Sportsman II heads and compatibility?
04-05-2002, 12:32 AM
#1
Member
Thread Starter
iTrader: (1)
Join Date: Jul 2001
Location: Temecula, CA
Posts: 202
Likes: 0
Received 1 Like
on
1 Post
Car: '99 Cobra
Engine: 4.6 DOHC 32V
Transmission: T-45
Axle/Gears: 4.10
Sportsman II heads and compatibility?
I have a 91 RS (305 TBI) now and would like to start beefing it up. I'm looking at the World Sportsman II (64 CC cast iron) to start with. I have a couple questions :
1. Is it compatible with the stock intake manifold?
2. If not, which must I buy?
3. Any suggested cam to buy? Max lift on these heads is 0.560"
Any other info I should now about this job I would really appreciate it. Thanks a lot guys!
Eric
1. Is it compatible with the stock intake manifold?
2. If not, which must I buy?
3. Any suggested cam to buy? Max lift on these heads is 0.560"
Any other info I should now about this job I would really appreciate it. Thanks a lot guys!
Eric
04-05-2002, 05:11 PM
#2
Supreme Member
I'm pretty sure they just come in the 67cc and 76cc chambers. Prove me wrong!
1. I dont think that the Sportsmans come in the 87-95 bolt pattern, so no.
2.You need to buy any intake that's pre-86 bolt pattern. There's a lot of great intakes out there. For a non-emissions car, you might as well go with a single plane.
3.Well go with a roller. The LT1 cam is cheap and popular but Comp Cams makes a great lineup of roller cams that fit into our cars.
1. I dont think that the Sportsmans come in the 87-95 bolt pattern, so no.
2.You need to buy any intake that's pre-86 bolt pattern. There's a lot of great intakes out there. For a non-emissions car, you might as well go with a single plane.
3.Well go with a roller. The LT1 cam is cheap and popular but Comp Cams makes a great lineup of roller cams that fit into our cars.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
92projectcamaro
Engine/Drivetrain/Suspension Parts for Sale
11
01-18-2016 08:00 AM
