Help ID a sensor?!
#1
Help ID a sensor?!
Ok I was working on my TPI and found a melted plug with one wire its green with white stripe and the sensor kinda looks like the knock sensor this is located next to the temp sensor they are side by side on the front of the intake manafold ...
Any info is help full ...
Thanks
Chad
Any info is help full ...
Thanks
Chad
#2
Supreme Member
iTrader: (29)
Join Date: Sep 1999
Location: Location, Location!
Posts: 1,410
Likes: 0
Received 2 Likes
on
2 Posts
Car: 92 T/A 'vert
Engine: Mild .040 over L98 4 bolt mains
Transmission: Mostly stock 700R4, 2600 Vigilante
Axle/Gears: LS1 3.42
Re: Help ID a sensor?!
What year? Stock manifold? I don't see anything like that on mine.
#3
Re: Help ID a sensor?!
I have no clue on exact yr and I assume its a factory intake...
Ok here are all my casting #
block
GM5.7LG
14016379
L20
A053800
head
3998993
A50
Gm55
The tune port injection
is 90-92 No vats I also have a casting # off the intake 01305
Ok here are all my casting #
block
GM5.7LG
14016379
L20
A053800
head
3998993
A50
Gm55
The tune port injection
is 90-92 No vats I also have a casting # off the intake 01305
Last edited by Chad83; 02-26-2009 at 01:49 AM. Reason: because I had to ...
#4
Senior Member
Join Date: Apr 2007
Posts: 389
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 iroc z
Engine: 350tpi
Transmission: 700r4
Axle/Gears: 342
Re: Help ID a sensor?!
Ok I was working on my TPI and found a melted plug with one wire its green with white stripe and the sensor kinda looks like the knock sensor this is located next to the temp sensor they are side by side on the front of the intake manafold ...
Any info is help full ...
Thanks
Chad
Any info is help full ...
Thanks
Chad
can you take a picture idk what it sould be neither of my camaros have that
#6
Member
Join Date: Oct 2008
Location: Tennessee
Posts: 100
Received 0 Likes
on
0 Posts
Engine: 5.7 TPI
Transmission: 700R4
Re: Help ID a sensor?!
Without a pic... best guess for that location is a Temp sensor which has more than one wire and the oil pressure switch. Does the sensor have a hole in the block end??
EGR diagnostic switches have a green wire but not located at the front like you said. A photo would help a bit.
EGR diagnostic switches have a green wire but not located at the front like you said. A photo would help a bit.
Trending Topics
#8
Member
Join Date: Dec 2004
Location: Rhode Island
Posts: 210
Likes: 0
Received 0 Likes
on
0 Posts
Car: '87 S10 Blazer & '91 RS
Engine: L98 & L03
Transmission: 700R4 & T5
Axle/Gears: 10 Bolt/3.73/3.42
Re: Help ID a sensor?!
Knock sensor should be blue. A green/white wire is more likely to be coolant fan temp switch. They share the same style connector.
Thread
Thread Starter
Forum
Replies
Last Post
HoosierinWA
Tech / General Engine
5
10-07-2015 10:15 AM