TPI Tuned Port Injection discussion and questions. LB9 and L98 tech, porting, tuning, and bolt-on aftermarket products.
Sponsored by:
Sponsored by:

very disapointed?

Thread Tools
 
Search this Thread
 
Old 06-18-2002, 10:13 PM
  #1  
Member
Thread Starter
 
SMOKEN's Avatar
 
Join Date: Apr 2002
Location: SUDBURY
Posts: 119
Likes: 0
Received 0 Likes on 0 Posts
very disapointed?

i got beat by an 87 305 lg4 the mods done to that car were 350 tpi exhaust edelbrock intake and a holly 600 carb. my mods are 86 305 tpi hypertech chip k@n 8.8 mm airfoil no cat free flow muffler
anyone no what i should be running in the q mile i got the 3.42 gears thanks
Old 06-18-2002, 10:14 PM
  #2  
Member
Thread Starter
 
SMOKEN's Avatar
 
Join Date: Apr 2002
Location: SUDBURY
Posts: 119
Likes: 0
Received 0 Likes on 0 Posts
g tech time his 15.2 92mph
mine 15.7 93mph
Old 06-19-2002, 04:53 AM
  #3  
Senior Member
 
Blackened's Avatar
 
Join Date: Jan 2002
Posts: 661
Likes: 0
Received 1 Like on 1 Post
Ughh.. let's see... he has a 350 with a carb and you have a POS 305 with TBI. HMMMMMMMMMMMMMMMMMMMMMMMMMM, I wonder why you lost ?...
Old 06-19-2002, 07:02 AM
  #4  
Supreme Member
iTrader: (1)
 
Rob P's Avatar
 
Join Date: Jul 1999
Location: Key West, Florida!
Posts: 1,334
Likes: 0
Received 1 Like on 1 Post
Car: 89RSconvtZZ4TPI
Engine: ZZ4TPI
Transmission: 700R4 TRIPP TRANNY
Originally posted by Blackened
Ughh.. let's see... he has a 350 with a carb and you have a POS 305 with TBI. HMMMMMMMMMMMMMMMMMMMMMMMMMM, I wonder why you lost ?...
Ummm I think he clearly states 305tpi in his post
Old 06-19-2002, 10:44 AM
  #5  
Supreme Member

 
CraZ-28's Avatar
 
Join Date: Jan 2001
Location: Tucson, AZ
Posts: 1,746
Likes: 0
Received 0 Likes on 0 Posts
Car: 1991 Z-28
Engine: Can you say stroke?!?!
Transmission: 700-r4
Axle/Gears: 3.42
No, what he said is that HE has a tpi 305 and the other guy has 305 w/carb. Now let me see if I have this right, the other guy had manifolds from a tpi 350?

Also, you might want to put some comma's in there. Just by looking at it people MIGHT think your crazy saying you have a "hypertech chip k@n 8.8 mm airfoil no cat free flow muffler". That must be one bad *** muffler! Sorry but I just had to say that.

The only thing that I can think of is that he is running a little more free flowing than you. He's already modified his intake system so that brings up another question, what else has been modified that he is not telling you?
Old 06-19-2002, 10:08 PM
  #6  
Member

 
Scott 88 GTA's Avatar
 
Join Date: Jul 1999
Location: Stuarts Draft, VA
Posts: 407
Likes: 0
Received 0 Likes on 0 Posts
Car: 88 GTA
Engine: modified L98
Transmission: 700r4
Axle/Gears: 3.27 9-bolt
Originally posted by CraZ-28
Also, you might want to put some comma's in there. Just by looking at it people MIGHT think your crazy saying you have a "hypertech chip k@n 8.8 mm airfoil no cat free flow muffler". That must be one bad *** muffler! Sorry but I just had to say that.
ROTFLMAO!!!!!! Thanks, I needed a good laugh.
Old 06-20-2002, 12:03 AM
  #7  
Junior Member
 
egmonster's Avatar
 
Join Date: Feb 2002
Location: Yellowknife NT Canada
Posts: 73
Likes: 0
Received 0 Likes on 0 Posts
Seeing as how he ran near a 15 flat I'd assume he at least has a cam in there... Most LG4's were huge dogs and it was mostly because of the cam... certainly the TBI didn't help but still... Either that or he is hooking and you aren't... Not sure how reliable it is to compare G-tech vs G-tech, I assume you used the same one, if so, you were definately spinning and he wasn't judging by your traps and times. You should be running pretty close to him... But like I said he probably does have a cam..
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WillSpeedy
Aftermarket Vendor Review
3
09-16-2007 07:15 AM
JPrevost
DIY PROM
12
10-14-2004 10:03 AM
ChallengeR
Tech / General Engine
12
05-21-2004 06:45 PM
85pjcamaro
Theoretical and Street Racing
1
07-02-2002 07:25 AM



Quick Reply: very disapointed?



All times are GMT -5. The time now is 01:21 PM.