What Not To Do!!!!!!!!!!
#1
Member
Thread Starter
Join Date: Aug 2005
Location: Salisbury NC
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro
Engine: 3.4 Liter
Transmission: 5 speed
Axle/Gears: stock
What Not To Do!!!!!!!!!!
Well everyone after 2 weeks of looking for a 3.4 that I couldn't find I finally broke down my 2.8 to get it ready for the shop. When I got down to the crank you won't believe the way the bearings looked. The idot that I brought the car from put in a new crank but didn't change the bearings. What an idiot.
So that was the excessive knocking noise I was hearing. The bearings were over lapping on each other on the #4 piston. I was surprised the engine even ran at all. I will be taking everything to the shop tomorrow so I should be up and running by next week I hope.
Pictures are posted at my link:
http://www.cardomain.com/ride/2113416/1
So that was the excessive knocking noise I was hearing. The bearings were over lapping on each other on the #4 piston. I was surprised the engine even ran at all. I will be taking everything to the shop tomorrow so I should be up and running by next week I hope.
Pictures are posted at my link:
http://www.cardomain.com/ride/2113416/1
#3
Supreme Member
Join Date: Jul 2001
Location: Palm Bay, Florida, USA
Posts: 3,931
Likes: 0
Received 0 Likes
on
0 Posts
Car: 95 E-150 & 07 Kawasaki ZX-6R
Engine: A slow one & a fast one
Transmission: A bad one & a good one
Axle/Gears: A weak one & a chained one
Oh my ***........
#6
Supreme Member
Join Date: Jan 2001
Location: ****SoCal, USA****
Posts: 7,604
Likes: 0
Received 0 Likes
on
0 Posts
Who said 3.4s are to fall from heaven into your machinist hands?
KEEP LOOKING FOR THAT 3.4!
WHY WASTE HARD EARNED MONEY!?
JUST KEEP PHONING WRECKING YARDS & LOOK IN PAPERS FOR 93-95 WRECKS!
Think of it this way?
Ya wanna spend money on a date with a dog or a Babe?
There's a place out west here that'll sell ya a remachined 3.4 for $2,000!
I am so sure there are some by you, too.
KEEP LOOKING FOR THAT 3.4!
WHY WASTE HARD EARNED MONEY!?
JUST KEEP PHONING WRECKING YARDS & LOOK IN PAPERS FOR 93-95 WRECKS!
Think of it this way?
Ya wanna spend money on a date with a dog or a Babe?
There's a place out west here that'll sell ya a remachined 3.4 for $2,000!
I am so sure there are some by you, too.
#7
Member
Thread Starter
Join Date: Aug 2005
Location: Salisbury NC
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro
Engine: 3.4 Liter
Transmission: 5 speed
Axle/Gears: stock
Originally posted by KED85
Who said 3.4s are to fall from heaven into your machinist hands?
KEEP LOOKING FOR THAT 3.4!
WHY WASTE HARD EARNED MONEY!?
JUST KEEP PHONING WRECKING YARDS & LOOK IN PAPERS FOR 93-95 WRECKS!
Think of it this way?
Ya wanna spend money on a date with a dog or a Babe?
There's a place out west here that'll sell ya a remachined 3.4 for $2,000!
I am so sure there are some by you, too.
Who said 3.4s are to fall from heaven into your machinist hands?
KEEP LOOKING FOR THAT 3.4!
WHY WASTE HARD EARNED MONEY!?
JUST KEEP PHONING WRECKING YARDS & LOOK IN PAPERS FOR 93-95 WRECKS!
Think of it this way?
Ya wanna spend money on a date with a dog or a Babe?
There's a place out west here that'll sell ya a remachined 3.4 for $2,000!
I am so sure there are some by you, too.
Its not about getting more power to me. If I wanted more power I would put in the 350 that my dad gave me for the car. Just want the car running like new and keep it as original as possible. I am on a budget anyway.
I did look but its not that important to me. So I will just go with what I have. Thanks anyway.
Trending Topics
#8
Supreme Member
Join Date: Jan 2001
Location: ****SoCal, USA****
Posts: 7,604
Likes: 0
Received 0 Likes
on
0 Posts
3.4 have been scored for as little as $210
High is $900
Average is $500 range.
To bring back to great condition costs about $100-$150 (chain/pump, gasket kit, other things).
Same effort as installing any "same" engine.
High is $900
Average is $500 range.
To bring back to great condition costs about $100-$150 (chain/pump, gasket kit, other things).
Same effort as installing any "same" engine.
Last edited by KED85; 10-05-2005 at 08:36 AM.
#10
Supreme Member
Join Date: Feb 2005
Location: Hawaii
Posts: 2,299
Received 157 Likes
on
146 Posts
Car: 89' Firebird
Engine: 3.4L V-6
Transmission: 700-R4
Axle/Gears: Whatever came stock!
Originally posted by KED85
Who said 3.4s are to fall from heaven into your machinist hands?
KEEP LOOKING FOR THAT 3.4!
WHY WASTE HARD EARNED MONEY!?
JUST KEEP PHONING WRECKING YARDS & LOOK IN PAPERS FOR 93-95 WRECKS!
Think of it this way?
Ya wanna spend money on a date with a dog or a Babe?
There's a place out west here that'll sell ya a remachined 3.4 for $2,000!
I am so sure there are some by you, too.
Who said 3.4s are to fall from heaven into your machinist hands?
KEEP LOOKING FOR THAT 3.4!
WHY WASTE HARD EARNED MONEY!?
JUST KEEP PHONING WRECKING YARDS & LOOK IN PAPERS FOR 93-95 WRECKS!
Think of it this way?
Ya wanna spend money on a date with a dog or a Babe?
There's a place out west here that'll sell ya a remachined 3.4 for $2,000!
I am so sure there are some by you, too.
Seeing that the 3.4 is a direct swap more less....might as well go with a 3.4?
#11
Member
Join Date: Jun 2005
Location: Punta Gorda Florida
Posts: 267
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 RS
Engine: 5.0 tbi
Transmission: 700r4
I'll take the date with the dog......won't complain as much as a babe.......but then again some chics don't complain much either.
but I agree at least get the 3.1 crank
but I agree at least get the 3.1 crank
#12
Member
Thread Starter
Join Date: Aug 2005
Location: Salisbury NC
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro
Engine: 3.4 Liter
Transmission: 5 speed
Axle/Gears: stock
Well I have given in to all the mounds of advice and did make an upgrade. Even though I didn't find a 3.4 I did score a 3.1 crank and pistons. Just so happened that the guy doing the machine work had a 3.1 block that someone left at his house so he will be hooking me up. So I'm happy about that and can't wait to get my baby back on the road.
Will keep you posted!
Will keep you posted!