Need help on stock L96 Valve sizes.
12-03-2006, 06:23 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2005
Location: California, Sacrameto
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 gta
Engine: 350 tpi
Transmission: 700r4
Need help on stock L96 Valve sizes.
Looking at new valves, and just need to know the specifics on them without pulling them. Size, length, and diameter. Also anything else I am missing. They are for the stock iron heads. 1988 GTA. Thanks for the help.
12-03-2006, 10:46 PM
#3
Supreme Member
iTrader: (1)
Join Date: Jul 2004
Location: Calgary, AB, Canada
Posts: 10,763
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1982 Trans-Am
Engine: 355 w/ ported 416s
Transmission: T10, hurst shifter
Axle/Gears: 10 bolt, true-trac, 3.73
What's L96?
If it's the stock motor in an '88 GTA, with a 350, it should have 1.94/1.5" valves in 083 heads I think.
If it's the stock motor in an '88 GTA, with a 350, it should have 1.94/1.5" valves in 083 heads I think.
12-04-2006, 06:21 AM
#4
Supreme Member
Woops! My mistake. My brain read the post as "L69", the 305 HO carbureted motor. Yeah, 1.94/1.50 valve size for an L98 350 TPI motor. Everything else the same.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
1988iroc350tpi
Tech / General Engine
8
08-14-2015 07:52 PM
