EGR Replacement and inatallation?
04-09-2011, 04:10 AM
#1
Member
Thread Starter
Join Date: Sep 2010
Location: Phx, AZ
Posts: 187
Likes: 0
Received 1 Like
on
1 Post
Car: 87 Trans Am
Engine: 350 carb'd
Transmission: 700R4
Axle/Gears: Stock
EGR Replacement and inatallation?
What's up everyone, got another problem on my hands. I recently moved to a small town so I know longer have to pass emissions, wich is great. But before I moved a guy at a shop said my egr was bad and needed to be replaced, wich was causing my car to stall and have a rough idle. I'm getting paid on Thursday and was planning on buying a replacement egr, but the guy at the shop said I had to get one from the dealership because an aftermarket/autozone one wouldn't have the electrical connector? Im not sure if that's true or not but I was wondering, how difficult is it to replace and do I have to get one from the dealership? I don't even think there IS a GM Dealer in this small town. Thanks guys
-matt
-matt
04-09-2011, 05:02 AM
#2
Supreme Member
iTrader: (5)
Join Date: Nov 2010
Location: Mantua NJ
Posts: 5,827
Received 64 Likes
on
57 Posts
Car: 1 Owner 1986 TA with a WS6 package
Engine: 5.0 EFI
Transmission: THM700R4
Axle/Gears: 277 Posi Speedo
Re: EGR Replacement and inatallation?
You can take the wire from your old one and reuse it on the new one,you can get one at Auto Zone or any parts replacement store.And as far as being difficult no.
Thread
Thread Starter
Forum
Replies
Last Post
mdtoren
Tech / General Engine
0
08-16-2015 05:45 PM
