Vacuum tube for Distributor
#1
Member
Thread Starter
Join Date: Apr 2011
Location: Adelaide
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Car: '84 Trans Am
Engine: 305
Transmission: Auto
Vacuum tube for Distributor
Hi all.
As I now have my new dizzy and the previous one was a CC unit. What can I use for the vacuum tube? I also need to find a spot to connect it to (I might have the connection on the carby though).
Cheers.
Jonno.
As I now have my new dizzy and the previous one was a CC unit. What can I use for the vacuum tube? I also need to find a spot to connect it to (I might have the connection on the carby though).
Cheers.
Jonno.
#2
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,157
Received 1,696 Likes
on
1,289 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Vacuum tube for Distributor
If you have the connection on the carb, try it.
Also try hooking it up straight to manifold vacuum.
See which you like better and run with it.
Also try hooking it up straight to manifold vacuum.
See which you like better and run with it.
#3
Member
Thread Starter
Join Date: Apr 2011
Location: Adelaide
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Car: '84 Trans Am
Engine: 305
Transmission: Auto
Re: Vacuum tube for Distributor
Will do. What type of tubing is it though?
Is it just stuff similar to the washer nozzle stuff?
Is it just stuff similar to the washer nozzle stuff?
#4
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,157
Received 1,696 Likes
on
1,289 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Vacuum tube for Distributor
Yup, pretty much.
You can use that plastic stuff, or rubber hose, or even metal tube like they used to in the 60s; doesn't make the slightest difference.
You can use that plastic stuff, or rubber hose, or even metal tube like they used to in the 60s; doesn't make the slightest difference.
#5
Moderator
Join Date: Jan 2000
Location: Mercedes Norte, Heredia, Costa Rica
Posts: 20,981
Likes: 0
Received 9 Likes
on
8 Posts
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: Vacuum tube for Distributor
Ask for vacuum hose at the parts store. If they give you a blank look, ask for windshield washer hose instead.
#6
Supreme Member
Join Date: Jun 2005
Location: Sydney, Australia
Posts: 1,380
Likes: 0
Received 5 Likes
on
5 Posts
Car: '86 TA
Engine: '74 350
Transmission: 700r4
Axle/Gears: 2.77
Re: Vacuum tube for Distributor
dj - Supercheap sells it by the metre or in 2M packs. Rubber hose, about 4mm would do iirc.
Thread
Thread Starter
Forum
Replies
Last Post
86CamaroDan
Engine/Drivetrain/Suspension Parts for Sale
2
09-29-2015 10:08 PM