Crane Gold 7/16 rockers & centerbolt covers
04-19-2006, 06:18 PM
#1
Supreme Member
Thread Starter
Join Date: Jan 2001
Location: Rock Hill, SC
Posts: 1,411
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1999 Pontiac T/A Firehawk
Engine: ***'s Engine
Transmission: T56
Crane Gold 7/16 rockers & centerbolt covers
Does anyone know if Crane's Gold full roller rockers sized for 7/16" stud fit under the stock L98 centerbolt covers? I have a set of Iron Lightning heads with 7/16" studs, guideplates, hardened pushrods, etc and I want to use the stock L98 covers.
I've seen several people say they fit, but it looks like they were mostly 3/8" stud applications. I'm looking at part #s 11752 (1.5 ratio) and 11755 (1.6 ratio).
I've seen several people say they fit, but it looks like they were mostly 3/8" stud applications. I'm looking at part #s 11752 (1.5 ratio) and 11755 (1.6 ratio).
04-19-2006, 08:39 PM
#2
Supreme Member
iTrader: (2)
Join Date: Feb 2006
Location: 39.84N 105.11W
Posts: 1,547
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Trans Am GTA
Engine: WAS 350 - now L92 (alum. 378/6.2L)
Transmission: WAS 700R4, now a built T56
Axle/Gears: 3.27 9-bolt
I think that if you can find a self-aligning, narrow-body set*, you'll probably be OK - but that's probably the next mod I'll be doing, so I'll be paying attention to this thread as well...
* Of course, I've been looking (not too hard) for a set that's:
* steel;
* 1.5 ratio;
* self-aligning;
* narrow-body; &
* full-roller
& haven't been able to find one yet, so if you do, let me know!
* Of course, I've been looking (not too hard) for a set that's:
* steel;
* 1.5 ratio;
* self-aligning;
* narrow-body; &
* full-roller
& haven't been able to find one yet, so if you do, let me know!
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
2
09-28-2015 12:35 AM
gta892000
Cooling
6
09-16-2015 12:37 AM