700R4 - Starting in 2nd gear while in D
07-23-2009, 07:56 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2007
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
700R4 - Starting in 2nd gear while in D
Hey everyone, After rebuilding my tranmission, it seems to be taking off in 2nd gear while in the drive position, if i put it into Manual 1, it will take off in first then shift into 2nd, but in D it takes off in 2nd, the rest of the shift are working like they should be and everyting else seems to be fine? I took the governor out and made sure the valve was free in there, its a brand new vette govrnor but checked it anyways, Any ideas? Thanks in advance
Mike
Mike
07-25-2009, 07:36 AM
#2
Senior Member
iTrader: (2)
Join Date: May 2005
Location: Baltimore, MD
Posts: 841
Likes: 0
Received 0 Likes
on
0 Posts
Car: 09 Cobalt SS Sedan. 92 Z28 vert
Engine: 2.0T EFR6758; 5.0TT T3/T4 8psi
Transmission: F40; 700r4
Axle/Gears: 3.76 LSD; 3.23 posi
Re: 700R4 - Starting in 2nd gear while in D
I had the exact same problem and never solved it...subscribed.
08-12-2009, 01:01 AM
#3
Senior Member
Join Date: Mar 2003
Location: vacaville,ca
Posts: 847
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1988 camaro z28,1997 camaro lt1
Engine: 355 afr 195 heads,tpis big mouth
Transmission: 700r-4 built by me 3-4 z pack
Axle/Gears: 3.42
Re: 700R4 - Starting in 2nd gear while in D
check the govenor maybe sticking
Hey everyone, After rebuilding my tranmission, it seems to be taking off in 2nd gear while in the drive position, if i put it into Manual 1, it will take off in first then shift into 2nd, but in D it takes off in 2nd, the rest of the shift are working like they should be and everyting else seems to be fine? I took the governor out and made sure the valve was free in there, its a brand new vette govrnor but checked it anyways, Any ideas? Thanks in advance
Mike
Mike
Thread
Thread Starter
Forum
Replies
Last Post
