Transmissions and Drivetrain Need help with your trans? Problems with your axle?

Difference between LO3 & LB9 T5's

Thread Tools
 
Search this Thread
 
Old 01-24-2004, 05:26 PM
  #1  
Member

Thread Starter
 
whitess's Avatar
 
Join Date: Dec 2003
Location: Frederick, CO
Posts: 131
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 SS
Engine: 305 L69
Transmission: 2004R
Axle/Gears: 7.625, 3.73
Difference between LO3 & LB9 T5's

Is there any difference between the LO3 and LB9 T5's besides the 1st gear ratio(2.95 vs 2.75)?
Larry.
Old 01-24-2004, 06:21 PM
  #2  
Supreme Member

iTrader: (1)
 
Gladstoneiroc's Avatar
 
Join Date: Mar 2003
Location: Gladstone, Missouri
Posts: 1,149
Likes: 0
Received 1 Like on 1 Post
Car: 91 Camaro RS
Engine: 5.0L TBI (ebl inside)
Transmission: T-5
Axle/Gears: 3.42 lsd 10 bolt
5th gear was .63 (LO3) and .74 (LB9).
Old 01-24-2004, 08:04 PM
  #3  
Member

Thread Starter
 
whitess's Avatar
 
Join Date: Dec 2003
Location: Frederick, CO
Posts: 131
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 SS
Engine: 305 L69
Transmission: 2004R
Axle/Gears: 7.625, 3.73
Thanks. So strength wise the same then.
Larry.
Old 01-24-2004, 08:16 PM
  #4  
Senior Member

 
Beast5spdGTA's Avatar
 
Join Date: Jun 2000
Location: Palm Bay, FL
Posts: 781
Likes: 0
Received 0 Likes on 0 Posts
Car: 2007 Corvette Z06
Engine: LS7
Transmission: 6 speed
If 89 or later, they should both be world class and the 2.95 is probably a little weaker b/c of the multiplying ratio. I'd consider them the same strength and there is definately a difference you can feel with those 2 ratios changed. I believe my LO3 with 3.73s cruises at a lower rpm than my GTA with 3.42s.

GTA @ 80 mph = 3000rpm
LO3 @ 80 mph ~2700-2800rpm
Old 01-24-2004, 08:36 PM
  #5  
Member

Thread Starter
 
whitess's Avatar
 
Join Date: Dec 2003
Location: Frederick, CO
Posts: 131
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 SS
Engine: 305 L69
Transmission: 2004R
Axle/Gears: 7.625, 3.73
I kind of figured they'd be similar. When I go to the T5 it will be replacing a 2004R that has about the same 1st gear (2.74) as the TPI trans and about the same OD ratio (.67) as the TBI one. I can always change the OD gear. Should only be about 200 RPM difference though on the highway. The 2.75 low should be better with my 3.73 rear gears.
Thanks all.
Larry.
Old 01-24-2004, 08:45 PM
  #6  
TGO Supporter
iTrader: (1)
 
novass's Avatar
 
Join Date: Nov 2002
Location: Grand Island, NY
Posts: 1,132
Likes: 0
Received 1 Like on 1 Post
Car: 1990 Formula
Engine: 305 TPI
Transmission: WC T5
Re: Difference between LO3 & LB9 T5's

Originally posted by whitess
Is there any difference between the LO3 and LB9 T5's besides the 1st gear ratio(2.95 vs 2.75)?
Larry.
From every thing that I have read and seen, all v8 t5's were 2.95 1st gear, there was some misinformation printed that some had 2.75 first. The only difference is the 5th gear

RPO
m39 transmission .63 OD
MK6 transmission .73 OD

look here

Last edited by novass; 01-24-2004 at 08:51 PM.
Old 01-24-2004, 09:17 PM
  #7  
Member

Thread Starter
 
whitess's Avatar
 
Join Date: Dec 2003
Location: Frederick, CO
Posts: 131
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 SS
Engine: 305 L69
Transmission: 2004R
Axle/Gears: 7.625, 3.73
My initial info came from thirdgenresource and showed that the WC TPI T5's from 89-92 were the 2.75 1st. I looked around some more and that's the only one that showed the 2.75. What the heck, eh? I was hoping for the 2.75 but if it doesn't exist then the 2.95 will have to do.
Thanks,
Larry.
Old 01-25-2004, 10:51 AM
  #8  
jmd
Supreme Member

iTrader: (4)
 
jmd's Avatar
 
Join Date: Jul 2000
Location: Aridzona
Posts: 6,292
Received 44 Likes on 43 Posts
Car: `86 SS / `87 SS
Engine: L69 w/ TPI on top / 305 4bbl
Transmission: `95 T56 \ `88 200-4R
Originally posted by whitess
I kind of figured they'd be similar. When I go to the T5 it will be replacing a 2004R that has about the same 1st gear (2.74) as the TPI trans and about the same OD ratio (.67) as the TBI one. I can always change the OD gear. Should only be about 200 RPM difference though on the highway. The 2.75 low should be better with my 3.73 rear gears.
Thanks all.
Larry.
Hey Larry, hi from another Manual Monte guy. (we've talked before.)

Don't worry about trying to find the 2.75 first gear boxes. Most of the V8 T5s are 2.95 first / .62 fifth. The first gear WILL feel stronger than the first in the 200-4R. You'll like the 2.95 first gear with the 3.73s just fine.
Old 01-25-2004, 10:55 AM
  #9  
Member

Thread Starter
 
whitess's Avatar
 
Join Date: Dec 2003
Location: Frederick, CO
Posts: 131
Likes: 0
Received 0 Likes on 0 Posts
Car: 85 SS
Engine: 305 L69
Transmission: 2004R
Axle/Gears: 7.625, 3.73
Thanks, I forgot about the swap you did.
Larry.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
69GTOby
Tech / General Engine
40
04-18-2016 02:34 PM
64Chief
Transmissions and Drivetrain
4
09-12-2015 08:05 AM
Stroopwafel
Tech / General Engine
7
09-11-2015 06:38 AM
J.C. Denton
Body
0
09-08-2015 05:35 PM
Vassago
Convertibles
15
09-04-2015 09:37 PM



Quick Reply: Difference between LO3 & LB9 T5's



All times are GMT -5. The time now is 02:06 AM.