Raced an LS1 vette, Twice
#1
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
Raced an LS1 vette, three times *
I raced my buddies LS1 vette tonight. The car show going on had some legal "street racing" setup, with a flagger and everything.
First run we pull up to the line, i clean off my tires with a brief burnout and got the crowd goin. I spun 1st, pedaled it then hit 2nd. He spun 1st , then hooked. I held him off by about 1.5 cars till around 85ish when we shut down. i honestly couldn't beleive it.
2nd run we pull up, crowd was pumped...camaro vs. vette rematch. I figured i was gonna loose. I didn't get to burnout on this one. I stalled it to 2000, spun a bit, got back into it...it hooked then started spinning again and got sideways...hit 2nd gear and held him off behind me by about 2 cars or so. He dead hooked on this run.
Needless to say he was VERY impressed. He is a good driver and has run the car to 13.3's at the strip.
I cant wait to get to the track again, hoping for 12.9xx when i put in the 3.42's that i just picked up. I'm still on the 2.73s right now.
First run we pull up to the line, i clean off my tires with a brief burnout and got the crowd goin. I spun 1st, pedaled it then hit 2nd. He spun 1st , then hooked. I held him off by about 1.5 cars till around 85ish when we shut down. i honestly couldn't beleive it.
2nd run we pull up, crowd was pumped...camaro vs. vette rematch. I figured i was gonna loose. I didn't get to burnout on this one. I stalled it to 2000, spun a bit, got back into it...it hooked then started spinning again and got sideways...hit 2nd gear and held him off behind me by about 2 cars or so. He dead hooked on this run.
Needless to say he was VERY impressed. He is a good driver and has run the car to 13.3's at the strip.
I cant wait to get to the track again, hoping for 12.9xx when i put in the 3.42's that i just picked up. I'm still on the 2.73s right now.
Last edited by TunedPort 335; 07-24-2005 at 07:47 PM.
#2
Senior Member
iTrader: (2)
Join Date: Jan 2005
Location: North Carolina!
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: 406 sbc with Trick Flow heads, Hook
Transmission: Pro built 700R4
Axle/Gears: waiting on a new rear!!!!
Dude I'm like seriously jealous of you car right now!
I wonder if my 327 can perform like that, I'm still waiting on my tranny. Hey, btw what size injectors do you have?
I wonder if my 327 can perform like that, I'm still waiting on my tranny. Hey, btw what size injectors do you have?
#4
Senior Member
iTrader: (2)
Join Date: Jan 2005
Location: North Carolina!
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: 406 sbc with Trick Flow heads, Hook
Transmission: Pro built 700R4
Axle/Gears: waiting on a new rear!!!!
Dude I'm like seriously jealous of you car right now!
I wonder if my 327 can perform like that, I'm still waiting on my tranny. Hey, btw what size injectors do you have?
I wonder if my 327 can perform like that, I'm still waiting on my tranny. Hey, btw what size injectors do you have?
#5
Supreme Member
Join Date: Sep 2001
Location: Cincinnati, OH
Posts: 2,031
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Iroc Z
Engine: 383ci.
Transmission: WC-T5
An LS1(LS6) vette will easily trap in the 100's mph in the 1/4. And you dont' so I'm throwing up a huge until you can explain what year this vette was. Cause your saying you spun, and he hooked both times?
#6
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
Originally posted by Cruz'N Bruz'R
An LS1(LS6) vette will easily trap in the 100's mph in the 1/4. And you dont' so I'm throwing up a huge until you can explain what year this vette was. Cause your saying you spun, and he hooked both times?
An LS1(LS6) vette will easily trap in the 100's mph in the 1/4. And you dont' so I'm throwing up a huge until you can explain what year this vette was. Cause your saying you spun, and he hooked both times?
I have done a couple things since last year, and the car runs much better. There were thousands of people watching. What do ya want me to tell ya?
PS look at my 1/8th mile time and tell me if a stock vette comes close to that. i'm sure he'd reel me in once he hits 3rd and 4th gear. trap speed dont mean squat to me, its all about who gets there first
Last edited by TunedPort 335; 07-24-2005 at 08:05 AM.
#7
Supreme Member
Join Date: Sep 2001
Location: Cincinnati, OH
Posts: 2,031
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Iroc Z
Engine: 383ci.
Transmission: WC-T5
Fair enough, you've rid me of doubt.
Thats one hardcore LB9 you have there then.
Plus I wasn't sure if you were at altitude or not.
I know around here the C5's trap well into the 100's, but they pull up top, and are dogs froma dig, thanks to their IRS.
Thats one hardcore LB9 you have there then.
Plus I wasn't sure if you were at altitude or not.
I know around here the C5's trap well into the 100's, but they pull up top, and are dogs froma dig, thanks to their IRS.
Trending Topics
#8
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
Originally posted by Cruz'N Bruz'R
Fair enough, you've rid me of doubt.
Thats one hardcore LB9 you have there then.
Plus I wasn't sure if you were at altitude or not.
