Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
View Poll Results: Vote for best oil filter for the dollar!
STP $3.00
3
8.11%
BOSCH $6.00
1
2.70%
MOBIL $12.00
2
5.41%
FRAM $3.50
2
5.41%
K&N $15.00
5
13.51%
AC-DELCO (?)
20
54.05%
PUROLATOR $3.00
4
10.81%
Voters: 37. You may not vote on this poll

Vote for best oil filter for the dollar!

Thread Tools
 
Search this Thread
 
Old 11-27-2002, 11:18 PM
  #1  
Banned
Thread Starter
 
89IRO's Avatar
 
Join Date: Aug 2002
Location: So Cal
Posts: 910
Likes: 0
Received 0 Likes on 0 Posts
Vote for best oil filter for the dollar!

Yeah, what is your favorite oil filter? Sure, you get what you pay for, that's why I'm puting the aproximate price for each. I'm tight on money and I'm gonna change my oil about every 2,500 miles so I don't need a $20 filter. Anyways, go for it. -89IRO
Old 11-27-2002, 11:25 PM
  #2  
Junior Member
 
midnightcamaro's Avatar
 
Join Date: Jul 2002
Location: sc
Posts: 66
Likes: 0
Received 0 Likes on 0 Posts
man i havent really had good luck with fram oil filters some peeps are die hard fram fans but i would buy one. ive had cases with lower oil pressure with fram. if ur on a budget and just want a good basic quality filter go with the brand inteded for ur car AC Delco. just from my experience.
Old 11-27-2002, 11:43 PM
  #3  
Supreme Member

 
Mark A Shields's Avatar
 
Join Date: Jan 2001
Location: Someone owes me 10,000 posts
Posts: 7,164
Likes: 0
Received 1 Like on 1 Post
Car: 99 Formula
Engine: LS1
Transmission: T56
Axle/Gears: 342
It's hard to find die hard Fram fans on here, thanks to the good info given out, they're crap.

I use AC for the IROC and Motorcraft for the Stang.
Old 11-27-2002, 11:50 PM
  #4  
Member
 
Benny's Avatar
 
Join Date: Oct 2002
Location: Ewa Beach, Hawaii
Posts: 467
Likes: 0
Received 0 Likes on 0 Posts
AC 1218 for me.
Old 11-28-2002, 12:19 AM
  #5  
Supreme Member
 
'87FAKE-IROC-Z's Avatar
 
Join Date: Nov 2000
Location: San Antonio, TX
Posts: 1,078
Likes: 0
Received 0 Likes on 0 Posts
Car: Damn
Engine: This
Transmission: New Stuff
I use AC Delco whenever I can find them, getting harder to get them around here.
Old 11-28-2002, 12:58 AM
  #6  
Member
 
Black88GTA's Avatar
 
Join Date: Jul 2002
Location: Long Island (Huntington), NY
Posts: 212
Likes: 0
Received 0 Likes on 0 Posts
Car: 88 GTA, 94 BMW 840, SVX, Prelude
Engine: 383 w/ Super Ram
Transmission: built 700R4 auto
Purolator Pure One....@4 or 5 bucks, work very well (IMO) and are painted this cool metallic blue color !
Old 11-28-2002, 02:49 AM
  #7  
Supreme Member
iTrader: (1)
 
EvilCartman's Avatar
 
Join Date: Apr 2000
Location: Northern CA.
Posts: 5,321
Likes: 0
Received 4 Likes on 4 Posts
Car: '82 Z28
Engine: 350
Transmission: TH400 4,000 stall
Axle/Gears: Currie 9", 4.56 gears
I've been using the NAPA Gold filters :lala:
Old 11-28-2002, 04:30 AM
  #8  
Member
 
Kevin Johnson's Avatar
 
Join Date: Jul 2002
Posts: 297
Likes: 0
Received 0 Likes on 0 Posts
Wal-mart house brand filters are dirt cheap ($3 or less, I think) and seem to work well. It would be interesting to find out who private labels for them. Might be a big name brand (not Fram, I'm pretty sure).
Old 11-28-2002, 05:36 AM
  #9  
Member
 
92camaro's Avatar
 
Join Date: Jul 2002
Location: Greer, SC
Posts: 151
Likes: 0
Received 0 Likes on 0 Posts
I would only use an AC Delco for a Chevy and a Motorcraft for a Ford. I have also had very bad luck with Fram Filters so I try to say away from them. Just my $.02
Old 11-28-2002, 05:59 AM
  #10  
ede
TGO Supporter

 
ede's Avatar
 
Join Date: Aug 1999
Location: Jackson County
Posts: 14,811
Likes: 0
Received 1 Like on 1 Post
i pay less then 3.5 for ac filters and around 7 for wix, but wix are a bit harder to find, or a longer drive.
Old 11-28-2002, 08:43 AM
  #11  
TGO Supporter

iTrader: (2)
 
Jim85IROC's Avatar
 
Join Date: Jul 1999
Location: Readsboro, VT
Posts: 13,574
Received 9 Likes on 8 Posts
Car: 85 IROC-Z / 88 GTA
Engine: 403 LSx (Pending) / 355 Tuned Port
Transmission: T56 Magnum (Pending) / T5
Axle/Gears: 3.42 / ?
I put AC on everything except my IROC. On the IROC I put an overpriced K&N filter on.
Old 11-28-2002, 09:28 AM
  #12  
Member
 
Kevin Johnson's Avatar
 
Join Date: Jul 2002
Posts: 297
Likes: 0
Received 0 Likes on 0 Posts
Ok, found a bit more info re Wal-Mart SuperTech filters. They run about $2 each and "are made by Champion Laboratories who make Mobil One and Bosch filters and also some automaker brands. While they may not have the advanced filter media of the highest efficiency and highest priced filters, they are considered premium filters and will peform well."

http://www.yft.org/tex_vfr/tech/oilfilter.htm
Old 11-28-2002, 04:36 PM
  #13  
Senior Member

 
dans82bird's Avatar
 
Join Date: Jan 2001
Location: South NJ
Posts: 908
Likes: 0
Received 0 Likes on 0 Posts
Car: 1988 Mustang GT
Engine: 302
Transmission: T5
I use K&N... and they are not 15 dollars, more like 8 - 10 at the local discount auto parts. I've heard AC Delco and Mobil 1 aren't that bad..... NEVER PUT A FRAM IN ANY CAR!!!!!!!! I did once.... the defective POS broke off when i started my car and 5 quarts of mobil 1 everywhere (i think i cried). so anyway i got a K&N ever since :lala:
Old 11-28-2002, 07:08 PM
  #14  
Junior Member
 
tiggermanoman's Avatar
 
Join Date: Oct 2002
Location: Metro of Hughes Springs,TEXAS
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Ok, have any of you guys ever used the more expensive brand FRAM filter HP4 for chevy's and HP1 for fords. They are 7.50 at wal-mart and I have not had any performance/filter problems and use 10w30 Mobil 1. They are a finer mesh than your average paper cartridge filter and seem to keep my oil cleaner longer. Just my opion.
Old 11-28-2002, 07:30 PM
  #15  
TGO Supporter

 
Justins86bird's Avatar
 
Join Date: Jul 1999
Location: Another world, some other time
Posts: 3,838
Likes: 0
Received 4 Likes on 4 Posts
Car: 86 LG4 & 92 TBI Firebird
Engine: The Mighty 305!
Transmission: 700R4
Axle/Gears: 3.42
Originally posted by '87FAKE-IROC-Z
I use AC Delco whenever I can find them, getting harder to get them around here.
Same here.
Old 11-28-2002, 08:18 PM
  #16  
Senior Member

