700R4 to T-5 Questions
03-11-2009, 06:08 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2009
Location: Shippensburg PA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Firebird
Engine: 305 TBI
Transmission: T-5
700R4 to T-5 Questions
Hello, I am currently in the process of swapping my 700r4 to a t-5, and have the tranny all installed. However, there are 2 plugs coming to the tranny that do not fit, 1st is a 2 prong connector, and 2nd is a 4 prong connector. Which is the backup plug, and which is the torque plug. Then, should I jump the wires on the torque plug so the car won't stall. And lastly where do I find the speedo plug? This car came with no tranny in it, so I did not take it apart. Any help would be much appreciated. Thanks
-Dan-
-Dan-
03-13-2009, 11:55 AM
#2
Member
Join Date: Mar 2008
Location: Mocksville, North Carolina
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro
Engine: 350 .030 over 298 cam 9.1 Flat tops
Transmission: T5 swap complete
Axle/Gears: 3.73 posi the 4.10s are history
Re: 700R4 to T-5 Questions
The 4 prong plug is for convertor lock up and back up lights, the 2 prong is for the vss. If you do a search you can find a link for the wiring diagram. I have read where some guys have not had any issues running a T5 in an automatic car with a ECM. I have no need for an ECM in my 92
Thread
Thread Starter
Forum
Replies
Last Post
Iroc8t8
TPI
43
08-26-2015 08:14 AM
