Steering wheel/Ignition/Cruise control Wiring help!
12-01-2010, 05:17 PM
#1
Member
Thread Starter
Join Date: Sep 2010
Location: Phx, AZ
Posts: 187
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Trans Am
Engine: 350 carb'd
Transmission: 700R4
Axle/Gears: Stock
Steering wheel/Ignition/Cruise control Wiring help!
Im swaping out my old steering column, mine originally had cruise control, but the replacement doesnt. There is what looks to be a vacuum hose? going from the firewall to a circuit attached to my brake pedal. Im assuming this is the release for the cruise control. But again, my replacement doesnt have cruise, is there a way to take that line off? and what do all these wires go to?
12-01-2010, 05:22 PM
#2
Member
Thread Starter
Join Date: Sep 2010
Location: Phx, AZ
Posts: 187
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Trans Am
Engine: 350 carb'd
Transmission: 700R4
Axle/Gears: Stock
Re: Steering wheel/Ignition/Cruise control Wiring help!
What does that metal rod do? and i witched the ignition switch from my old one to my new one, because i didnt have a key to the replacement. Will that still work? Thanks -Matt
12-03-2010, 03:09 PM
#4
Member
Thread Starter
Join Date: Sep 2010
Location: Phx, AZ
Posts: 187
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Trans Am
Engine: 350 carb'd
Transmission: 700R4
Axle/Gears: Stock
Re: Steering wheel/Ignition/Cruise control Wiring help!
I could really use some help, i need this car for work. and now when i turn the key the lights dont come on until the key is turned all the way, and the car doesnt crank or anything. i think theres something wrong with either the wiring or the ignition cylinder was installed wrong. when putting the lock plate back on in the steerring wheel, does it matter how it is put back on?
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
15
12-29-2023 08:23 AM
eightsixseven
Tech / General Engine
1
08-14-2015 03:09 PM