Fuel Rail o-rings
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Oct 2012
Location: SC
Posts: 725
Likes: 0
Received 0 Likes
on
0 Posts
Car: '87 IROC-Z | '99 SS
Engine: LB9 | LS1
Transmission: 700R4 | T56
Fuel Rail o-rings
I am planning on finally replacing my injectors this weekend. I am reading that I need to replace the feed/return lines that supply the fuel rail, and also the o-rings that connect the 2 sides together with the fuel pressure regulator. I also plan on replacing the diaphram this weekend as well (already have), but am confused on which o-ring kit I need to complete the task.
From my reading(s), it appears that I would be best off with the "kit". I have found what appears to be the "kit" @ O'Reilley's and AutoZone, but they don't have it in stock.
BWD - Fuel Injector Seal Kit
This kit appears to be similar in appearance to the AC Delco kit,
Am I on the right path or do I need to look for something completely different?
I will try the local Chevrolet dealers to see if they may have the AC Delco kit on hand.
From my reading(s), it appears that I would be best off with the "kit". I have found what appears to be the "kit" @ O'Reilley's and AutoZone, but they don't have it in stock.
BWD - Fuel Injector Seal Kit
This kit appears to be similar in appearance to the AC Delco kit,
Am I on the right path or do I need to look for something completely different?
I will try the local Chevrolet dealers to see if they may have the AC Delco kit on hand.
#2
Supreme Member
iTrader: (13)
Join Date: Apr 2005
Location: Not in Kansas anymore
Posts: 7,733
Likes: 0
Received 11 Likes
on
11 Posts
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: Fuel Rail o-rings
These are the actual sizes required if you come across a place that has Viton O rings for sale individually
http://webpages.charter.net/khasting...uelsystem.html
http://webpages.charter.net/khasting...uelsystem.html
#3
Senior Member
Thread Starter
iTrader: (3)
Join Date: Oct 2012
Location: SC
Posts: 725
Likes: 0
Received 0 Likes
on
0 Posts
Car: '87 IROC-Z | '99 SS
Engine: LB9 | LS1
Transmission: 700R4 | T56
Re: Fuel Rail o-rings
These are the actual sizes required if you come across a place that has Viton O rings for sale individually
http://webpages.charter.net/khasting...uelsystem.html
http://webpages.charter.net/khasting...uelsystem.html
Thread
Thread Starter
Forum
Replies
Last Post