, do you have them? (you should add them to the kit).

PS: Your kit is by far the cheapest for a 3rdgen conv

1Aauto

Thanks for your purchase.Here's a link to the inner and outer sweeps on the site. The inners include the plastic door cap for the top of the door panel.

Camaro Firebird Inner Outer Door Sweep Kit

blakecharles

finnaly got arround to installing some of this stuff. it's way nicer then the stock stuff... and by far cheaper then any other kit I have been able to find (also cheaper then buying everything separate)... and it's a name brand.

Just a follow up. thanx...

1Aauto

I had our purchasing guys put together this 18 PC kit for you vert guys this week too.

Convertible Camaro Weatherstrip Kit

91 Droptop

I want this kit, do you also have the hood to cowl seal, That would be the only other part I need, thanks

1Aauto

Yes we do it's located here.

Camaro Cowl To Hood Seal

GhostGTA

Tony,

I have an 88 Firbeird. Do you have a comparable weatherstrip kit for my Firebird, like the Camaro kit?

1Aauto

HI We shure do. Here's a link to them on our website

Convertible Firebird Weatherstrip Kit

91 Droptop

Just ordered the kit and the hood to cowl, thanks for all the help. I will be back for the carpet and top.

1Aauto

You're welcome. Thank you for your order.

Tony

91 Droptop

The hood to cowl seal does not fit right, I have looked at the old one and It looks like I have to pull a few pins, I am stumped

1Aauto

Do you have a couple of pictures that you can send me of the old vs the new, so I can see what the issue may be.

Thanks,
Tony

91 Droptop

hope these help

1Aauto

From the pictures it looks like some of the pins on your original piece have broken off.

91 Droptop

It still does not match up under the hood ( the pins don't match the holes)

ThePain

You rock Tony, thanks to you and 1A for working so hard for us!

1Aauto

You may have to stretch the seal a little to line up with the holes. It's suppose to fit somewhat snug.

Try this and for some reason it still doesn't work, call our office at 888-844-3393 and one of the sales guys can help you out.

I should fit though, we sell quite a few of these and never really have any issues, but anything's possible I guess.

Let me know how you make out.

Tony

91 Droptop

10-4 I will try and strech it, I was afraid to start pulling it out of shape

BlueZee28

iTrader: (30)

I signed up with my email to get a notification when this set is available again. Hopefully soon, I want this for when my car gets repainted. There's not much left of the weatherstripping on my car unfortunately...

EDIT: I signed up for notification on the complete 18 piece set, not this one. Anyways, I hope you get them in stock soon!

91 Droptop

Really nice kit, i have not put on the new top yet so I havent used that section yet but the sweeps and door stuff fits great. The only part not included was the hood to cowl seal. I will put this on once I take the hood back off to put the new motor in.

1Aauto

These are back in stock.

1Aauto

ttt

ZZ42Fast

iTrader: (2)

I would buy this and find it amazing you do not ship outside the US.

1Aauto

HI, We only ship in the USA & CANADA

ZZ42Fast

iTrader: (2)

Yep, that's what I said. Shame man as you do some great stuff.

1Aauto

Sorry we're just not set-up to ship over seas.

craig.aspdin

I bought rear bow seal for my 92 convertible. it was so rotten I can't see how it connects. Any videos?