three point strut brace w/ HSR
#1
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Location: Kissimmee, FL
Posts: 1,941
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 357cid
Transmission: T5 Swap
Axle/Gears: 10bolt 7.5" 3.23 soon to be 3.73
three point strut brace w/ HSR
I guess my question is a bit simple will a 3point strut brace for the TPI set up fit with my HSR or will i be building a custom one
#2
Banned
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: three point strut brace w/ HSR
Is a HSR taller? If so, I'd guess custom. I have an Edelbrock 3-pt and have MAYBE 3/16" clearance. I can sit in the car with the hood open, and see A LITTLE light under it, between the bar & the plenum. Under throttle stabs, it doesn't hit.
I think the BMRs are a plate over the center, not a box, so it would provide more clearance, but I'm not a fan of the BMR design. Seem, to me, like it would be too flexible in that center area, compared to a boxed section. Might be your only choice besides custom though.
I think the BMRs are a plate over the center, not a box, so it would provide more clearance, but I'm not a fan of the BMR design. Seem, to me, like it would be too flexible in that center area, compared to a boxed section. Might be your only choice besides custom though.
#3
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Location: Kissimmee, FL
Posts: 1,941
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 357cid
Transmission: T5 Swap
Axle/Gears: 10bolt 7.5" 3.23 soon to be 3.73
Re: three point strut brace w/ HSR
Is a HSR taller? If so, I'd guess custom. I have an Edelbrock 3-pt and have MAYBE 3/16" clearance. I can sit in the car with the hood open, and see A LITTLE light under it, between the bar & the plenum. Under throttle stabs, it doesn't hit.
I think the BMRs are a plate over the center, not a box, so it would provide more clearance, but I'm not a fan of the BMR design. Seem, to me, like it would be too flexible in that center area, compared to a boxed section. Might be your only choice besides custom though.
I think the BMRs are a plate over the center, not a box, so it would provide more clearance, but I'm not a fan of the BMR design. Seem, to me, like it would be too flexible in that center area, compared to a boxed section. Might be your only choice besides custom though.
#4
Banned
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: three point strut brace w/ HSR
Ssssssoollliidddd mmmoouuuunnnttssss.......Nnnniiiccceee......
Now....Where'd my tooth fillings go?
On my 'Bird, I had some STB to hood clearance problems, but nothing a BFH couldn't fix!
Now....Where'd my tooth fillings go?
On my 'Bird, I had some STB to hood clearance problems, but nothing a BFH couldn't fix!
#5
Supreme Member
iTrader: (1)
Join Date: Jun 2001
Location: Tacoma, Wa
Posts: 3,109
Likes: 0
Received 25 Likes
on
17 Posts
Car: '91 TA vert
Engine: turboLSx
Transmission: T56
Axle/Gears: 3.23
Re: three point strut brace w/ HSR
No, a TPI version will not fit.
Stephen, your bird was the first issue I had ever heard with birds and clearance issues. Weird.
Stephen, your bird was the first issue I had ever heard with birds and clearance issues. Weird.
#6
Banned
iTrader: (12)
Join Date: Jul 1999
Location: Bertram (outside Austin), TX
Posts: 12,212
Likes: 0
Received 10 Likes
on
10 Posts
Car: 87 GTA
Engine: L98
Transmission: 700R4
Axle/Gears: Dana M78 3.27 posi
Re: three point strut brace w/ HSR
https://www.thirdgen.org/forums/susp...ml#post3752492
#7
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Mar 2004
Location: Kissimmee, FL
Posts: 1,941
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 357cid
Transmission: T5 Swap
Axle/Gears: 10bolt 7.5" 3.23 soon to be 3.73
Re: three point strut brace w/ HSR
as for the mounts only thing ive had so im used to em.... lol T-Top rattles anyone....
----------
looks like im welding something up... lol cowl hood FTW
Last edited by Saigon_Bob; 05-24-2008 at 08:00 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post