need help with dakota box on t56
#1
Member
Thread Starter
iTrader: (4)
Join Date: Aug 2005
Location: edmonton alberta canada
Posts: 326
Likes: 0
Received 1 Like
on
1 Post
Car: 91 rs,1 92 rs,92 b4c/1le
Engine: 5.0tbi,5.7 tune port/5.0tpi
Transmission: 5spdx2 and t56
Axle/Gears: 3.08,3.73,3.42
need help with dakota box on t56
anyone want to share how the hooked there dakoata box up power and ground is easy i have a 91 camaro so i have the yellow to the output but not sure where to connect ground and how to connect t56 speed sensor and help??
thanks
thanks
#2
Supreme Member
iTrader: (3)
Re: need help with dakota box on t56
I just did this but with an A4 and using a TCI transmission controller.
If I had your system I would first try it this way using application #2 in the directions. The yellow wire from the VSS would go to Speed Input Signal. I would put the Purple Wire from the VSS to ground.
I would take the yellow wire from the ECM(B10 in my case) and put it in out 2. I would take the purple wire from the ECM(B9 in my case) and put it in sensor ground.
If I had your system I would first try it this way using application #2 in the directions. The yellow wire from the VSS would go to Speed Input Signal. I would put the Purple Wire from the VSS to ground.
I would take the yellow wire from the ECM(B10 in my case) and put it in out 2. I would take the purple wire from the ECM(B9 in my case) and put it in sensor ground.
Thread
Thread Starter
Forum
Replies
Last Post
camaro1185
Engine/Drivetrain/Suspension Parts for Sale
4
10-26-2015 06:51 AM
topteam54
Engine/Drivetrain/Suspension Parts for Sale
9
10-06-2015 12:21 AM
el_muerte
Engine/Drivetrain/Suspension Wanted
0
09-16-2015 12:01 AM
mygta87
Engine/Drivetrain/Suspension Wanted
0
09-14-2015 10:36 PM