brharris27370

Where is the wire to disconnect so you can set the Timing. I just put a new motor in my wifes car and don't know where this blasted wire is so I can set the timing. I have adjusted it the best I can with a timing light but I am still way too far off because the exhaust starts to glow after about 5 mins. The cat is gutted so I know its not clogged. It has all new injectors so I can't imagine that would be the problem. So please help me set the timing properly.

Vader

BR,

I'm not certain on the 2.8, but the 151 doesn't have a bypass connector - the ALDL diagnostic pins are shorted to force a base timing mode. Your might be similar.

------------------
Later,
Vader
------------------
"Fear is how I fall, Confusing what is real..."
Adobe Acrobat Reader

ede

little more info on year might help. i found the info in a manual the only time i worked on a fiero. like vader said i had to jump the ALDL.

------------------
ICON Motorsports

1st & 3rd
MM Black Diamond 538 F&AM

brharris27370

86 2.8L MPI (which all the V6 Fieros had). Jump the AB pins on the ALDL connector or other pins.

------------------
91 Camaro RS 5.0L Black Convertible 700R4
** Added so far **
*GM Wonderbar
*Alston SFC
*Turbo City Inj Spacer
*Dual Snorker Air Filter
Please Visit www.bnhtoys.com and www.bharris.org