 
dans82bird's Avatar
 
Join Date: Jan 2001
Location: South NJ
Posts: 908
Likes: 0
Received 0 Likes on 0 Posts
Car: 1988 Mustang GT
Engine: 302
Transmission: T5
Originally posted by tiggermanoman
Ok, have any of you guys ever used the more expensive brand FRAM filter HP4 for chevy's and HP1 for fords. They are 7.50 at wal-mart and I have not had any performance/filter problems and use 10w30 Mobil 1. They are a finer mesh than your average paper cartridge filter and seem to keep my oil cleaner longer. Just my opion.
WRONG!!! if you've ever seen that site that did the oil filter comparisons the only difference is that they made it a bigger case!!!!
Old 11-28-2002, 08:25 PM
  #17  
Supreme Member
 
jcb999's Avatar
 
Join Date: Aug 1999
Location: College Station, Tex USA
Posts: 1,443
Likes: 0
Received 0 Likes on 0 Posts
Car: 89rs
Engine: 400Sb
Transmission: Tremec 3550
only test im aware of indicates good performance for the pure 1

http://www.minimopar.net/oilfilterstudy.html
Old 11-28-2002, 08:57 PM
  #18  
Junior Member
 
tiggermanoman's Avatar
 
Join Date: Oct 2002
Location: Metro of Hughes Springs,TEXAS
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Thank you so much for info on filter study it was an eye opener, and to hear it from a person who worked there helps convince me even more that tomorrow a good ole Delco PF-35 duraguard will be replacing the high dollar cheaply made and not filtering a bit FRAM H.P4.
Old 11-28-2002, 09:41 PM
  #19  
Supreme Member

 
V6camaroman's Avatar
 
Join Date: Jul 2001
Location: Apex North Carolina
Posts: 1,007
Likes: 0
Received 0 Likes on 0 Posts
i pay the $9.99 and buy the k&n for my birdy. seems to work good.
Old 11-28-2002, 09:45 PM
  #20  
Supreme Member

 
82camaro's Avatar
 
Join Date: Nov 1999
Location: NE
Posts: 2,860
Likes: 0
Received 2 Likes on 2 Posts
Car: 82 camaro SC
Engine: 350
Transmission: 700r4
The champ labs 'wal-mart' filter is probably the best for the money. It's a good filter with part synthetic filter media. I've cut one open and the construction is good--a million times better than a fram. But that doesn't take much. However, wal-mart carries Baldwin filters at our location(the factory is on the edge of town) for 3.80 a filter. IMO the best filter you can buy. makers of the Amsoil filters from what I've heard.
Old 11-28-2002, 10:06 PM
  #21  
Supreme Member
 
TBI305Camaro's Avatar
 
Join Date: Dec 2001
Location: Barboursville, WV
Posts: 2,378
Likes: 0
Received 1 Like on 1 Post
I use k&n myself. I work at advance so I get a discount..they are 8.99+a 20% discount so its pretty cheap. I also run valvoline full synthetic so oil changes get pretty pricy now
Old 11-28-2002, 11:39 PM
  #22  
Senior Member

 
R.O.B.'s Avatar
 
Join Date: Aug 1999
Location: Glendale, AZ
Posts: 611
Likes: 0
Received 0 Likes on 0 Posts
Best bang for buck, NAPA Silver series. Better step up would be the Gold series. These filters are made by WIX, and if you have ever seen a filter cut open before, NAPA's win by a mile. Puralator and AC Delco come in at a close second. And I've done the research, Gold series will trap down fewer microns (forgot the number) at 98% efficency, vs. Mobil 1 filters at 97%.
Old 11-29-2002, 01:32 AM
  #23  
Member
 
86TransAMsbc305's Avatar
 
Join Date: Nov 2002
Location: Bush, Louisiana, USA
Posts: 240
Likes: 0
Received 0 Likes on 0 Posts
Car: 1986 Pontiac Trans Am
Engine: LG4 305
Transmission: 700R4
AC for me
Old 11-29-2002, 07:45 AM
  #24  
Senior Member
 
Fast3rdGen's Avatar
 
Join Date: Mar 2002
Location: fairborn, ohio
Posts: 586
Likes: 0
Received 0 Likes on 0 Posts
pricey but their products are all i will use: Amsoil. they are locally available in my area.
Old 11-29-2002, 09:19 AM
  #25  
Banned
Thread Starter
 
