can't remember what these are for....
06-27-2007, 12:11 AM
#2
Senior Member
Join Date: Sep 2003
Location: Mo.
Posts: 892
Likes: 0
Received 0 Likes
on
0 Posts
Car: Z/28
Engine: 355
Transmission: Turbo 400
Axle/Gears: 3.73
Re: can't remember what these are for....
Top pic is the factory torque arm mount thats is bolted to the back of the transmission.
The bottom pic is the exhaust hanger that is bolted to the otherside of the trans directly opposite of the torque arm mount. It supports the cat/converter.
The bottom pic is the exhaust hanger that is bolted to the otherside of the trans directly opposite of the torque arm mount. It supports the cat/converter.
06-27-2007, 12:14 AM
#3
Member
Thread Starter
Join Date: Nov 2004
Location: California
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
Re: can't remember what these are for....
would my 700r4 equipped 87 iroc have these same items + the torque arm?
06-27-2007, 12:45 AM
#4
06-27-2007, 05:58 AM
#5
Re: can't remember what these are for....
Here's a pic of the torque arm on a T-5. Note the mount at the front of the arm:
https://www.thirdgen.org/forums/atta...what-drive.jpg
The hanger looks shot. Take a look at the fix:
https://www.thirdgen.org/forums/exha...ger-fix-p.html
JamesC
https://www.thirdgen.org/forums/atta...what-drive.jpg
The hanger looks shot. Take a look at the fix:
https://www.thirdgen.org/forums/exha...ger-fix-p.html
JamesC
Thread
Thread Starter
Forum
Replies
Last Post