serp belt length
#1
Member
Thread Starter
Join Date: Jan 2002
Location: NH
Posts: 253
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1989 Formula 350
Engine: Stealth Rammed 350
Transmission: 700R4
Axle/Gears: 3.45 9 bolt
serp belt length
alrighty guys im sure this has been posted somewhere else but i couldnt find it. but here we go. Ive got an 88 Serp setup with all the acsessories. i have no need for the air pump to be there so i wanna get rid of it. has anyone done this and if you have can you tell me which belt you used to make up for the difference in it not being there? i figure its gonna have to be about 3 to 4 inches shorter but im not sure. thanx in advance guys.
#2
Junior Member
Join Date: Nov 2003
Location: Augusta, GA
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 RS 25th Anniv
Engine: 305, V8, 5.0
Transmission: auto aka 700R4
Axle/Gears: 3.73 rwd
Originally Posted by F-Bobby
alrighty guys im sure this has been posted somewhere else but i couldnt find it. but here we go. Ive got an 88 Serp setup with all the acsessories. i have no need for the air pump to be there so i wanna get rid of it. has anyone done this and if you have can you tell me which belt you used to make up for the difference in it not being there? i figure its gonna have to be about 3 to 4 inches shorter but im not sure. thanx in advance guys.
if u read the article it says that there are underdrive pulleys installed.
#3
Supreme Member
iTrader: (2)
Join Date: Jul 2004
Location: Miami
Posts: 1,678
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: L03
Transmission: 700R4
Axle/Gears: Stock
"You will however need a longer belt, I used Dayco 968K6 belt. It is basically a 96.8" 6 rib belt. All parts stores stock just about every length of belt in every width. They should be able to find it using these numbers."
That's the quote from the article. I used that belt when I removed the smog pump and it worked fine with my stock pulleys.
The second diagram in that picture is the routing you should follow.
That's the quote from the article. I used that belt when I removed the smog pump and it worked fine with my stock pulleys.
The second diagram in that picture is the routing you should follow.
Thread
Thread Starter
Forum
Replies
Last Post
2012sergen11
Engine/Drivetrain/Suspension Wanted
6
10-13-2015 07:38 PM