Timing
08-26-2004, 10:22 PM
#1
Member
Thread Starter
Join Date: Dec 2003
Location: BC Canada
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 pontiac trans am
Engine: 350 with carb and headers
Transmission: borg warner 5speed
Timing
its a pretty stock set up here. carbed 305, manual transmission.
what should i set my timing to?
I set it to 8, but when i plug the vacume advance in, it idles at like 2000 and wont go down. so im thinking 8 is probably a little too advanced.
can someone who knows please tell me? thanks.
what should i set my timing to?
I set it to 8, but when i plug the vacume advance in, it idles at like 2000 and wont go down. so im thinking 8 is probably a little too advanced.
can someone who knows please tell me? thanks.
08-27-2004, 06:26 AM
#2
Supreme Member
Join Date: Jul 1999
Location: Loveland, OH, US
Posts: 18,457
Likes: 0
Received 15 Likes
on
15 Posts
Car: 4
Engine: 6
Transmission: 5
Sounds like you're plugging the vac advance into the wrong place. There shouldn't be any vacuum on its port at idle, so plugging it in at idle isn't supposed to make any difference.
8° should be fine. Assuming of course that your timing marks are accurate.
8° should be fine. Assuming of course that your timing marks are accurate.
08-27-2004, 06:03 PM
#3
Member
Thread Starter
Join Date: Dec 2003
Location: BC Canada
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 pontiac trans am
Engine: 350 with carb and headers
Transmission: borg warner 5speed
ummm. well can anyone tell me where to plug my vacume advance from? i got it going from the back of the carb, on the drivers side of it. Im not exactly sure if its right.
does anybody have a pic of it?
does anybody have a pic of it?
Thread
Thread Starter
Forum
Replies
Last Post