swaping brakes parts???
#1
Junior Member
Thread Starter
Join Date: Nov 2008
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro rs, 1988 saab 900
Engine: 305 tbi 5.0L V8
Transmission: 700r4
swaping brakes parts???
hey all,
going to be doing a posi swap tomorrow and heres my little "problem"
the posi that is going in is a drum unit, the rear thats in is a drum unit.... on the posi the driver side brake setup crumbled when i took the drum off.(springs and brackets and shoes) question is can i take the brake setup off my old rear and put it on the new one... both are drum setups. any help would be great before i do the swap..
thanks
-Zach
going to be doing a posi swap tomorrow and heres my little "problem"
the posi that is going in is a drum unit, the rear thats in is a drum unit.... on the posi the driver side brake setup crumbled when i took the drum off.(springs and brackets and shoes) question is can i take the brake setup off my old rear and put it on the new one... both are drum setups. any help would be great before i do the swap..
thanks
-Zach
#2
Supreme Member
Join Date: Jul 2003
Location: KY
Posts: 1,236
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87IROC, 740iBMW, 328iBMW, 86GMC
Engine: 5.7, 4.4LV8, 2.8, 6.0
Transmission: Manuals & Auto's
Axle/Gears: 3.27, 3.42
Re: swaping brakes parts???
Have you checked / compared the axle spline count?
#3
Junior Member
Thread Starter
Join Date: Nov 2008
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 camaro rs, 1988 saab 900
Engine: 305 tbi 5.0L V8
Transmission: 700r4
by axle spline count..... you mean? sorry if i don't know.. but i have helped a few friends in the past taking a rear out and putting one in so i know the basics of doing so, i made sure i got matching gears, now is 3.23 and the new posi is also 3.23... that's about it
#4
Supreme Member
Join Date: Jul 2003
Location: KY
Posts: 1,236
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87IROC, 740iBMW, 328iBMW, 86GMC
Engine: 5.7, 4.4LV8, 2.8, 6.0
Transmission: Manuals & Auto's
Axle/Gears: 3.27, 3.42
Re: swaping brakes parts???
Not sure what car you're working on or what you have as a transplant posi unit but, the 90-92's had a higher spline count on the axles & limited slip (posi) unit. Just asking if your axles will slip into and accept the posi you want to use..?
Otherwise, your drum brake parts should swap no problem.
Otherwise, your drum brake parts should swap no problem.
#5
Senior Member
iTrader: (5)
Join Date: Sep 2006
Location: Austria
Posts: 951
Likes: 0
Received 2 Likes
on
2 Posts
Car: 84 TA / 89 Formula
Engine: LS1 / L03
Transmission: T56 / 700R4
Axle/Gears: 3.73 / 3.27
Re: swaping brakes parts???
https://www.thirdgen.org/forums/tran...-gen-10-a.html last post has some info you might need. hth
Thread
Thread Starter
Forum
Replies
Last Post
hectre13
Engine/Drivetrain/Suspension Parts for Sale
2
12-11-2023 08:14 AM
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM