Engine Shop prices, are these good?
#1
Member
Thread Starter
Join Date: Dec 1999
Location: Cincinnati, Ohio 45215
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Engine Shop prices, are these good?
I got a quote to have some work done on my 87 L98 block, here are the prices they gave me, is this too expensive?
Heads:
Hot Tank: 45
Replace press in studs w/ screw in studs: 175
Machine Valve Guides for high-lift cam: 50
Paint Gloss Black: 25
Block:
Hot Tank: 50
Bore .030 over: 175
Install Cam Bearings: 25
Paint Gloss Black: 25
Rods:
Re-condition: 80
Press Piston Pins In: 50
Crank:
Magnaflux: 25
Polish: 25
Turn .010 under if needed: 35
Balance: 150
Total: $935
------------------
1987 Formula 350, headman hedders, Accel supercoil, cap, rotor.
MAF screens removed. 160 degree stat and manual fan switch.
Best ET: 14.745@91.317mph-Stock
Best ET: 14.418@95.51 mph-Modded
Ridiculed Founder of the Traction Impaired Crew
Heads:
Hot Tank: 45
Replace press in studs w/ screw in studs: 175
Machine Valve Guides for high-lift cam: 50
Paint Gloss Black: 25
Block:
Hot Tank: 50
Bore .030 over: 175
Install Cam Bearings: 25
Paint Gloss Black: 25
Rods:
Re-condition: 80
Press Piston Pins In: 50
Crank:
Magnaflux: 25
Polish: 25
Turn .010 under if needed: 35
Balance: 150
Total: $935
------------------
1987 Formula 350, headman hedders, Accel supercoil, cap, rotor.
MAF screens removed. 160 degree stat and manual fan switch.
Best ET: 14.745@91.317mph-Stock
Best ET: 14.418@95.51 mph-Modded
Ridiculed Founder of the Traction Impaired Crew
#4
TGO Supporter
cost 65 here to bore a block. i machine and do my own studs, didn't know it cost so much.
------------------
ICON Motorsports
1st & 3rd
------------------
ICON Motorsports
1st & 3rd
Thread
Thread Starter
Forum
Replies
Last Post
Zachattack0925
Tech / General Engine
2
08-12-2015 09:54 PM
Zachattack0925
Transmissions and Drivetrain
4
08-12-2015 09:52 PM