Another Engine Combo Question
#1
TGO Supporter
Thread Starter
Join Date: Apr 2004
Posts: 509
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Z28
Engine: L98
Transmission: 700R4
Another Engine Combo Question
Any guesses as to what I might be looking at power wise or time wise?
88 IROC 305 TPI 700 R4 2600 stall converter 3.23 posi
Engine mods:
'83 305 block bored .020 over
260H Comp Cam
1.6 roller tipped rockers
World product 305 Torquer heads with 2.02/1.6 valves
TPI off of 88 Trans Am 305 car
Full length headers
I'm new to TPI so any suggestions would be appreciated
88 IROC 305 TPI 700 R4 2600 stall converter 3.23 posi
Engine mods:
'83 305 block bored .020 over
260H Comp Cam
1.6 roller tipped rockers
World product 305 Torquer heads with 2.02/1.6 valves
TPI off of 88 Trans Am 305 car
Full length headers
I'm new to TPI so any suggestions would be appreciated
#3
Supreme Member
Join Date: Oct 2001
Location: Louisville, Ky
Posts: 3,155
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
you defenitly have a stout 305 there but it is just that, a 305. i have one too but the small displacement just hinders the serious performance.
but as far as the power you should be looking at a little over 300hp and closer to 400 tq BALLPARK (a quick plug into desktop dyno)
but as far as the power you should be looking at a little over 300hp and closer to 400 tq BALLPARK (a quick plug into desktop dyno)
Thread
Thread Starter
Forum
Replies
Last Post
84z96L31vortec
Tech / General Engine
7
08-20-2017 12:16 AM