Eaton Posi Parts??
09-04-2006, 04:07 PM
#1
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Ottawa
Posts: 892
Likes: 0
Received 1 Like
on
1 Post
Car: 91Z
Engine: 355/afr/sr/lpe219
Transmission: built 700R
Eaton Posi Parts??
Hey guys, My posi is TOAST!! Does anybody know where I can get parts for this thing? I really hope I don't need to buy the whole thing from Summit for $500.00+!! Is there anyplace in Ottawa I can get a complete one even? Mabey Malmberg? I called the dealer and the parts are discontinued, ****in figures, why would we ever need parts for a 10 bolt. Any help would be great guys. Neil, mabey you could help?
Thanks,
Cory
Thanks,
Cory
09-04-2006, 08:06 PM
#4
Senior Member
Join Date: Oct 2001
Location: Ottawa, Ontario
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
You can get the rebuild parts you need at Malmbergs
Talk to "Dan" at Malmbergs "Powertrain" ........number starts with 521-XXXX as there are 3 locations here in Ottawa.
He'll fix you up, tell him your a friend of Carm's
-Carm
Talk to "Dan" at Malmbergs "Powertrain" ........number starts with 521-XXXX as there are 3 locations here in Ottawa.
He'll fix you up, tell him your a friend of Carm's
-Carm
09-04-2006, 08:19 PM
#5
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Ottawa
Posts: 892
Likes: 0
Received 1 Like
on
1 Post
Car: 91Z
Engine: 355/afr/sr/lpe219
Transmission: built 700R
Great, I will call him in the morning! Hey Carm, I heard you had a date with a dyno at KVR, I will let you tell the #'s but dam man, you are putting out some modified deisel TQ #'s man!! Very Impressive!
09-04-2006, 08:25 PM
#6
Supreme Member
Join Date: Feb 2000
Location: Kemptville, Ontario, Canada
Posts: 3,145
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 Z28
Engine: 355
Transmission: 700R4
Hey guys, My posi is TOAST!! Does anybody know where I can get parts for this thing? I really hope I don't need to buy the whole thing from Summit for $500.00+!! Is there anyplace in Ottawa I can get a complete one even? Mabey Malmberg? I called the dealer and the parts are discontinued, ****in figures, why would we ever need parts for a 10 bolt. Any help would be great guys. Neil, mabey you could help?
Thanks,
Cory
Thanks,
Cory
09-05-2006, 12:23 AM
#7
Senior Member
Join Date: Oct 2001
Location: Ottawa, Ontario
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
hey thx.....but i think the hp & tq numbers were wrong personally....my converter screws with them i dont believe them.
10psi it said 570 RWHP & 803 RWTQ......
10psi it said 570 RWHP & 803 RWTQ......
Trending Topics
09-05-2006, 08:18 AM
#9
Senior Member
Thread Starter
Join Date: Jan 2003
Location: Ottawa
Posts: 892
Likes: 0
Received 1 Like
on
1 Post
Car: 91Z
Engine: 355/afr/sr/lpe219
Transmission: built 700R
Ya I have heard many times the coverter juggling dyno #'s up, I am guessing the track will tell the tale! Edwin at KVR is a really good guy, but his knowledge in RWD and even setting up the dyno for them falls kinda short sometimes. I could see the TQ being too high due to the converter and the steep rear gear bringing down th HP #'s. On top of all that, the dyno they have reads quite a bit lower than others, so I have heard. Go run it at tapp and you will see a big diff. His dyno is known for inflated #'s.
Holy ****, that is just sick! Was that in your sig yesterday?? If it was I totally missed it!!lol
09-06-2006, 05:57 PM
#12
Senior Member
Join Date: Oct 2001
Location: Ottawa, Ontario
Posts: 607
Likes: 0
Received 0 Likes
on
0 Posts
Yup it was there before......going to MTL (Napierville Dragway) on Sunday to see what she's really got....RACE FUEL + more boost = 
.....i hope lol
.....i hope lol Last edited by Stroked-Z; 09-07-2006 at 08:41 PM.
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
11-14-2015 12:02 AM