I know around here the C5's trap well into the 100's, but they pull up top, and are dogs froma dig, thanks to their IRS.
Fair enough, you've rid me of doubt.
Thats one hardcore LB9 you have there then.
Plus I wasn't sure if you were at altitude or not.
I know around here the C5's trap well into the 100's, but they pull up top, and are dogs froma dig, thanks to their IRS.
I wouldn't wanna race him from a roll. I'd get spanked. But it was fun none the less and it was a fair race. I had a blast
#9
Junior Member
Join Date: Oct 2002
Location: Ohio
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Iroc
Engine: L9-to small
Transmission: 6 spd
Nice! Your car is set up pretty good for a race out of the hole...1.7 60' is awesome..you would beat me in the 1/8 and my cars best is 12.8 110mph in the 1/4 with a 2.1 60'...on the street to 80mph the start is HHHUUUUGGGGEEEEE.
350Z
350Z
Last edited by POS350Z; 07-24-2005 at 12:04 PM.
#11
Member
Join Date: Feb 2005
Location: Seattle, WA
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2001 Camaro SS
Engine: LS1
Transmission: T56
i like what youve done with your car, if i saw who shot your car with the bb gun i would find them, put them in the trunk of a car, and do some off roading . check out my car when u get the chance on the cardomain site...its in the sig, and nice job i wana kill a vette some day
#12
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
I raced him again today. This time we both spun outta the whole, and we both were pedaling it. I had him by about a fender till 50mph. He hit 2nd gear and pulled a half car on me. Shut down at around 85mph. He beat me by about .5 to 3/4 of a car.
Fun race heres a pic! You can see i'm spinning a bit here
Fun race heres a pic! You can see i'm spinning a bit here
Last edited by TunedPort 335; 07-24-2005 at 07:40 PM.
#14
Member
Join Date: Feb 2005
Location: Seattle, WA
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2001 Camaro SS
Engine: LS1
Transmission: T56
dude thats bad ***...where is that and how come theres like a thousand people watching?!?!!??!?! where is this i wana come!!! i like ur car dude its sick
#15
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
It's in downtown Worcester MA (second largest city in the state). Its called the Spirit of America hot rod & bike weekend. We set up organized drag racing and burnout contests, then there were the bike stunts of course.
Everyone is cruising around open headers, cops dont care...awesome time.
Here's my friend in his 10 sec chevelle puttin a hurtin on a thirdgen.
Everyone is cruising around open headers, cops dont care...awesome time.
Here's my friend in his 10 sec chevelle puttin a hurtin on a thirdgen.
#16
Member
Join Date: Feb 2005
Location: Seattle, WA
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2001 Camaro SS
Engine: LS1
Transmission: T56
dammmmmmmmmn i wish seattle had something like that thats sick! i bet its ton of fun. have u dynoed your car? how much est. HP do u have to the rear?? any idea
#17
Supreme Member
iTrader: (1)
Join Date: Mar 2004
Location: Pittsburgh & Allentown PA
Posts: 1,319
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 Z28 (Heritage Edition)
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 2.73 Posi
Thats freakin crazy. First of all i gotta say good race...its impressive to see a 3rd gen keep up with, and beat a newer vette. Gives guys like me with a LO3 some street cred...hahahahahaha.
But seriously i would love to drag race down the street, legally, in front of thousands of people like that. That must be insane!!
But seriously i would love to drag race down the street, legally, in front of thousands of people like that. That must be insane!!
#18
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
Originally posted by Sidewayz28
dammmmmmmmmn i wish seattle had something like that thats sick! i bet its ton of fun. have u dynoed your car? how much est. HP do u have to the rear?? any idea
dammmmmmmmmn i wish seattle had something like that thats sick! i bet its ton of fun. have u dynoed your car? how much est. HP do u have to the rear?? any idea
Right now i'd say im in the area of 260rwhp/365rwtq
#20
Supporter/Moderator
iTrader: (7)
Join Date: Feb 2001
Location: Cincinnati, OH
Posts: 13,247
Likes: 0
Received 392 Likes
on
299 Posts
Car: '90 RS
Engine: 377 LSX
Transmission: Magnum T56
It sounds like you really know how to launch your car. He should have beat you but you simply out drove him. Good job
#22
Senior Member
iTrader: (2)
Join Date: Jan 2005
Location: North Carolina!
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: 406 sbc with Trick Flow heads, Hook
Transmission: Pro built 700R4
Axle/Gears: waiting on a new rear!!!!
... and then some, believe me.
Stop your making me blush! Did you own a 327? Please tell me about it.
TP355 That stock Tpi is making some killer torque!
Do you think if you upgraded the intake it will run faster?
Or is the way your engine is made best suited for the stock intake? I wonder.
TP355 That stock Tpi is making some killer torque!
Do you think if you upgraded the intake it will run faster?
Or is the way your engine is made best suited for the stock intake? I wonder.
#23
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
Re: ... and then some, believe me.
Originally posted by lilbowilson
Stop your making me blush! Did you own a 327? Please tell me about it.
