Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!

305 Rough Idle, can't set timing

Thread Tools
 
Search this Thread
 
Old 10-29-2021, 08:43 PM
  #1  
Junior Member
Thread Starter
 
Mr.Sir's Avatar
 
Join Date: Oct 2021
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
305 Rough Idle, can't set timing

Need some help. I have an 89 305 with TBI. I've had a rough idle problem I've been trying to fix. I decided to check the timing. So when I disconnect the est wire, the car won't idle. it will start surging from 1500 rpm and catch itself just before stalling. It does that on repeat. Pretty sure it should be steady even with thag wire disconnected. With the est wire connected, car runs and drives fine other than the rough idle.

Don't know what can be causing that. Car has new cap,rotor, plugs and wires. Also changed o2 sensor.

Any ideas? Thanks.
Old 10-31-2021, 01:58 PM
  #2  
Supreme Member

iTrader: (9)
 
84 1LE's Avatar
 
Join Date: Nov 2002
Location: Oyth
Posts: 6,230
Received 329 Likes on 270 Posts
Car: 89RS vert
Engine: Erod
Transmission: 4L65e
Axle/Gears: BW, 3.27
Re: 305 Rough Idle, can't set timing

Have you tried keeping your foot on it, till it normalizes the idle? I used to have to do that with my 84. After some seconds it would idle normal, but it was carbureted. Worth a try.
Old 11-01-2021, 07:33 AM
  #3  
Supreme Member

iTrader: (9)
 
BOTTLEDZ28's Avatar
 
Join Date: Sep 1999
Location: Mass
Posts: 3,871
Received 24 Likes on 14 Posts
Engine: 350 TPI
Transmission: A4
Axle/Gears: 3.23
Re: 305 Rough Idle, can't set timing

Did you check the wear on the distributor gear?
Old 11-11-2021, 02:48 PM
  #4  
Junior Member
 
Scott's 83' Z's Avatar
 
Join Date: Feb 2020
Location: Bloomington mn
Posts: 53
Received 21 Likes on 15 Posts
Car: 1983 Z28
Engine: L69
Transmission: T5
Axle/Gears: 3.73
Re: 305 Rough Idle, can't set timing

Any vacuum leaks??
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RazorN8
Carburetors
12
12-06-2009 06:08 PM
metalic5
TPI
3
12-06-2003 10:53 PM
88TAJeff
TPI
7
11-29-2002 09:29 PM
Keith5
TBI
6
06-06-2001 06:49 PM



Quick Reply: 305 Rough Idle, can't set timing



All times are GMT -5. The time now is 07:36 AM.