Good Combo ?
#1
Member
Thread Starter
Join Date: Nov 2005
Location: Quebec
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Firebird
Engine: 305 TBI (LO3)
Transmission: 700R4
Axle/Gears: 10 bolts 2.73
Good Combo ?
OK , i got a '89 Firebird with an LO3 . Since 2 years iv'been running it with a huge exhaust leak (I mean huge : manifold , muffler , just after the y pipe ...) . Now i just bought hedman hedders 1 5/8 shortys and 2 1/2 y pipe and ordered a 3'' cat-back from Flowmaster . The engine has an open air element , but it is otherwise completely stock and runs really nice for a 343k motor . Right now it made 16.6 passes (lame) . Is it a good combo for a TBI car ? Will it beneficiate from an intake ? What kind of time slips should I expect ?
#2
Supreme Member
Join Date: Feb 2002
Location: Buckhannon, WV
Posts: 2,663
Likes: 0
Received 3 Likes
on
2 Posts
Car: 84' Monte
Engine: 350
Transmission: 700-r4
Axle/Gears: ferd 9" posi 3.50 gears
Re: Good Combo ?
340,000 miles !!!!!
I'd be happy that it would even drive a quarter mile let alone do it in less than 17 seconds.
A fresh 305 with those mods and your 2.73 gears should run high 15's, a gear swap would get you into the low 15's.
Your next step would be a cam swap and diy tuning. This could get you into the mid to low 14's with it tuned properly.
Seriously, a rebuild or 350 swap would be next on my list of things to do.
I'd be happy that it would even drive a quarter mile let alone do it in less than 17 seconds.
A fresh 305 with those mods and your 2.73 gears should run high 15's, a gear swap would get you into the low 15's.
Your next step would be a cam swap and diy tuning. This could get you into the mid to low 14's with it tuned properly.
Seriously, a rebuild or 350 swap would be next on my list of things to do.
#4
Member
Thread Starter
Join Date: Nov 2005
Location: Quebec
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Firebird
Engine: 305 TBI (LO3)
Transmission: 700R4
Axle/Gears: 10 bolts 2.73
Re: Good Combo ?
I had a sbc 400 .030 oversized , decked . But I sold it ...
Thread
Thread Starter
Forum
Replies
Last Post
NufNuffZ28
History / Originality
2
08-14-2015 09:12 AM