TP355 That stock Tpi is making some killer torque!
Do you think if you upgraded the intake it will run faster?
Or is the way your engine is made best suited for the stock intake? I wonder.
Stop your making me blush! Did you own a 327? Please tell me about it.
TP355 That stock Tpi is making some killer torque!
Do you think if you upgraded the intake it will run faster?
Or is the way your engine is made best suited for the stock intake? I wonder.
#24
Senior Member
Join Date: Mar 2004
Location: Clearfield,Utah
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC, 1989 IROC
Engine: built 305, stock 305 tpi
Transmission: Corvette 700r4, t-5
Axle/Gears: 4.10 posi, 3.08 posi
thats crazy you're running that fast with stock intake and injectors! what heads are you using? and why arn't you switching to an after market intake?
#25
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
Originally posted by phoenix305
thats crazy you're running that fast with stock intake and injectors! what heads are you using? and why arn't you switching to an after market intake?
thats crazy you're running that fast with stock intake and injectors! what heads are you using? and why arn't you switching to an after market intake?
I'm keeping this intake cause the car runs fine for now, and is quick, and its my daily driver. I can't afford the downtime. Plus, i'm afraid if i switch to a different intake that its gonna run like crap like all the other ones i've seen.
#26
Supreme Member
iTrader: (16)
Re: ... and then some, believe me.
Originally posted by lilbowilson.Stop your making me blush! Did you own a 327? Please tell me about it.
He had an Iroc with an Olds 425 shoe-horned in it, another Z28 with a 396 Chevy, a Firebird with a 302 Chevy (and some other's that retained the original engine, but were worked). I have to admit, the Iroc with the 425 Olds was my favorite (it was the first time I was in a ten second car, and that's something you never forget)....
Anyways, the Firebird with the 327 (albeit with a 283 crank, equaling 302 cubic inches), was a terror on the freaking street. He ran that sucka with fuel injection first (the car came stock with an LB9 & five speed), carburetion afterward, then back again with fuel injection. Before he got rid of it, it was running a Super-Ram... and it raped many LT1 vette's on the street, that were running in the mid- high 12's at the track.
#27
Supreme Member
iTrader: (20)
nice job! your car runs very quick for that trap speed. i think i can get down there if i had some slicks or DR's. but i love handling too so i need the street tire. LOL
yeah TPI is killer on the 1/8 mile if you get it to hook up. vettes arent drag cars, and cant hook well. i held off a C6 hard top till 1000feet where he put about 1-1.5 cars on me at the end of the 1/4mile. beat me by a hundreth second or so, but trapped 8mph more than me LOL
yeah TPI is killer on the 1/8 mile if you get it to hook up. vettes arent drag cars, and cant hook well. i held off a C6 hard top till 1000feet where he put about 1-1.5 cars on me at the end of the 1/4mile. beat me by a hundreth second or so, but trapped 8mph more than me LOL
#28
Junior Member
Join Date: Oct 2003
Location: Stafford, virginia
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1994 25th Anniversary Trans Am
Engine: Lt1
Transmission: A4
Your 60' and 1/8 times are incredible. How did you manage to find the right setup to pull those short times? I run the same mph in the 1/8 as you but I'm .5 slower :-( This being in the t/a of course.
#30
Supreme Member
Thread Starter
Join Date: Jan 2003
Location: Paxton, MA
Posts: 1,786
Likes: 0
Received 1 Like
on
1 Post
Car: 1987 Camaro Z28
Engine: 335 TPI Stroker
Transmission: Tremec TKO 500
Axle/Gears: 10 bolt / 3.42
Originally posted by cas0484
Your 60' and 1/8 times are incredible. How did you manage to find the right setup to pull those short times? I run the same mph in the 1/8 as you but I'm .5 slower :-( This being in the t/a of course.
Your 60' and 1/8 times are incredible. How did you manage to find the right setup to pull those short times? I run the same mph in the 1/8 as you but I'm .5 slower :-( This being in the t/a of course.
I have since installed a set of Lakewood lower control arms with poly bushings, but havent' been to the track yet.
Thanks guys
#31
Senior Member
iTrader: (2)
Join Date: Jan 2005
Location: North Carolina!
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC
Engine: 406 sbc with Trick Flow heads, Hook
Transmission: Pro built 700R4
Axle/Gears: waiting on a new rear!!!!
OH YEAH! 335
I would be afraid to change intakes also TunePort 335. You know what they say if it ain't broke don't fix it!
Thanks for the story Street Lethal
Man I can't wait to get my tranny, the one thats in the car now won't go to thrid gear so I can't try the car out until I get my new one. But I must say my car sounds KILLER!
I would be afraid to change intakes also TunePort 335. You know what they say if it ain't broke don't fix it!
Thanks for the story Street Lethal
Man I can't wait to get my tranny, the one thats in the car now won't go to thrid gear so I can't try the car out until I get my new one. But I must say my car sounds KILLER!
Thread
Thread Starter
Forum
Replies
Last Post