Fuel rail O-ring sizes???....
08-12-2004, 02:06 AM
#1
Supreme Member
Thread Starter
Join Date: Aug 1999
Location: Woodland Hills, CA USA
Posts: 2,842
Likes: 0
Received 0 Likes
on
0 Posts
Car: Yes...
Engine: Last time I checked...
Transmission: See "Engine"...
Fuel rail O-ring sizes???....
Anyone know what size the O-rings are for the fuel rail? Not the fuel injectors, but the actual tubes for the fuel rail.
The AP stores don't carry O-ring kits and it appears Fel-Pro only makes injector O-rings. I already have those.
I have a source for O-rings, I just need to know what the correct size is so I order the right ones.
TIA
The AP stores don't carry O-ring kits and it appears Fel-Pro only makes injector O-rings. I already have those.
I have a source for O-rings, I just need to know what the correct size is so I order the right ones.
TIA
08-12-2004, 01:03 PM
#2
Senior Member
Join Date: Feb 2003
Posts: 891
Likes: 0
Received 0 Likes
on
0 Posts
I don't know the size, but I'd just grab a few packs of the Help! o-rings. They have them in there. I know I used them for the fuel rail, as well as for the fuel filter. Get the "brown" ones, not the "black".
08-13-2004, 01:35 AM
#3
TGO Supporter
Join Date: Oct 2003
Location: ready room
Posts: 2,069
Likes: 0
Received 0 Likes
on
0 Posts
Car: NCC-1701-D (docked in AZ)
Engine: impulse drive
Transmission: fusion reactors
Axle/Gears: Rescued from the Borg by my crew
Re: Fuel rail O-ring sizes???....
Originally posted by BretD 88GTA
Anyone know what size the O-rings are for the fuel rail? Not the fuel injectors, but the actual tubes for the fuel rail.
The AP stores don't carry O-ring kits and it appears Fel-Pro only makes injector O-rings. I already have those.
I have a source for O-rings, I just need to know what the correct size is so I order the right ones.
TIA
Anyone know what size the O-rings are for the fuel rail? Not the fuel injectors, but the actual tubes for the fuel rail.
The AP stores don't carry O-ring kits and it appears Fel-Pro only makes injector O-rings. I already have those.
I have a source for O-rings, I just need to know what the correct size is so I order the right ones.
TIA
http://www.hotrodlane.cc/
08-17-2004, 06:45 AM
#4
Member
Fuel Rail O-ring sizes
Cross communication tubes: 2-110
Return line @ Regulator: 2-109
Stub aluminum tube between Regulator and Rail: 2-012
If you have a cold start injector there are two more o-rings where it plugs into the back of the driver side rail. I don't have one on my car but I can look up the sizes of them if you need.
I use 70 Durometer Viton o-rings to redress my rails.
Return line @ Regulator: 2-109
Stub aluminum tube between Regulator and Rail: 2-012
If you have a cold start injector there are two more o-rings where it plugs into the back of the driver side rail. I don't have one on my car but I can look up the sizes of them if you need.
I use 70 Durometer Viton o-rings to redress my rails.
Thread
Thread Starter
Forum
Replies
Last Post
toronto formula
Engine/Drivetrain/Suspension Parts for Sale
15
11-10-2015 06:17 AM
