What valve springs
#1
Member
Thread Starter
iTrader: (2)
Join Date: Nov 2009
Location: Zanesville, Ohio
Posts: 471
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Formula ws6
Engine: 370 LSX
Transmission: 4L80E with a brake and 4500 Stall
Axle/Gears: Moser 9" 4.30 gear
What valve springs
Hey guys,
I have a 350 tpi, fully forged bottom end, Home ported and gasket matched 083, lt4 hot cam, and stock rockers
I bought the lt4 hot cam valve springs, but they wont fit in the heads.
What valve springs do I need for this cam?
Where is the cheapest place to get a new chip burnt for my car?
I have a 350 tpi, fully forged bottom end, Home ported and gasket matched 083, lt4 hot cam, and stock rockers
I bought the lt4 hot cam valve springs, but they wont fit in the heads.
What valve springs do I need for this cam?
Where is the cheapest place to get a new chip burnt for my car?
#2
Supreme Member
iTrader: (13)
Join Date: Apr 2005
Location: Not in Kansas anymore
Posts: 7,733
Likes: 0
Received 11 Likes
on
11 Posts
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: What valve springs
You don't state what size spring ( dia ) you need to clear
Hot cam with 1.5 rockers is .495 lift so you need a spring that will fit your heads that has similar spec
to the hot cam spring
Min specs
.500 lift
100lb on the seat
330 lb spring rate
Hot cam with 1.5 rockers is .495 lift so you need a spring that will fit your heads that has similar spec
to the hot cam spring
Min specs
.500 lift
100lb on the seat
330 lb spring rate
#3
Junior Member
Join Date: Nov 2008
Location: Lake Mary
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Car: '87 IROC, '92 & 99 Corvette Vert.
Engine: L98, LT1, LS1
Transmission: L98 = 700R4
Axle/Gears: L98 = 3.23 G92
Re: What valve springs
I used "Z-28" springs in my recent build and they appear to be OK.
http://cgi.ebay.com/ebaymotors/HP-Z2...Q5fAccessories
CG
http://cgi.ebay.com/ebaymotors/HP-Z2...Q5fAccessories
CG
Thread
Thread Starter
Forum
Replies
Last Post