315/35/17 on a 17x10 rim info please!!!!!
#1
315/35/17 on a 17x10 rim info please!!!!!
I've already searched all the previous posts with no real straight answer for this (at least not with all the details). I already have the tires and I still need to get the rims if I understand correctly 315's will fit on a 17x10 rim on the back of our cars correct? (Oh yeah I will be putting 275's up front on a 17x9.5 but i already have that figured out) Now here is the important part what backspaceing EXACTLY do I need? What else needs to be done to the wheel wells and I'm not clear as to if anything else needs to be done other than banging out the wheel wells? Do I need to do anything with the LCA's? Does anyone have all the info on doign this or know someone I could e-mail about this? Thanx a lot
------------------
Karsten
86 IROC-ZZ4... too much to list.
------------------
Karsten
86 IROC-ZZ4... too much to list.
#2
17x9.5s should have 5.5" backspacing. 315s usualy go on 17x11s. You might want to check out 295s
------------------
-Tas
'89 Formula WS-6
305, TBI, 700R4, P.A.W. 14x3 open element with K&N, Milodon 160* thermo, functional Formula hood, cross-flow Flowmaster, '99z28 rear pipes and tips, Hooker 1-5/8" 50 state legal headers, Dynomax 3" I pipe (PN 44063 and 43248)
Super GRK_Taz World
F-Body Dual Exaust
EFI & Intake Options
[This message has been edited by Tas (edited November 16, 2001).]
------------------
-Tas
'89 Formula WS-6
305, TBI, 700R4, P.A.W. 14x3 open element with K&N, Milodon 160* thermo, functional Formula hood, cross-flow Flowmaster, '99z28 rear pipes and tips, Hooker 1-5/8" 50 state legal headers, Dynomax 3" I pipe (PN 44063 and 43248)
Super GRK_Taz World
F-Body Dual Exaust
EFI & Intake Options
[This message has been edited by Tas (edited November 16, 2001).]
#3
Yeah so what backspacing do I need on the 17x11's I know the 275s will fit fine on the 17x9.5's with 5.5 but I need to know exactly what to do with these rear tires..
------------------
Karsten
86 IROC-ZZ4... too much to list.
------------------
Karsten
86 IROC-ZZ4... too much to list.
#4
Ask this guy. He has awesome customer service. http://www.skulte.com/
------------------
-Tas
'89 Formula WS-6
305, TBI, 700R4, P.A.W. 14x3 open element with K&N, Milodon 160* thermo, functional Formula hood, cross-flow Flowmaster, '99z28 rear pipes and tips, Hooker 1-5/8" 50 state legal headers, Dynomax 3" I pipe (PN 44063 and 43248)
Super GRK_Taz World
F-Body Dual Exaust
EFI & Intake Options
------------------
-Tas
'89 Formula WS-6
305, TBI, 700R4, P.A.W. 14x3 open element with K&N, Milodon 160* thermo, functional Formula hood, cross-flow Flowmaster, '99z28 rear pipes and tips, Hooker 1-5/8" 50 state legal headers, Dynomax 3" I pipe (PN 44063 and 43248)
Super GRK_Taz World
F-Body Dual Exaust
EFI & Intake Options
#5
Junior Member
You'll need 6" of backspacing on a 17x11" rim to fit.
This is a concrete #.
I've had mine on for 2 years or so.
You will get some rubbing on the top, tip wheel well lip on hard dips since the tire does not fit in the wheel well itself.
Other than hammering the inside wheel well they WILL fit and you'll love it.
This is a concrete #.
I've had mine on for 2 years or so.
You will get some rubbing on the top, tip wheel well lip on hard dips since the tire does not fit in the wheel well itself.
Other than hammering the inside wheel well they WILL fit and you'll love it.
Thread
Thread Starter
Forum
Replies
Last Post
LiquidBlue
Wheels and Tires
32
12-10-2019 04:06 PM
Linson
Auto Detailing and Appearance
12
10-01-2015 09:50 PM