89IRO's Avatar
 
Join Date: Aug 2002
Location: So Cal
Posts: 910
Likes: 0
Received 0 Likes on 0 Posts
Too bad there aren't any NAPA stores near me. -89IRO
Old 11-29-2002, 05:05 PM
  #26  
Banned
Thread Starter
 
89IRO's Avatar
 
Join Date: Aug 2002
Location: So Cal
Posts: 910
Likes: 0
Received 0 Likes on 0 Posts
Just got through with my oil change on my IROC-Z. I put in an AC Delco filter and I've never seen my oil pressure that high! Damn fram filter I had on there before wasn't even letting my oil flow. I found it ammusing at autozone how there were several rows of different fram filters with their "high-tech" looking boxes, and on one shelf all by themselves were the ACs. Thanks for all the info guys. Never will I buy a fram again! -89IRO
Old 11-29-2002, 08:35 PM
  #27  
Member
 
Benny's Avatar
 
Join Date: Oct 2002
Location: Ewa Beach, Hawaii
Posts: 467
Likes: 0
Received 0 Likes on 0 Posts
AC Delco are nice filters I use the 1218 which is the tall one, they make the short one also that fits our cars, I used to buy the AC filter at the dealer because they had the synthetic ones, I do not know if they make those anymore but they were nice. Maybe in the GM performance catalog. Anybody know?
Old 11-29-2002, 08:48 PM
  #28  
Member
 
Hung Start67's Avatar
 
Join Date: May 2002
Location: redneck central
Posts: 192
Likes: 0
Received 0 Likes on 0 Posts
filter

i guess it would have to be the delco in my opinion..but i run an amsoil now and no looking back...
Old 11-29-2002, 09:46 PM
  #29  
Junior Member
 
ben71's Avatar
 
Join Date: Nov 2002
Location: Alhambra, CA
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Car: 1970 Chevelle
Engine: 540" BBC
Transmission: TH400
I run a K&N Gold with a Filtermag for good measure.

Ben71
Old 11-29-2002, 10:09 PM
  #30  
Member
 
PonchoTA's Avatar
 
Join Date: Apr 2001
Location: Everett, WA, USA
Posts: 377
Likes: 0
Received 0 Likes on 0 Posts
I've been using a System1 filter now for about 6 years, rinse and reuse every 2500 miles. Awesome filtering and doesn't take up any room in landfill, nor do you have to worry about polluting the environment.

Yes, it's a little more expensive at first, but if it's the last filter you have to buy, then the price goes down, real fast!!
Old 11-01-2004, 11:20 AM
  #31  
Supreme Member
 
grafx's Avatar
 
Join Date: Nov 2001
Location: So. California
Posts: 1,160
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 Camaro RS
Engine: 305 TBI
Transmission: Pro-Built Automatic/Vigilante 2800
Had no idea so many people were opposed to Fram filters and that so many were more for an AC-Delco. Figured more would vote for the aftermarket performance filters. I've been putting my trust in Fram for years, now I think I better change.
Old 11-01-2004, 11:49 AM
  #32  
Supreme Member
 
Nate86's Avatar
 
Join Date: Jul 2003
Location: Pensacola, FL
Posts: 1,104
Likes: 0
Received 1 Like on 1 Post
Car: 1999 Saturn SL2
Engine: 4 cylinder
Transmission: 4-speed automatic
In all honesty, I wouldn't be too worried about using a FRAM filter. I think a lot of the people on many performance automotive boards are quick to call FRAM crap just because everyone else does.

Other than the one oil filter study that someone posted earlier, I have yet to actually see hard evidence of FRAM's filters being so bad that they are a danger to your car... which is what people make them out to be.

Hell, even the guy that did the so called "study" mentioned that one of FRAM's filters wasn't all that bad.
Old 11-01-2004, 11:51 AM
  #33  
Supreme Member
 
Nate86's Avatar
 
Join Date: Jul 2003
Location: Pensacola, FL
Posts: 1,104
Likes: 0
Received 1 Like on 1 Post
Car: 1999 Saturn SL2
Engine: 4 cylinder
Transmission: 4-speed automatic
Originally posted by Benny
AC Delco are nice filters I use the 1218 which is the tall one, they make the short one also that fits our cars, I used to buy the AC filter at the dealer because they had the synthetic ones, I do not know if they make those anymore but they were nice. Maybe in the GM performance catalog. Anybody know?
My local AutoZone still sells the PF35L, if that is what you are referring to. Costs $9.99.
Old 11-01-2004, 12:04 PM
  #34  
Supreme Member

 
ME Leigh's Avatar
 
Join Date: Jan 2002
Location: Valley of the Sun
Posts: 3,852
Likes: 0
Received 0 Likes on 0 Posts
Car: 82 Z28
Engine: Al LT1 headed LG4 305
Transmission: TH350
Axle/Gears: 3.73 posi with spacer
You forgot the NAPA gold filter, it is one of the best if not the best and is resonably cheap. FWIW i run a Walmart filter so...
Old 11-01-2004, 01:32 PM
  #35  
SSC
Supreme Member

 
SSC's Avatar
 
Join Date: Jul 2001
Location: Pueblo Co
Posts: 3,974
Likes: 0
Received 0 Likes on 0 Posts
Car: No more birdy
Geeze antoher oldie thread.

My prefrence for cheap filters are Supertech. If I want to spend a few extra bucks I grab a 2quart PUROLATOR filter. Course that 2 quart dont quite fit on the bird anymore thanks to the headers.
Old 11-01-2004, 01:47 PM
  #36  
Supreme Member
 
Nate86's Avatar
 
Join Date: Jul 2003
Location: Pensacola, FL
Posts: 1,104
Likes: 0
Received 1 Like on 1 Post
Car: 1999 Saturn SL2
Engine: 4 cylinder
Transmission: 4-speed automatic


I need to start looking at the post dates before replying to threads.
Old 11-01-2004, 02:22 PM
  #37  
Senior Member

iTrader: (1)
 
Fire"Dutch"Bird's Avatar
 
Join Date: Aug 1999
Location: Northern part of The Netherlands
Posts: 873
Received 2 Likes on 2 Posts
Car: '88 Firebird Formula 350
Engine: 350 (5.7 TPI)
Transmission: auto 700R4
Axle/Gears: BW 9-bolt L.S.
AC Delco Ultraguard Gold UPF 1218 0n my Firebird,
part # 25322841 at any GM dealer OR....Pep Boys...!!!

Fram on my daily drivers, never ever any problems with Fram!!
Old 11-01-2004, 03:46 PM
  #38  
Member
iTrader: (1)
 
hoogabooga's Avatar
 
Join Date: Mar 2004
Location: mocksville nc
Posts: 404
Likes: 0
Received 0 Likes on 0 Posts
Car: '68 corvette '73 Corvette
Engine: 427 454
Transmission: TH400
fram on a 89 mazda i bought new. 236,928 miles later everything ok. castrol oil since first change.
Old 11-02-2004, 09:36 AM
  #39  
Supreme Member
 
grafx's Avatar
 
Join Date: Nov 2001
Location: So. California
Posts: 1,160
Likes: 0
Received 0 Likes on 0 Posts
Car: 91 Camaro RS
Engine: 305 TBI
Transmission: Pro-Built Automatic/Vigilante 2800
lol the classic threads never die!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GeneralIesrussi
Carburetors
5
01-20-2020 01:06 PM
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
Linson
Auto Detailing and Appearance
26
09-21-2015 01:08 PM
89 formula TPI
Tech / General Engine
10
09-07-2015 11:06 AM
Hotrodboba400
Firebirds for Sale
0
09-02-2015 07:28 PM



Quick Reply: Vote for best oil filter for the dollar!



All times are GMT -5. The time now is 03:01 PM.